® ® 3.5” Pentium M/ Celeron M Embedded CPU EBC 301 (w/ EBK 301-C1 & C2) board with Gigabit LAN Main Features Œ 3.5� ECX Form Factor Œ Single +5V AT Mode Power Input Design ® ® Œ Intel Pentium M/ Celeron M Procesors Œ Supports LVDS/ CRT Dual Independent Display ® Œ Intel 915GME or 910GMLE Chipset Œ Realtek 8111C-GR PCI Express GbE Controller Œ On-board Default 512 MB DDR2 Memory Œ Supports Both ATX or AT Power Mode Œ Max. Support up to 1GB by Manufacture Option Œ ECX Multi I/O Expansion for Add-on Modules Product Overview ® ® ® ® The EBC 301 is a 3.5” ECX embedded board with Intel Celeron M / Pentium M processor support. The EBC 301 features Intel 915GME or 910GMLE and ICH6M chipsets, which supports DDR2 memory, along with integrated graphics with DVMT memory to support CRT and LVDS function and dual independent display capability. The South Bridge ICH6M provides, serial port, four USB 2.0 ports, and one Gigabit Ethernet LAN port With the ECX multi I/O connector for the extra interface, such as ,4 x USB, 1 x LPC, 2 x PCI Master, AC97 Audio Codec, 1 x PCI Express, and SDVO, which will provide dedicated application required features under such small form factor. The EBC 301 is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support. Display Specifi cations ® ® Œ Intel 915GME (910GMLE) integrated graphics solution w/ Intel Extreme Graphics 2 technology CPU Support Œ Intel DVMT video memory allocation ® ® ® ® Œ Support Intel Pentium M processor or Intel Celeron M processor in PGA Œ 350-MHz integrated 24-bit RAMDAC that can drive a standard progressive and BGA Type scan analog monitor with pixel resolution up to 1600x1200 at 85 Hz, 2048x1536@75Hz Main Memory Œ LVDS: Single pixel LVDS panel support up to UXGA panel resolution (1600 x Œ On-board default 512 MB DDR2 Memory 1200) Œ Max. Support up to 1GB by Manufacture Option Œ DF13-20DP, 2 x 20-pin connector for LVDS panel output Œ One CCFL 7-pin 2.5mm Jst connector for LCD Backlight Inverter Power Control. Chipset ® Œ Intel 915GME chipset (compatible with 910GMLE chipset) I/O Interface ® Œ Intel ICH6M (82801FBM) Œ Serial port: 2 ports, 1 x DB-9 Connector and one 2x5 2.0mm Box Header Œ USB 2.0: 4 ports, 2 ports edge connector, 2 ports by 6-pin 2.0mm Jst connector. BIOS Œ 8 GPIO:10-pin(2x5) 2.0mm header (GPI 0 ~ 3 and GPO0 ~ 3), TTL Level (0/5 V) Œ Award System BIOS Œ One 1x2 2.54mm thermal sensor pin Œ Advanced Power Management support Œ 3-pin Fan connector, adjustable by jumper for +12V or +5V(Manufacture Default) Œ 4M bits fl ash ROM Œ 2-pin header (2.54 mm) for Buzzer. Reset switch, Power LED, HDD LED and ATX Œ Only support Software Shutdown by 5Vsb Provided (S0 /S5 only) mode power-on Push Button Œ 2X5 10-pin Power Input connector. On-board LAN Œ One DB15 VGA connector Œ Realtek 8111C-GR PCI Express GbE controller Œ One RJ45 LAN connector Œ 1 x RJ45 with LED connecter Œ One ECX Multi I/O connector for the expansion modules through following Œ Support PXE LAN boot ROM for Ethernet Boot up. reserved interface: Œ Support Wake on LAN (By 5Vsb Provided) USB x4 / LPC x1 / PCI (Master) x2 / AC97 Audio Codec Interfacex1 / PCI Express x1 / SDVO 3.5” CPU Boards Block Diagram Intel® Pentium® M Intel® Celeron® M Processor FSB 400/533MHz CRT OUTPUT DDR2 400/533 MHz DDR2 (DB15) Intel 915GME LVDS OUT SDVO 4 Lanes 2GB/S 4 x USB2.0 Multi 2 x USB (Edge Conn.) USB2.0 I/O PCI express x 1 port (1) 2 x USB (Internal) 2 PCI BUS masters supported Intel PCI 32 bit /33 MHz Bus SATA 1 x SATA AC＇ 97 ICH6-M LPC BUS LPC LAN1 PCI express x 1 port (0) RJ45 CON RTL8111C-GR COM1 & 2 IT8712F SIO GPIO On Board RTC Environement Œ On chip RTC with battery back up Œ Operating Temp: -20˚C to 60˚C for Board Level Only Œ External Li-Lon Battery Œ Storage Temp.: -20˚C to 85˚C Œ Relative Humidity : Storage Operating 10%~90%, non-condensing Œ 1 X SATA Connector Non-operating 5%~95%, non-condensing Œ CF socket support through optional module EBK 301-C2 System Monitor Ordering Information Œ 3 voltage: +3.3V, +5V, Vcore Œ EBC 301-SKT-512M (P/N: 10E00030100X0) RoHS Compliant Œ 2 Temperatures: CPU, System ® ® 3.5” ECX Embedded Board with Pentium M/ Celeron M CPU Socket Œ 1 FANs speed: CPU FANs Based on Intel 915GME Chipset supports 400/533 MHZ FSB CPU, with 512MB DDR2 Memory on Board Watchdog Timer With VGA/ LVDS/ COMs/ USB2.0 / SATA / Gigabit LAN Œ Watchdog timert is programmable by Software from 1 mins to 255 mins or Œ EBK 301-C1 (PN:10E0301C100X0) 1 sec. to 255 sec. , (Tolerance 15% under room temp. 25°C) Two USB (Via two 6 pin JST) / LPC Super I/O, for COM3 and COM4 (COM4 support RS232/422/485) Power Input One Audio Phone Jack for Audio Speaker Out / One Internal Audio Line in and Œ AT Mode: Single 5V input Mic in connector One DVI connector CPU: P-M 2.0G Memory: On board DDR2 1GB +5 V Œ EBK 301-C2 (PN:10E0301C200X0) Full-Loading Mode 4A Two USB (Via one 6 pin JST) Light loading Mode 3A Two LPC Super I/O for COM3,COM4 and COM5,COM6 (COM3 & 4 support RS232/422/485) Œ ATX Mode One CF socket Aux input connector for +5Vsb, +12V, -12V, -5V as ATX mode application. Support Remote Power ON / Software Shutdown / RTC alarm When ATX mode Dimensions Œ 3.5” form factor / 146 mm (L) x 105 mm (W) (5.7” x 4.1”) Certifications Œ CE approval / FCC Class A 3.5” CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008