Elite.Parts

Description

ATX socket 478 Server Board supports Intel®Pentium 4 Processor with 10/100 LAN x 1 (Intel®82551QM) + Gigabit LAN x 1 (by CSA)

Part Number

NEX732L2G

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

CPU CARDS » ATX BOARD

Specifications

BIOS

Award System BIOS Plug & Play support Advanced Power Management support Advanced Confi guration & Power Interface support Jumperless for CPU FSB 4 Mbit fl ash ROM Supports Power On After Power Failure

Certifications

CE approval FCC Class A

Chipset

Intel® 875P/6300ESB Chipsets Firmware Hub (FWH) 4 Mbit fl ash ROM x 1

CPU

Single mPGA478 ZIF socket Intel® Pentium® 4 Processor with HT Technology, with 1M L2 cache (Intel® Prescott (0.09µ process) / Intel® Pentium® 4 Processor with 256/512K L2 cach (Northwood) on die Socket 478 processor supports 400/533/800 MHz FSB, CP

Dimensions

ATX form factor: 305 mm (L) x 244 mm (W) (12" x 9.6")

Display Interface

One on-board AGP 8X slot

Ethernet

Intel® 82551QM 10/100 Ethernet controller x 1 Optional Intel 82547GI Gigabit Ethernet controller x 1 (dedicated by CSA port directly from the Intel® 875P) Compliant with PCI V2.1/2.2. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab RJ45 with LE

HyperTransport™ Technology

Through PCI to ISA interface No ISA Master Device support No ISA DMA support Maximum of 3 ISA slots supported

I/O

Winbond W83627HF Super I/O on board SIO x 4, DB9 x 2, 10-pin header x 2, PIO x 1, Bi-directional, EPP/ECP support, DB25 x 1 Floppy Disk controller: 3.5” 1.44 MB/2.88 MB support, 34-pin connector x 1 On-chip enhanced IDE x 2, PIO up to mode 4, Ult

Memory

Four 184-pin DDR DIMM sockets, supports up to 4 GB unbuffered ECC DDR 266/333/400 SDRAM. Note: Maximum 4 GB. Actual memorey size is dynamic based on the OS I/O resource allocation Available bandwidth up to 3.2 GB/s (DDR 400) for single-channel mode

Operating Temperature

Operating temperature: 0°C to 60°C Storage temperature: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)

Power Consumption

+3.3 V: 11 A +5 V: 17 A +12 V: 14 A for Prescott P4 or 11 A for Northwood P4 5 Vsb: 2 A

RTC

On-chip real time clock with battery back up

SSD

On-board reserved power pin for DOM (Disk On Module)

System Monitor

System monitor controller derived from Winbond W83627HF super I/O 7 voltage (For +3.3 V, +5 V, +12 V, Vcore, +2.5 V, +5 Vsb) 3 fan speed (For CPU x 1, system x 2) 3 temperature (For CPU x 1, system x 2)

Features

1 x On-board AGP Slot, 3 x PCI-X Slots, 3 x PCI Slots
Intel® 875P/6300ESB Chipsets
Intel® Pentium® 4 Processor with 400/533/800 MHz FSB, CPU Speed Up to 3.6 GHz
Standard ATX Form Factor
Supports 4 x DIMM Dual Channel DDR 266/333/400 SDRAM Memory up to 4GB

Datasheet

NEX732L2-23696264G.pdf

1081 KiB

Download

Extracted Text

® ® NEX 732L2G Intel Pentium 4 ATX Board with AGP/ 3 x PCI-X/ 3 x PCI Slots ® Intel 6300ESB I/O Controller Hub Serial ATA x 2 DDR DIMM x 4 up to 4 GB IDE x 2 ® Intel 875P Floppy Port 20-pin ATX Power Connector AGP 8X Slot x 1 4-pin ATX Power Connector COM Port x 2 PCI-X Slot x 3 ® Socket for Intel P4 processors PS/2 KB/Mouse COM Port x 2 USB 2.0 Port x 4 Audio Phone Jack PCI Slot x 3 PIO x 1 LAN x 2 Main Features ® ® Intel Pentium 4 Processor with 400/533/800 MHz FSB, CPU 1 x On-board AGP Slot, 3 x PCI-X Slots, 3 x PCI Slots Speed Up to 3.6 GHz Standard ATX Form Factor Supports 4 x DIMM Dual Channel DDR 266/333/400 SDRAM Memory up to 4GB ® Intel 875P/6300ESB Chipsets Product Overview ® ® The NEX 732L2G is an industrial ATX board that supports Intel Pentium 4 processors with 400/533/800 MHz FSB and various frequencies and L2 caches. The product incorporates an Intel 875P and 6300ESB chipset and supports unbuffered ECC DDR 266/333/400 memory up to 4 GB, three 33-bit/33 MHz PCI slots, three 64-bit/66 MHz PCI-X slots, one AGP 8X slot, two 40-pin IDE connectors, and other versatile I/O ports such as one parallel port, a ﬂ oppy port, two serial ports, four USB 2.0 ports, dual LAN ports, audio interface, and more. The NEX 732L2G offers various processor selections and multiple I/O ports and is the best choice for industrial applications requiring superior performance and reliability. Speciﬁ cations Advanced Power Management support CPU Support Advanced Confi guration & Power Interface support Single mPGA478 ZIF socket ® ® ® Jumperless for CPU FSB Intel Pentium 4 Processor with HT Technology, with 1M L2 cache (Intel ® ® 4 Mbit ﬂ ash ROM Prescott (0.09µ process) / Intel Pentium 4 Processor with 256/512K L2 cache (Northwood) on die Supports Power On After Power Failure Socket 478 processor supports 400/533/800 MHz FSB, CPU speeds up to 3.6 On-board LAN GHz ® Supports Hyper-Threading technology (for all Prescott processors, or Northwood Intel 82551QM 10/100 Ethernet controller x 1 3.06 GHz) Optional Intel 82547GI Gigabit Ethernet controller x 1 (dedicated by CSA port ® directly from the Intel 875P) Main Memory Compliant with PCI V2.1/2.2. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE Four 184-pin DDR DIMM sockets, supports up to 4 GB unbuffered ECC DDR 802.3ab 266/333/400 SDRAM RJ45 with LED connector x 2 Note: Maximum 4 GB. Actual memorey size is dynamic based on the OS I/O resource allocation Display Available bandwidth up to 3.2 GB/s (DDR 400) for single-channel mode and One on-board AGP 8X slot 6.4 GB/s (DDR 400) in dual-channel mode I/O Interface Chipset Winbond W83627HF Super I/O on board ® Intel 875P/6300ESB Chipsets SIO x 4, DB9 x 2, 10-pin header x 2, Firmware Hub (FWH) 4 Mbit ﬂ ash ROM x 1 PIO x 1, Bi-directional, EPP/ECP support, DB25 x 1 Floppy Disk controller: 3.5” 1.44 MB/2.88 MB support, 34-pin connector x 1 BIOS On-chip enhanced IDE x 2, PIO up to mode 4, Ultra ATA 33/66/100 support, total Award System BIOS of 4 EIDE device support, 40-pin connector x 2 Plug & Play support Industrial ATX Motherboards Block Diagram PS/2 Keyboard/Mouse Mini-Din connector x 2 Dimensions GPIO (4 in, 4 out) pin header ATX form factor: 305 mm (L) x 244 mm (W) (12" x 9.6") On-board USB 2.0 ports x 4 Environment On-board buzzer x 1 2-pin power on button switch Operating temperature: 0°C to 60°C On-board 4-pin header for SM bus (I2C) Storage temperature: -20°C to 80°C On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock and Relative humidity: 10% to 90% (Non-condensing) 2-pin for power LED, 2-pin for IDE HDD Led Certifications Serial ATA support, SATA connector x 2; data transfer bandwidth up to 150 MB/s, RAID 0, 1 supported (for two HDD) CE approval FCC Class A On-board RTC On-chip real time clock with battery back up Ordering Information Disk On Module NEX 732L2G (LF) (P/N: 10G0732L200X0) ® ® On-board reserved power pin for DOM (Disk On Module) Intel mPGA478 ZIF Socket Pentium 4 CPU up to 3.6 GHz Supports ATX power supply, 400/533/800 MHz FSB ISA Support DDR DIMM x 4 for Max. 4 GB Through PCI to ISA interface ® Intel 875P Chipset with 1 x AGP slot, 3 x PCI-X slots, 3 x PCI slot, No ISA Master Device support 1 x 10/100 LAN, and 1 x Gigabit LAN No ISA DMA support NEX 732L (LF) (P/N: 10G00732L00X0) ® ® Maximum of 3 ISA slots supported Intel mPGA478 ZIF Socket Pentium 4 CPU up to 3.6 GHz Supports ATX power supply, 400/533/800 MHz FSB System Monitor DDR DIMM x 4 for Max. 4 GB System monitor controller derived from Winbond W83627HF super I/O ® Intel 875P Chipset with 1 x AGP slot, 3 x PCI-X slots, 3 x PCI slot, and 7 voltage (For +3.3 V, +5 V, +12 V, Vcore, +2.5 V, +5 Vsb) 1 x 10/100 LAN 3 fan speed (For CPU x 1, system x 2) 3 temperature (For CPU x 1, system x 2) Power Requirements +3.3 V: 11 A +5 V: 17 A +12 V: 14 A for Prescott P4 or 11 A for Northwood P4 5 Vsb: 2 A Industrial ATX Motherboards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products