Elite.Parts

Description

NEXCOM 10E00034200X0) Embedded CPU Board - 3.5" ECX On-board Intel Atom N270 1.66GHz CPU with 24-bit LVDS/Gigabit LAN/CF

Part Number

10E00034200X0

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

PRODUCTS - 1

Specifications

Advanced Power Management

Advanced Configuration & Power Interface, 8M bits SPI ROM

Analog VGA interface

1 x DB15 VGA port Resolution up to 1600 x 1200 at 85 Hz, 2048x1536 at 75Hz

Audio

Realtek ALC888 CODEC for High Definition, 1 x Mic-in and 1 x Line-out Pin header

BIOS

Award system BIOS, Plug & Play support

CCFL interface

1 x CCFL for LCD Panel Backlight Inverter

Certifications

CE approval, FCC Class A

Chipset

Intel 82945GSE Graphic Controller Hub (GMCH), Intel 82801 GBM ICH7 Mobile (ICH7-M)

CPU Support

Support Intel Atom N270 1.6GHz processor with 533MHz FSB

Dimensions

3.5" ECX form factor, 146mm (L) x 105mm (W) (5.7"x4.1")

Display

Intel 945GSE integrated 3D graphics engine, based on IntelGMA950 architecture, delivers sophisticated graphics for large display application, dual independent display support, at graphics core speeds up to 166MHz, provides a wealth of options for high-resolution displays

Expansion

1 x Mini-PCIe

I/O Interface

Serial port: 3 port, One DB9 Connector and Two 2 x 5 2.0mm box header serial, Parallel port: 1 x 26-pin box header

LVDS interface

SDVO w/ CH7308B single/dual LVDS transmitter to single (24bit) or dual pixel (48bit) LVDS panel, resolution up to 1600 x 1200, 2 x DF13 20-pin LVDS connector for internal connection

Main Memory

1 x 200-pin SO-DIMM socket, up to 2GB non-ECC 400/ 533 DDR2 memory

On-board LAN

2 x Realtek RTL8111C-GR PCI Express Gigabit Ethernet, Support Boot From LAN (PXE), 2 x RJ45 with LED

On-board RTC

On-chip RTC with battery backup, 1 x External Li-Ion battery

Operating temperatures

0°C to 60°C

Power Input

Support AT and ATX mode Power Requirements

Power requirement

+12V DC Input, One 4-pin power connector

Processor

Intel Atom

Relative humidity

Operating 10% to 90%, non-condensing

Storage

1 x SATA port, 1 x CF socket

Storage temperature

-20°C to 85°C

System Monitor

Monitoring of 4 voltages and 2 temperatures, 4 Voltage (Vcore, +12V , +3.3V , +1.5V), 2 Temperatures (CPU, System)

USB

2.0: 6 ports, 2 ports edge connector, 2 ports by 2.0mm JST connector, 2 ports by 2.0mm pin headerm 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V)m On-board Power LED and HDD Active LED Pin Headerm 1 x 3-pin fan connector (for CPU)m 1 x DB15 VGA connectorm 1 x Keyboard/Mouse pin headerm On board Buzzer/SMBus2.0/Reset SW

Watchdog Timer

Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)

Features

1 CF, 1 Mini-PCIe Card
1 SATA, 3 COM, 6 USB, 16-bit GPIO
24-bit LVDs Dual View, 2-CH LVDS
5.1-CH Audio
Dual Gigabit Ethernet
Intel 945GSE/ICH7-M Chipset
Onboard Intel Atom N270 1.6 GHz CPU
One 200-pin SODIMM socket supports up to 2 GB DDR2 400/533 MHz SDRAM

Datasheet

Nexcom-EBC342-Datashee-796595010t.pdf

195 KiB

Download

Extracted Text

® 3.5” ECX On-board Intel Atom™ N270 1.66GHz CPU with 24-bit LVDS/Gigabit LAN/CF EBC 342 VGA COM 1 USB 2.0 LAN1 LAN2 LAN LED LVDS CCFL GPIO USB Power ® Intel Atom™ N270 ® FAN Intel ICH7-M Mini-PCIe (Rear) ® Intel 945GSE K/B COM 2/3 SATA SATA Main Features Mouse Power ® 24-bit LVDs Dual View, 2-CH LVDS Onboard Intel Atom™ N270 1.6 GHz CPU ® 5.1-CH Audio Intel 945GSE/ICH7-M Chipset 1 CF, 1 Mini-PCIe Card One 200-pin SODIMM socket supports up to 1 SATA, 3 COM, 6 USB, 16-bit GPIO 2 GB DDR2 400/533 MHz SDRAM Dual Gigabit Ethernet Product Overview ® The EBC 342 is a 3.5” ECX embedded board with an on-board Intel Atom™ N270 1.6GHz processor with 512 KB L2 cache by 533/667 MHz FSB. ® The EBC 342 features Intel 945GSE and ICH7-M chipsets, which supports DDR2 400/533 memory, along with integrated GMA950 graphics for large display application to support Multiple Display. The South Bridge ICH7-M provides a Compact Flash socket, four serial ports, six USB 2.0 ports, two Gigabit Ethernet LAN port, one Mini-PCIe interface for application. The EBC 342 is a great solution featuring a low power consumption processor and small footprint with versatile displays and numerous I/O port support at industrial applications. Specifications CPU Support Analog VGA interface: ® Support Intel Atom™ N270 1.6GHz processor with 533MHz FSB 1 x DB15 VGA port Resolution up to 1600 x 1200 at 85 Hz, 2048x1536 at 75Hz Main Memory LVDS interface: 1 x 200-pin SO-DIMM socket, up to 2GB non-ECC 400/ 533 DDR2 SDVO w/ CH7308B single/dual LVDS transmitter to single (24bit) or dual pixel (48bit) LVDS panel, resolution up to 1600 x 1200 memory 2 x DF13 20-pin LVDS connector for internal connection Chipset CCFL interface: ® Intel 82945GSE Graphic Controller Hub (GMCH) 1 x CCFL for LCD Panel Backlight Inverter ® Intel 82801 GBM ICH7 Mobile (ICH7-M) Audio BIOS Realtek ALC888 CODEC for High Definition Award system BIOS 1 x Mic-in and 1 x Line-out Pin header Plug & Play support Expansion Advanced Power Management 1 x Mini-PCIe Advanced Configuration & Power Interface I/O Interface 8M bits SPI ROM Serial port: 3 port, One DB9 Connector and Two 2 x 5 2.0mm box On-board LAN header serial 2 x Realtek RTL8111C-GR PCI Express Gigabit Ethernet Parallel port: 1 x 26-pin box header USB 2.0: 6 ports, 2 ports edge connector, 2 ports by 2.0mm JST Support Boot From LAN (PXE) connector, 2 ports by 2.0mm pin header 2 x RJ45 with LED 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V) Display On-board Power LED and HDD Active LED Pin Header ® ® 1 x 3-pin fan connector (for CPU) Intel 945GSE integrated 3D graphics engine, based on Intel GMA950 1 x DB15 VGA connector architecture, delivers sophisticated graphics for large display application, 1 x Keyboard/Mouse pin header dual independent display support, at graphics core speeds up to On board Buzzer/SMBus2.0/Reset SW 166MHz, provides a wealth of options for high-resolution displays Fanless Computer LPC Bus www.nexcom.com Block Diagram Diamondville 437-pin Micro-FCBG8 IMVP-6 1 Phase @ 22x22mm Vcore TPS516101 533MHz FSB +12VSB/+12V 32/24KB L1 Cache CK410M: CY28411 512KB L2 Cache 5VSB TPS51117 533MHz FSB 3VSB FSB TPS51117 DDR2 Channel A VCC5/VCC3/2V5 DDR2 SO-DIMM 1 Slot DDR2 533MHz CalistogaGSE 998 balls 1V8/0V9 FCBGA TPS51116 VGA 27x27mm 1V5/1V05 SDVO to LVDS TPS51124 LVDS SDVOB DMI Chrontel-CH7308 x2 DMI SPI SST25VF080B 2 Lanes 2 GB/s LAN1 RTL8111C-GR PCIe x1 0/1 ASF DMI SPI 2/3 ICH7-M LAN2 RTL8111C-GR USB 2.0 PCIe x1 4/5 (82801GBM) 7 Mini-PCIe 652 balls PCIe x1 31x31mm P 15 ~ 18 CF UltraDMA 33/66/100 SATA (4) LPC AC’97 SATA Ports x 1 HD Audio ALC888-GR SATA HD Audio GPIO COM 1/2/3 Super I/O W83627UHG KB/MS Thermal Sensor Watchdog Timer Ordering Information Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% EBC 342 (P/N: 10E00034200X0) RoHS Compliant ® under room temperature 25°C) Low power Embedded Board with Intel Atom™ N270 processor and ® based on Intel 945GSE 3D graphics engine GMA950 w/ VGA/24bit Storage LVDS/6 x USB2.0/3 x COMs/1 x Mini-PCIe/2 x Gigabit LAN/1 x parallel 1 x SATA port port 1 x CF socket System Monitor Monitoring of 4 voltages and 2 temperatures 4 Voltage (Vcore, +12V , +3.3V , +1.5V) 2 Temperatures (CPU, System) On-board RTC On-chip RTC with battery backup 1 x External Li-Ion battery Power Input Support AT and ATX mode Power Requirements Power requirement: +12V DC Input One 4-pin power connector Dimensions 3.5" ECX form factor/146mm (L) x 105mm (W) (5.7”x4.1”) Environment Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: Operating 10% to 90%, non-condensing Certifications CE approval FCC Class A 3.25 " CPU Board We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 01/05/2012 ATA 100 (1) USB 2.0 (8) SDVO B VGA LVDS TVout PLC PCI PCIe *1(6) DDR2 Ch B DDR2 Ch A

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products