Elite.Parts

Description

Nexcom NEX 600 CPU Board - Intel Pentium M/ Celeron CPU with 2 x GbE LAN/ Mini-PCI

Part Number

NEX 600

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

EMBEDDED COMPUTING » MINI-ITX CPU BOARDS

Specifications

Audio

Realtek ALC655 CODEC for AC97 v2.1 CODEC, Digital 5.1 Channel output, Line in, Line out, MIC-in, Surround out, Aux in, Center out with phone jack

BIOS

Award System BIOS 4M-bit flash ROM, Supports Soft off, Wake on LAN, RTC Alarm Power On and Power on after power failure

Certifications

CE approval FCC Class A

Chipset

Intel 852GM Graphics Memory Controller Hub, Intel I/O Controller Hub

CPU

Intel Pentium M / Celeron M processor with 400MHZ FSB, Intel Embedded Processor List (Intel Longevity CPU):Celeron M Processor (320 & 370), Pentium M Processor (745), Pentium M Processor 1.6GHz 400 MHz FSB support

Dimensions

Mini-ITX, 170 mm (L) x 170mm(W) (6.7" x6.7")

Display Interface

Intel 852GM GMCH Integrated, Max 64 MB of DVMT for graphics memory allocation, Analog VGA interface:1x DB15 VGA port, Resolution up to 1600x1200 at 85 Hz, 1920 x 1400 at 60Hz, LVDS interface:2 x DF13 20-pin LVDS connector for internal connection

Ethernet

2 x Realtek RTL8110SC Gigabit Ethernet, Supports Boot from LAN (PXE) and Wake on LAN (When 5Vsb power available), 2 x RJ-45 Jack with LED

Expansions

1 x PCI slot, 1 x Mini-PCI (optional)

I/O

USB 2.0: 4 ports, Serial port: 4 ports, 2 with DB9, 2 with 2x5-pin box header (2.0mm) support RS-232 only. Parallel port:1 port, with 26-pin box header (2.0 mm) , Bi-directional, EPP/ECP GPIO: Support 8 general purpose I/O each with TTL level

Memory

2 x 184-pin DIMM, Support Non-ECC / Non-Register DDR memory up to 2 GB

Processor

Intel Celeron

RTC

On-chip RTC with battery backup, 1 x External Li-lon battery

Watchdog Timer

Watchdog Timer is programmable by software from 1 second to 255 seconds (Tolerance 15% under room temperature 25°C)

Features

4x USB, 4x COMs, and CF Socket / SATA Interface
Dual Realtek RTL8110SC Gigabit Ethernet
Intel 852GM + Intel 82801DB (ICH-4) Chipset
One PCI-slot for Expansion, Optional Extra Mini-PCI Socket Support
Supports Intel Pentium M/Celeron M Processor with 400MHz FSB
Various Display I/O via VGA / Dual pixels LVDS / DVI

Datasheet

NEX60-18968802540.pdf

935 KiB

Download

Extracted Text

® ® ® NEX 600 Intel Pentium M/ Celeron CPU with 2 x GbE LAN/ Mini-PCI 2 x SATA PCI CF GbE LAN2 (Top) GbE LAN1 (Bottom) ® IIntel ICH4 4 x USB 2.0 Digital 5.1 Channel output DDR, Max 2 GB ® Intel 852GM VGA LVDS COM4 PIO ® ® ® Intel Pentium M / Celeron M COM 2 (Top) processor with 400MHZ FSB COM 1 (Bottom) ATX Power Con. CCFL Touch panel COM3 Main Features Con. ® ® ® Supports Intel Pentium M/Celeron M Processor with 400MHz One PCI-slot for Expansion, Optional Extra Mini-PCI Socket Support FSB 4x USB, 4x COMs, and CF Socket / SATA Interface ® ® Intel 852GM + Intel 82801DB (ICH-4) Chipset Dual Realtek RTL8110SC Gigabit Ethernet Various Display I/O via VGA / Dual pixels LVDS / DVI Product Overview The Mini-ITX Main-board form factor has a compact embedded board measuring only 170 mm x 170 mm to enhance the system development for System Integrator. The NEX 600 offers an off-the-shelf chassis/enclosure solution for the industrial market. ® ® ® ® The NEX 600 provides cost-effective with versatile function and high performance by utilizing Intel 852GM Chipset, which supports Intel Pentium M / Celeron M processors. Moreover, the NEX 600 is an ideal off-the-shelf solution for entry and reliable embedded applications. Display Speciﬁ cations ® Intel 852GM GMCH Integrated, Max 64 MB of DVMT for graphics memory allocation CPU Support Analog VGA interface: ® ® ® Intel Pentium M / Celeron M processor with 400MHZ FSB 1x DB15 VGA port ® ® Intel Embedded Processor List (Intel Longevity CPU): Resolution up to 1600x1200 at 85 Hz, 1920 x 1400 at 60Hz ® Celeron M Processor (320 & 370) LVDS interface: ® Pentium M Processor (745) 2 x DF13 20-pin LVDS connector for internal connection ® Pentium M Processor 1.6GHz Single (18bit) or dual pixel (36bit) LVDS panel support up to UXGA panel 400 MHz FSB support resolution (1600x1200) CCFL interface:1x7-pin JST (2.54mm) for LCD Panel Backlight Inverter Power Main Memory DVI interface: 2 x 184-pin DIMM, Support Non-ECC / Non-Register DDR memory up to 2 GB 1 x DVI-I connector, output Digital LCD signals (DVI-D) Support up to UXGA panel resolution (1600x1200) Chipset Display Touch screen ® PenMount 6500 (USB) Intel 852GM Graphics Memory Controller Hub (GMCH) ® Intel ICH4 I/O Controller Hub With 1x9-pin JST (2.0mm) Can be selected to support 4/5/8-wired touch screen BIOS Audio Award System BIOS 4M-bit ﬂ ash ROM Realtek ALC655 CODEC for AC97 v2.1 CODEC Supports Soft off, Wake on LAN, RTC Alarm Power On and Power on after power Digital 5.1 Channel output failure Line in, Line out, MIC-in, Surround out, Aux in, Center out with phone jack On-board LAN I/O Interface ® 2 x Realtek RTL8110SC Gigabit Ethernet USB 2.0: 4 ports Supports Boot from LAN (PXE) and Wake on LAN (When 5Vsb power available) Serial port: 4 ports, 2 with DB9, 2 with 2x5-pin box header (2.0mm) support 2 x RJ-45 Jack with LED RS-232 only. Parallel port:1 port, with 26-pin box header (2.0 mm) , Bi-directional, EPP/ECP GPIO: Support 8 general purpose I/O each with TTL level (0V/5V) interface Mini-ITX CPU Boards Block Diagram Intel® Pentium® M / Celeron® M processor DVO-C DVI OUTPUT CH 7009 FSB 400MHz RGB Signal CRT OUTPUT DDR 266 MHz 2 x DDR-DIMM Intel 82852GM 18bit LVDS OUT ATA100/66/33 CF Card DMI Mini PCI SLOT 5.1 AC'97 (Optional) Channel CODEC AC'97 2.3 Intel PCI 32Bit 33MHz USB2.0 4 x USB PCI SLOT 82801DB ICH4 USB2.0 USB Touch Screen SATA RAID 0/1 LPC LAN1 LAN2 RTL8110SC VT6421 RTL8110SC IT8712 SIO IT8712 SIO FWH RJ45 CON RJ45 CON 2 x SATA CON COM1/COM2 COM3/COM4 PIO FAN : 3 x fan JST (1x for CPU cooler, 2 x for System) Power Input 1 x 5-pin header for IrDA Tx / Rx Supports 20 pin ATX power input connector 1 x on-board buzzer CPU: Pentium M 1.7GHz / 400Mhz FSB 1 x 2-pin power on switch +12 V +5 V 3.3V 1 x 2-pin header for reset Memory: 2 x DDR 333 1GB 1 x 2-pin header for power LED Full-Loading Mode 0.15 A 5.17 A 0.35 A 1 x 2-pin header for HDD LED Storage Light-Loading Mode 0.15 A 2.89 A 0.36 A CF : 1 x Internal CompactFlash socket Support One Type I& II Compact Flash Card (Primary Master) NOTE: SATA: 2 ports, support RAID 0,1 1. 5VSB is depending on stand by power inquire. 2. Full Loading: Utilize CPU 100% with Burn-in test running Expansion 3. Light Loading: Utilize CPU loading below 5% without data or application 1 x PCI slot running. 1 x Mini-PCI (optional) Environment Watchdog Timer Board level operating temperature: 0°C to 60°C Watchdog Timer is programmable by software from 1 second to 255 seconds Storage temperature: -20°C to 85°C (Tolerance 15% under room temperature 25°C) Relative humidity: Operating 10%~90%, non-condensing On-board RTC Non-operating 5%~95%, non-condensing On-chip RTC with battery backup 1 x External Li-lon battery Certifications CE approval System Monitor FCC Class A 4 voltages: +3.3V, +5V, +12V, Vcore 3 temperature: CPU, two external Temperature Sensors 3 fans Speed: CPU and System FANs Ordering Information NEX 600-SKT (P/N: 10G00060001X0) RoHS Compliant Dimensions ® Mini-ITX Embedded Board with Intel 852GM Chipset, support µFC-PGA Socket Mini-ITX ® ® type Pentium M / Celeron M Processor, 2 x Realtek GbE / CF socket/ DVI 170 mm (L) x 170mm(W) (6.7" x6.7") Mini-ITX CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products