Elite.Parts

Description

Nexcom PEAK 765VL2 PICMG 1.0 Full-Size SBC, LGA775 Intel Core™ 2 Duo/Pentium® 4/Pentium® D/Celeron® D 533/800/1066 MHz
w/4GB DDR2 DIMM, VGA, 2x GbE LAN, 4x SATA

Part Number

PEAK 765VL2

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

CPU CARDS » PICMG BOARDS

Specifications

BIOS

Award System BIOS; Plug & Play support; 8M-bit flash ROM

Board Type

Full Size

CPU

Supports Intel® LGA775 Core 2 Duo /Pentium® 4 /Pentium® D /Celeron® D processors; Intel® Embedded Processors List (Intel® Longevity CPU), Intel® Core™ 2 Duo Processor E6400 & E4300 & E2160, Intel® Pentium® 4 Processor 651 & 551 & 531, Intel® Celeron® D Processor 352 & 341, Intel® Celeron® Processor 440; 533/800/1066 MHz System Bus

Dimensions

338.58 mm(L)x 122mm(W); (13.3” x 4.8”)

Display Interface

Intel® Q965 GMCH Integrated Intel® GMA 3000; Max 256 MB of DVMT for graphics memory; CRT:1 x DB15 VGA connector, Resolution up to 2048 x 1536

Ethernet

2 x Intel® 82573L PCI Express Gigabit Ethernet LAN; 2 x RJ45 with LED; Supports Boot From LAN (PXE); Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only)

HyperTransport™ Technology

Through PCI to ISA Interface (ITE 8888); No ISA Master Devices but ISA DMA Devices; Maximize ISA Slot support up to 3

I/O

Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH; 2-pin header for SMB; 2-pin header for reset; 2-pin headerfor power on switch; 2-pin header for power LED; 2-pin header for HDD LED

Operating Temperature

0°C to 60°C

Parallel Port

1 port, with 2x13 box-header(2.0mm)

Power Supply

Power source from backplane through PCI/ISA Golden Finger; Supports both AT or ATX Power Supplies (Automatically, BIOS default: AT Mode); When change to ATX, the BIOS default setting is as follow:POWER -SUPPLY TYPE--> [ATX] AUTO PWR-FAILURE RESUME ->[ON]

Processor

Intel Celeron

PS2

1 x 6-pin JST connector(2.0mm) for KB/ Mouse

Relative humidity

10% to 90% (Non-condensing); Non-operating 5%~95%, non-condensing

RTC

On-chip RTC with battery backup; 1 x External Li Battery; Torrance less than 2sec (24 hours) under 25°C

SATA

4 ports (without Raid function)

Serial Port

2 ports, with 2x5 box header(2.0mm), supports RS232 only

Storage Temperature

-20°C to 85°C

System Chipset

Intel® Q965 Graphics Memory Controller Hub(GMCH); Intel® 82801HB(ICH8) I/O Controller Hub

System Memory

2 x 240-pin DIMM, support Dual channel 533/667/800 MHz SDRAM DDR2 memory up to 4GB. Note: Maximum 4 GB. Actual memory size is dynamic based on the OS I/O resource allocation

System Monitor

4 voltage (For +3.3V, +5V, +12V, Vcore); 3 Temperatures (CPU, two external Temperature Sensor); 3 FANs speed (CPU, System and MCH FANs)

USB

6 x USB 2.0, 2 ports through I/O bracket, 4 ports through 1x6 JST

Watchdog Timer

Watchdog timeout can be programmable by Software from 1 second to 255 seconds; Tolerance 15% under room temperature 25°C

Features

2 x 240-pin DIMM, Supports Dual Channel 533/667/800 MHz DDR2
2 x COM Ports
2 x Intel® 82573L PCI Express Gigabit Ethernet LAN
4 x SATA
6 x USB 2.0
Intel® Q965 and ICH8 chipset
Single Socket LGA775, Supports Intel® Core™ 2 Duo with 533/800/1066 MHz FSB

Datasheet

PEAK765VL-9708856902.pdf

967 KiB

Download

Extracted Text

® Intel Core™ 2 Duo LGA775 with 2 x PCI Express PEAK 765VL2 Gigabit LAN/ SATA/ VGA/ USB2.0 ® ® ® Intel LGA775 Core 2 Duo / Pentium 4 / Pentium D / ® ® Celeron D processors with 533/800/1066 MHz 2 x 240-pin DDR2 DIMM Intel 82801HB(ICH8) 4 x SATA USB2.0 COM PIO KB/MS USB 2.0 LAN1 LAN2 VGA ® Intel Q965 Main Features Main Features Main Features ® Single Socket LGA775, Supports Intel Core™ 2 Duo with 4 x SATA, 6 x USB 2.0, 2 x COM Ports 533/800/1066 MHz FSB ® Intel Q965 and ICH8 chipset 2 x 240-pin DIMM, Supports Dual Channel 533/667/800 MHz DDR2 ® 2 x Intel 82573L PCI Express Gigabit Ethernet LAN Product Overview ® ® PEAK 765VL2 is the PICMG 1.0 full-size Single Board Computer (SBC), which support Intel Core™2 Duo technology. Featuring Intel Q965 and ICH8 chipsets, the PEAK ® ® ® ® 765VL2 supports socket LGA775 of Intel Core 2 Duo/Pentium 4/Pentium D/Celeron D processor with 533/800/1066 MHz FSB. ® The Intel Q965 supports dual channel non-ECC DDR2 533/667/800 MHz memory up to 4 GB maximum with two DIMM slots and an integrated graphics controller. The South Bridge ICH8 manages SATA HDD ports, and parallel port. Furthermore, it supports other versatile I/O ports such as two serial ports, six USB ports and two PCI Express Gigabit LAN ports. Speciﬁ cations CPU Support On-board LAN ® ® ® ® ® Supports Intel LGA775 Core 2 Duo / Pentium 4 / Pentium D / Celeron D 2 x Intel 82573L PCI Express Gigabit Ethernet LAN processors 2 x RJ45 with LED ® ® Intel Embedded Processors List (Intel Longevity CPU) Supports Boot From LAN (PXE) ® Intel Core™ 2 Duo Processor E6400 & E4300 & E2160 Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only) ® ® Intel Pentium 4 Processor 651 & 551 & 531 ® ® Intel Celeron D Processor 352 & 341 Display ® ® Intel Celeron Processor 440 ® ® Intel Q965 GMCH Integrated Intel GMA 3000 533/800/1066 MHz System Bus Max 256 MB of DVMT for graphics memory CRT:1 x DB15 VGA connector, Resolution up to 2048 x 1536 Main Memory 2 x 240-pin DIMM, support Dual channel 533/667/800 MHz SDRAM DDR2 I/O Interface memory up to 4 GB USB 2.0: 6 ports, 2 ports through I/O bracket, 4 ports through 1x6 JST Note: Maximum 4 GB. Actual memory size is dynamic based on the OS Serial port: 2 ports, with 2x5 box header(2.0mm) , supports RS232 only I/O resource allocation Parallel port: 1 port, with 2x13 box-header(2.0mm) Chipset PS2: 1 x 6-pin JST connector(2.0mm) for KB/ Mouse ® Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH Intel Q965 Graphics Memory Controller Hub (GMCH) ® 2-pin header for SMB; 2-pin header for reset; 2-pin headerfor power on switch Intel 82801HB (ICH8) I/O Controller Hub 2-pin header for power LED; 2-pin header for HDD LED BIOS On-board buzzer / IrDA (share with COM2) Award System BIOS I/O on bracket Plug & Play support 1 x DB15 VGA connector 2 x RJ45 GbE port 8M-bit ﬂ ash ROM 2 x USB2.0 PICMG 1.0 Block Diagram ® Intel LGA775 Core 2 Duo / Pentium® 4 / Pentium® D / Celeron® D processors 533/800/1066 MHz Channel A DDR2 DIMM ® DDR2 VGA Intel Q965 533/667/800 Channel B DDR2 DIMM 2GB/S 2 x USB2.0 4 x SATA (Bracket) PCI ® Intel 82801HB 4 x USB2.0 GOLDEN (ICH8) (JST connector) Parallel FINGER Port KB/MS ISA Super IO (box header) GOLDEN ITE8888 FINGER LAN1 LAN2 2 x COM (82573L) (82573L) Storage Dimensions SATA: 4 ports (without Raid function) 338.58 mm (L) x 122 mm (W) (13.3” x 4.8”) Watchdog Timer Environment Watchdog timeout can be programmable by Software from 1 second to 255 Board level operating temperature: 0°C to 60°C seconds Storage temperature: -20°C to 85°C Tolerance 15% under room temperature 25°C Relative humidity: 10% to 90% (Non-condensing) Non-operating 5%~95%, non-condensing On-board RTC Certifications On-chip RTC with battery backup 1 x External Li Battery CE approval Torrance less than 2sec (24 hours) under 25˚C FCC Class A ISA Support Ordering Information Through PCI to ISA Interface (ITE 8888) PEAK 765VL2 (P/N: 10P0765VL01X0) RoHS Compliant No ISA Master Devices but ISA DMA Devices ® ® PICMG 1.0 Full-Size SBC, Intel Q965 Chipset, Intel LGA775 Core 2 Duo / Maximize ISA Slot support up to 3 ® ® ® Pentium 4 / Pentium D / Celeron D processors with 533/800/1066 MHz, Max. 4GB DDR2 DIMM, VGA integrated , 2 x GbE, 4 x SATA Ports System Monitor 4 voltage (For +3.3V, +5V, +12V, Vcore) 3 Temperatures (CPU, two external Temperature Sensor) 3 FANs speed (CPU, System and MCH FANs) Power Input Power source from backplane through PCI/ISA Golden Finger Supports both AT or ATX Power Supplies (Automatically, BIOS default :AT Mode) When change to ATX, the BIOS default setting is as follow: POWER -SUPPLY TYPE--> [ATX] AUTO PWR-FAILURE RESUME -->[ON] +3.3V is Converted from +5V and not directly from Backplane or Power Supply +5Vsb (Standby power) is connected from Backplane through 3pins Connectors 4 Pins +12V Power Input Connector PICMG 1.0 We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products