N2POWER XL125-1
Features
- Active Current Sharing (single output models only)
- Built-in OR'ng diodes for Parallel/Redundant Operation
- Class B emissions
- High Density 3 x 5 x 1.25" Open-Frame Switcher
- International Safety Approvals
- Only 5 cfm airflow for full load
- Sense, IShare, Power Good, & PS OK Signals
- Universal AC Input with Active PFC
Datasheet
N2Power-XL125 Series-Power Supplies-datasheet1-1279568740.pdf
755 KiB
Extracted Text
CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT N2Power ULTRA SMALL, HIGH EFFICIENCY POWER SUPPLIES XL125 Series A Qualstar Company 125 Watt Open-Frame Power Supplies XL125 AC-DC Series Measures: 5.00 x 3.00 x 1.25” Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 • 125 W AC-DC • UP TO 92% EFFICIENCY • HIGH POWER DENSITY: 3 6.7 W/in • UNIVERSAL AC INPUT • ACTIVE PFC (90 – 264 VAC) • BUILT IN OR’ING DIODES FOR N+1 • 3” X 5” SMALL FOOTPRINT • <1U HIGH: 1.25” • NO LOAD OPERATION • RoHS COMPLIANT POWER SUPPLY DESIGN LEADER TM N2Power continues to lead the power density race with its new small, high efficiency open frame XL125 Series AC-DC power supplies. T W I C E T H E P O W E R I N H A L F T H E S P A C E Our patented technology yields a very small footprint, reduces wasted power, and offers the highest power density in the market in the 125 watt range. The unique design means Typical Mechanical Drawing: reduced energy costs, a greater return on Inches (millimeters), connectors and pinouts may vary with model. your investment, higher reliability and Refer to XL125 Product Specification for complete information. longer product life. .225 5.00 (5.7) (127.0) 4.55 .225 UNMATCHED POWER DENSITY (115.6) (5.7) With an overall height of 1.25" and a 3" x 5" footprint, the XL125 Series boasts a power density of 6.7 watts per cubic inch. It is ideally XL125 AC - DC suited for OEMs using industry standard 1U 3.00 2.55 Height = 1.25 (31.8) (76.2) (64.8) chassis. N2Power’s small form factor power supplies allow you to work with additional Safety ground connection point at plated through hole “real estate” for more functionality inside your product. Decreased space, reduced thermal loads and lower costs will increase your Lock washer Screws shown for reference only competitive edge in the market. 1.25 1.00 0.06 0.19 HIGH EFFICIENCY IN A SMALL PACKAGE (31.8) (25.4) (1.5) (4.8) Reduced heat generation and greater reliability are key design requirements. The XL125 Printed Circuit Board Series provides up to 92% efficiency in a 125 watt power supply. Our unique design PFC READY, SAVE ENERGY reduces energy consumption and generates Many countries already require Power Factor with universal input to provide superior less waste heat. It requires little forced air Corrected (PFC) power supplies, which efficiency in each supply. Comparisons of cooling, decreases AC loads and increases lessen loads at generating stations. All XL125 power loading show that our supplies can reliability and economy of operation. products incorporate active PFC technology reduce consumption up to 50%. (866) 588-1750 www.powergatellc.com specifications are subject to change without notice sales@powergatellc.com 1 1 1 CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT N2Power XL125 Series 125 Watt Open-Frame Power Supplies ULTRA SMALL, HIGH EFFICIENCY POWER SUPPLIES Measures: 5.00 x 3.00 x 1.25” Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 A Qualstar Company XL125 AC-DC Series REPEATABLE QUALITY PART REGULATION MAXIMUM RIPPLE & MODEL OUTPUT VOLTAGE We use advanced PCB technology to deliver NUMBER (%) CURRENT (A) NOISE (P-P) XL125-03 400010-03-9 V1 3.3 ±3 30.0 50 mV the highest density and best performance XL125-03 CS 400010-01-3 V2 12 ±5 1.0 120 mV in the industry. Our packaging design XL125-05 400003-08-3 V1 5 ±3 25.0 50 mV incorporates SMT technology to automate XL125-05 CS 400003-01-8 V2 12 ±5 1.0 120 mV processes, ensure reliability, and reduce cost. XL125-12 400004-67-7 V1 12 ±3 10.4 120 mV XL125-12 CS 400004-61-0 V2 12 ±5 1.0 120 mV Each power supply undergoes a complete XL125-15 400005-62-5 V1 15 ±3 8.3 150 mV functional test and a multi-hour burn-in to XL125-15 CS 400005-61-7 V2 12 ±5 1.0 120 mV insure that every unit meets our stringent XL125-24 400006-65-6 V1 24 ±3 5.2 240 mV quality requirements. Detailed statistical XL125-24 CS 400006-61-5 V2 12 ±5 1.0 120 mV XL125-28 400006-66-9 V1 28 ±3 4.5 280 mV production records are maintained and rigid XL125-28 CS 400006-64-9 V2 12 ±5 1.0 120 mV quality and AVL control insures the highest XL125-48 400007-63-9 V1 48 ±3 2.6 480 mV quality product available. Each power supply XL125-48 CS 400007-61-3 V2 12 ±5 1.0 120 mV design is also rigorously tested by UL, V1 3.3 ±2 10.0 50 mV V2 5 ±4 15.0 50 mV with scheduled factory audits to ensure XL125-1 400002-61-4 V3 12 ±5 5.0 120 mV ongoing compliance. V4 –12 ±5 1.0 120 mV V1 2.5 ±2 13.2 50 mV Contact us regarding custom and modified V2 5 ±4 15.0 50 mV XL125-7 400008-01-7 standard supplies for unique applications. V3 12 ±5 5.0 120 mV V4 –12 ±5 1.0 120 mV V1 5 ±4 16.5 50 mV XL125-8 400009-61-9 V2 12 ±5 5.0 120 mV V3 –12 ±5 1.0 120 mV CS = Current Sharing INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS OPERATING SPECIFICATIONS Nominal Input Voltage: 100 – 240 VAC Total Power: 125 W Operating Temperature: –25 to +50 C ˚ Maximum AC Input: 90 – 264 VAC Hold-up Time: Minimum 28 mS Temperature Derating: 2.5% / degree C to 70 C ˚ at all input voltages Input Frequency Range: 47 – 63 Hz Storage Temperature: –40 to +85 C ˚ † Efficiency: Up to 92% Input Current: 1.8 A @ 100 VAC Forced Air Cooling: 5 CFM † Minimum Load: No load Input Protection: 3.15 A fuse Convection Cooling: See Product Over / Under Shoot: Maximum 10% at turn-on Specification Safety Isolation: 3000 VAC input to output 1500 VAC input to ground MTBF: >200,000 hours calculated PROTECTION Inrush Current: 33 A @ 115 VAC SIGNALS †∆ Leakage Current: <.75 mA Overvoltage Protection: On all main outputs Remote Sense: On main output Power Factor Active PFC circuitry, meets Overpower Protection: Protected / Auto-recovery Current Sharing: Active current sharing Correction: or exceeds EN61000-3-2 with OR’ing diode Short Circuit Protection: All outputs protected †∆ or MOSFETs against short circuit † Power Good: Provided Thermal Shutdown: Protected against † overtemperature conditions PS_OK: Output † LED: Some models † See Product Specification ∆ Some Models IEC 60950-1:2005 (2nd Edition) Safety of Information Technology Electromagnetic Field Immunity COMPLIANCE: Equipment. (CB Report) EN61000-4-4 Fast Transient / Burst Immunity USA/Canada: EN61000-4-5 Surge Immunity UL60950-1:2007 (2nd Edition) / C22.2 No. 60950-1-07 (Bi-National Directive 2004/108/EC “Electromagnetic Compatibility (EMC) Directive” EN61000-4-6 Immunity to Conducted Disturbances Standard) Safety of Information Technology Equipment EN61000-4-11 Voltage Dips, Short Interrupts & Voltage Variations EN61204-3:2001 Stabilized Power Supplies, d.c. Outputs EMC Europe: Standards Specification Directive 2002/95/EC - “Restriction of Hazardous Substances (RoHS)” Directive 2006/95/EC - “Low Voltage (Safety) Directive” EN61204-3:2001 is a product family EMC standard referencing Safety Approvals: the following standards: UL, cUL, CB Certificate, CB Report. CE Mark EN61000-3-3 Limits of Voltage Fluctuations & Flicker EN61000-3-2 Harmonic Current Emissions (Power Factor Correction) EN61000-4-3 Radiated Radio Frequency. A Qualstar Company For complete specifications on all models, please visit our website at: www.N2Power.com All information and specifications are based on our Qualstar and the Qualstar logo are registered knowledge of the products at the time of printing. trademarks of Qualstar Corporation. N2Power N2Power Fax: 805-583-7749 N2Power reserves the right to change specifications and the N2Power logo are trademarks of Qualstar A Qualstar Company without notice. Corporation. All other trademarks are the property Tel: 805-583-7744 of their respective owners. 3990-B Heritage Oak Court N2Power products are covered by patent 800-468-0680 (U.S. Toll Free) number 6,163,139. Copyright © 2010 • Qualstar Corporation. (866) 588-1750 All rights reserved. Printed in USA. Simi Valley, CA 93063 E-mail: sales@N2Power.com www.powergatellc.com NDS011 1/10 specifications are subject to change without notice sales@powergatellc.com NASDAQ: QBAK Website: www.N2Power.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the XL125-1 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods