MURATA PVC6A250A01B00

Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Trimmer Potentiometers Lead Sealed Single-turn Type PVC6/PV32/PV34 Series PVC6 Series 6.9 0.55W×3.2L×1.3Dn Features 1. Enlarged rotor provides superior adjustability. 2. 11-scales are easy to see adjustment position. 3.2 Dia. 3. Colored rotor provides superior adjustability. 4. Funnel shaped rotor allows for in-process automatic 3-0.5 Dia. adjustment and it provides superior adjustability. #3 2.5 5. Available for "Zero" plus adjustment tool using. #2 6. Available for ultrasonic cleaning after soldering. #2 #1 #3 PVC6A CLOCKWISE n Applications in mm #1 ( ) Tolerance : ±0.3 1. DY 2. CRT display 3. Professional cameras 4. CATV 5. FAX 6. Power supply 6.9 0.55W×3.2L×1.3D 7. Printers 8. Sensors 9. Industrial machines 3.2 Dia. 3-0.5 Dia. #3 2.5 #2 #2 #1 #3 PVC6D CLOCKWISE in mm #1 ( ) Tolerance : ±0.3 0.55W×3.2L×1.3D 6.9 6.9 6.5 0.55W×3.2L×1.3D 3.2 Dia. 3.2 Dia. 7 3-0.5 Dia. 3-0.5 Dia. #1 #2 #3 #3 2.5 2.5 6.0 #2 #2 #2 #1 #3 #1 #3 CLOCKWISE PVC6E CLOCKWISE PVC6M in mm in mm #1 ( ) ( ) Tolerance : ±0.3 Tolerance : ±0.3 0.55W×3.2L×1.3D 0.55W×3.2L×1.3D 6.9 6.5 6.9 6.5 3.2 Dia. 3.2 Dia. 3-0.5 Dia. 3-0.5 Dia. #1 #2 #3 #3 #2 #1 2.5 2.5 6.0 2.5 2.5 6.0 #2 #2 #1 #3 #1 #3 PVC6H CLOCKWISE PVC6G CLOCKWISE in mm in mm ( ) ( ) Tolerance : ±0.3 Tolerance : ±0.3 Continued on the following page. 39 5.5 4.6 2-5.5 4.6 0.75 2.5 0.75 2.5 2-7.5 8.0 7.5 8.0 2.5 2.5 2.5 2.5 2.5 2.5 5.5 4.6 0.75 2.5 6.9 6.9 6.9 2-7.5 8.0 7.0 5.2 7.0 5.2 7.0 5.2 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. 0.55W×3.2L×1.3D 6.9 6.5 3.2 Dia. 3-0.5 Dia. #1 #2 #3 6.0 2.5 2.5 #2 #1 #3 PVC6Q CLOCKWISE in mm ( ) Tolerance : ±0.3 Power Rating Number of Turns TCR Part Number Soldering Method Total Resistance Value (W) (Effective Rotation Angle) (ppm/°C) PVC6p100A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 10ohm –10%–100 PVC6p200A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 20ohm –10%–100 PVC6p250A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 25ohm –10%–100 PVC6p500A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 50ohm –10%–100 PVC6p101A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 100ohm –10%–100 PVC6p201A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 200ohm –10%–100 PVC6p251A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 250ohm –10%–100 PVC6p501A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 500ohm –10%–100 PVC6p102A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 1k ohm –10%–100 PVC6p202A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 2k ohm –10%–100 PVC6p252A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 2.5k ohm –10%–100 PVC6p502A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 5k ohm –10%–100 PVC6p103A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 10k ohm –10%–100 PVC6p203A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 20k ohm –10%–100 PVC6p253A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 25k ohm –10%–100 PVC6p503A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 50k ohm –10%–100 PVC6p104A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 100k ohm –10%–100 PVC6p204A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 200k ohm –10%–100 PVC6p254A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 250k ohm –10%–100 PVC6p504A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 500k ohm –10%–100 PVC6p105A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 1M ohm –10%–100 PVC6p205A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 2M ohm –10%–100 PVC6p505A01 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 5M ohm –10%–100 PVC6p100A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 10ohm –10%–100 7 PVC6p200A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 20ohm –10%–100 PVC6p250A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 25ohm –10%–100 PVC6p500A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 50ohm –10%–100 PVC6p101A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 100ohm –10%–100 PVC6p201A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 200ohm –10%–100 PVC6p251A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 250ohm –10%–100 PVC6p501A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 500ohm –10%–100 PVC6p102A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 1k ohm –10%–100 PVC6p202A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 2k ohm –10%–100 PVC6p252A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 2.5k ohm –10%–100 PVC6p502A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 5k ohm –10%–100 PVC6p103A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 10k ohm –10%–100 PVC6p203A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 20k ohm –10%–100 PVC6p253A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 25k ohm –10%–100 PVC6p503A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 50k ohm –10%–100 PVC6p104A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 100k ohm –10%–100 PVC6p204A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 200k ohm –10%–100 PVC6p254A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 250k ohm –10%–100 PVC6p504A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 500k ohm –10%–100 PVC6p105A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 1M ohm –10%–100 Continued on the following page. 40 3-5.5 4.6 3.25 8.0 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. Power Rating Number of Turns TCR Part Number Soldering Method Total Resistance Value (W) (Effective Rotation Angle) (ppm/°C) PVC6p205A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 2M ohm –10%–100 PVC6p505A04 0.5(70°C) Flow/Soldering Iron 1(240°–5°) 5M ohm –10%–100 Operating Temperature Range: -55 to 125 °C The blank column is filled with the code of adjustment direction and lead type (A, D, E, G, H, M and Q). The order quantity should be an integral multiple of the "Minimum Quantity" . The last three digits express the individual specification codes. A01 for standard type and A04 for radial taping type (PVC6M/PVC6Q series only). n Construction Rotor Cover "O"-Ring Ceramic Wiper Substrate Case Terminal n Mounting Holes PVC6A/PVC6E PVC6D/PVC6H 2.5 2.5 (2) (3) (1) (3) (1) 2.5 2.5 (2) Tolerance:–0.1 Tolerance:–0.1 in mm in mm 7 PVC6M/PVC6Q PVC6G 2.5 2.5 (1) (2) (3) (3) (1) 2.5 2.5 (2) Tolerance:–0.1 Tolerance –0.1 in mm in mm Continued on the following page. 41 2.5 2.5 2.5 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. n Characteristics ΔTR–2% Temperature Cycle ΔV.S.S.–1% ΔTR–2% Humidity ΔV.S.S.–1% IR 100Mohm min. ΔTR–1% Vibration (20G) ΔV.S.S.–1% ΔTR–1% Shock (100G) ΔV.S.S.–1% ΔTR–2% Temperature Load Life ΔV.S.S.–2% ΔTR–2% Low Tamperature Exposure ΔV.S.S.–1% ΔTR–2% High Tamperature Exposure ΔV.S.S.–1% Rotational Life (200 cycles) ΔTR–4% ΔTR : Total Resistance Change ΔV.S.S. : Voltage Setting Stability IR : Insulation Resistance 7 42 2.5 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. PV32 Series 0.6 1.0 Depth n Features 1. 6 standard terminal styles. 6.6±0.5 Dia. 2. Compatible with ultrasonic cleaning 3. Single-turn cermet : 6.6mm round 4. 6mm miniature size. 0.85 Dia. max. 5. Flammability : UL94V-0 3−0.5±0.1 Dia. #1#2 #3 #2 90°±6° n Applications #1 #3 CLOCKWISE 1. TVs 2. HDTVs PV32H 3. Professional cameras 4. CATV in mm ( ) Tolerance : ±0.3 5. Facsimile machines 6. Printers 7. CPUs 8. Sensors 0.6 9. Switching power supplies 1.0 Depth 6.6±0.5 Dia. 3−0.5±0.1 Dia. #1 #2 #3 #2 #1 #3 CLOCKWISE PV32R 2.5 in mm 2.5 ( ) Tolerance : ±0.3 0.6 6.4±0.4 1.0 Depth 6.9 5.9±0.4 0.6 1.0 Depth 6.6±0.5 DIA. 3−0.5±0.1 Dia. #3 #2 #1 3−0.5±0.1 DIA. 5.0 #1 #2 #3 #2 #1 #3 #2 CLOCKWISE #1 #3 CLOCKWISE PV32P PV32N 2.5 2.5 2.5 in mm in mm 2.5 ( ) ( ) Tolerance : ±0.3 Tolerance : ±0.3 7 6.4±0.4 6.4±0.4 6.9 6.9 5.9±0.4 0.6 5.9±0.4 0.6 1.0 Depth 1.0 Depth 3−0.5±0.1 Dia. 3−0.5±0.1 Dia. #1 #2 #3 #1 #2 #3 5.0 5.0 #2 #2 #1 #3 #1 #3 CLOCKWISE CLOCKWISE PV32S 2.5 PV32T 2.5 2.5 2.5 in mm in mm ( ) ( ) Tolerance : ±0.3 Tolerance : ±0.3 Power Rating Number of Turns TCR Part Number Soldering Method Total Resistance Value (W) (Effective Rotation Angle) (ppm/°C) PV32p100A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 10ohm –20%–100 PV32p200A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 20ohm –20%–100 PV32p250A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 25ohm –20%–100 Continued on the following page. 43 2.5 2.5 2.8 Dia. 1.0 0.2±0.1 0.2 6.5±1.0 4.7±0.3 7.0±1.0 5.5±0.3 2.5 8.0±1.0 8.0±0.3 2.8 DIA 6.0±0.3 2.5 2.5 2.8 Dia. 1.0 0.2±0.1 2.8 Dia. 1.0 0.2±0.1 0.2 CL 5.5±1.0 4.7±0.3 5.0±1.0 4.7±0.3 7.0±1.0 5.5±0.3 8.0±0.3 6.0±1.0 8.0±0.3 8.0±1.0 2.8 Dia. 6.0±0.3 0.4 0.35 max. 4.1±0.3 2.8 Dia. 8.0±1.0 4.6±0.3 2.5 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. Power Rating Number of Turns TCR Part Number Soldering Method Total Resistance Value (W) (Effective Rotation Angle) (ppm/°C) PV32p500A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 50ohm –20%–100 PV32p101A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 100ohm –20%–100 PV32p201A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 200ohm –20%–100 PV32p251A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 250ohm –20%–100 PV32p501A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 500ohm –20%–100 PV32p102A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 1k ohm –20%–100 PV32p202A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 2k ohm –20%–100 PV32p252A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 2.5k ohm –20%–100 PV32p502A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 5k ohm –20%–100 PV32p103A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 10k ohm –20%–100 PV32p203A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 20k ohm –20%–100 PV32p253A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 25k ohm –20%–100 PV32p503A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 50k ohm –20%–100 PV32p104A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 100k ohm –20%–100 PV32p204A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 200k ohm –20%–100 PV32p254A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 250k ohm –20%–100 PV32p504A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 500k ohm –20%–100 PV32p105A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 1M ohm –20%–100 PV32p205A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 2M ohm –20%–100 PV32p505A01 0.5(70°C) Flow/Soldering Iron 1(230°–5°) 5M ohm –20%–100 Operating Temperature Range: -55 to 125 °C The blank column is filled with the code of adjustment direction and lead type (H, P, R, N, S and T). The order quantity should be an integral multiple of the "Minimum Quantity" . n Construction Rotor Cover "O"-Ring Wiper Resistive Element Ceramic Substrate Terminal 7 n Mounting Holes PV32H PV32R (1) (2) (3) (2) 2.5 2.5 (1) (3) Tolerance:–0.1 Tolerance:–0.1 in mm in mm Continued on the following page. 44 2.5 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. n Mounting Holes PV32P/PV32S PV32N 2.5 2.5 (2) (3) (1) (3) (1) 2.5 2.5 (2) Tolerance –0.1 Tolerance:–0.1 in mm in mm PV32T 2.5 2.5 (1) (3) (2) Tolerance:–0.1 in mm n Characteristics ΔTR–2% Temperature Cycle ΔV.S.S.–1% ΔTR–2% Humidity IR 100Mohm min. ΔTR–1% Vibration (20G) ΔV.S.S.–1% ΔTR–1% Shock (100G) ΔV.S.S.–1% 7 ΔTR–2% Temperature Load Life ΔV.S.S.–2% ΔTR–2% Low Tamperature Exposure ΔV.S.S.–1% ΔTR–2% High Tamperature Exposure ΔV.S.S.–1% Rotational Life (200 cycles) ΔTR–4% ΔTR : Total Resistance Change ΔV.S.S. : Voltage Setting Stability IR : Insulation Resistance 45 2.5 2.5 2.5 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. PV34 Series 9.6 5.5±0.5 4.9 0.3n Features 1. Single-turn, cermet construction in 9.6mm square. 2. Flammability : UL94V-0 3. Compatible with ultrasonic cleaning. 2.5 2.5 #1n Applications #3 1. TVs 2. HDTVs #2 3. Professional cameras 4. CATV #1 #3 5. Facsimile machines 6. Printers CLOCKWISE #2 PV34F in mm 7. CPUs 8. Sensors ( ) Tolerance : ±0.3 9. Switching power supplies 9.6 9.6 4.9 5.5±0.5 4.9 0.3 3−0.5±0.1 DIA. 2.5 2.5 #1 #2 #3 #2 #2 #3 #1 #1 #3 #1 #3 CLOCKWISE CLOCKWISE PV34H PV34P 2.5 2.5 in mm in mm ( Tolerance ±0.3 ( ) #2 Tolerance : ±0.3 9.6 9.6 4.9 4.9 3−0.5±0.1 Dia. 3−0.5±0.1 Dia. #1 #2 #3 #3 #2 #1 #2 #2 #1 #3 #1 #3 CLOCKWISE CLOCKWISE PV34W 2.5 2.5 PV34X 2.5 2.5 in mm in mm ( ) Tolerance : ±0.3 ( ) Tolerance : ±0.3 7 Power Rating Number of Turns TCR Part Number Soldering Method Total Resistance Value (W) (Effective Rotation Angle) (ppm/°C) PV34p100A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 10ohm –10%–100 PV34p200A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 20ohm –10%–100 PV34p500A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 50ohm –10%–100 PV34p101A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 100ohm –10%–100 PV34p201A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 200ohm –10%–100 PV34p501A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 500ohm –10%–100 PV34p102A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 1k ohm –10%–100 PV34p202A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 2k ohm –10%–100 PV34p502A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 5k ohm –10%–100 PV34p103A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 10k ohm –10%–100 PV34p203A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 20k ohm –10%–100 PV34p253A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 25k ohm –10%–100 PV34p503A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 50k ohm –10%–100 PV34p104A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 100k ohm –10%–100 PV34p204A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 200k ohm –10%–100 PV34p254A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 250k ohm –10%–100 Continued on the following page. 46 3.8 Dia. 3.8 DIA. 0.8 0.8 0.4 1.0 Depth 0.4 1.0 Depth 2.4±0.4 1.4±0.4 5.5±0.5 5.3 5.5±0.5 5.3 2.5 9.6 9.6 3.8 Dia. 3.8 Dia. 3.8 Dia. 0.8 0.8 0.8 1.0 Depth 1.0 Depth 0.4 1.0 Depth 5.3 1.4±0.4 5.3 2.5 4.8±0.4 5.5±0.5 5.3 2.2±0.4 5.1 9.6 2.5 9.6 9.6 3−0.5±0.1 Dia. 3−0.5±0.1 Dia. ( Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. Power Rating Number of Turns TCR Part Number Soldering Method Total Resistance Value (W) (Effective Rotation Angle) (ppm/°C) PV34p504A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 500k ohm –10%–100 PV34p105A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 1M ohm –10%–100 PV34p205A01 0.5(70°C) Flow/Soldering Iron 1(280°–15°) 2M ohm –10%–100 Operating Temperature Range: -55 to 125 °C The blank column is filled with the code of adjustment direction and lead type (F, H, P, X and W). The order quantity should be an integral multiple of the "Minimum Quantity" . n Construction Case Rotor "O"-Ring Alumina Substrate Wiper Terminal Cermet Resistive Element n Mounting Holes PV34F PV34H/PV34P 2.5 2.5 2.5 2.5 (1) (3) (1) (3) (2) (2) Tolerance:–0.1 Tolerance:–0.1 in mm in mm 7 PV34W PV34X 2.5 2.5 (1) (2) (3) (3) (1) 2.5 2.5 (2) Tolerance:–0.1 Tolerance –0.1 in mm in mm Continued on the following page. 47 5.1 2.5 2.5 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. Continued from the preceding page. n Characteristics ΔTR–2% Temperature Cycle ΔV.S.S.–1% ΔTR–2% Humidity IR 100Mohm min. ΔTR–1% Vibration (20G) ΔV.S.S.–1% ΔTR–1% Shock (100G) ΔV.S.S.–1% ΔTR–2% Temperature Load Life ΔV.S.S.–2% ΔTR–1% Low Tamperature Exposure ΔV.S.S.–1% ΔTR–2% High Tamperature Exposure ΔV.S.S.–1% Rotational Life (200 cycles) ΔTR–3% ΔTR : Total Resistance Change ΔV.S.S. : Voltage Setting Stability IR : Insulation Resistance 7 48 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. PVC6/PV32/PV34 Series Notice n Notice (Operating and Storage Conditions) 1. Store that the temperature is -10 to +40deg. C and using. the relative humidity is 30-85%RH. (1) Corrosive gaseous atmosphere. 2. Do not store in or near corrosive gases. (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia 3. Use within six months after delivery. gas, Sulfuric acid gas, Nitric oxie gas, etc.) 4. Open the package just before using. (2) In liquid. 5. Do not store under direct sunlight. (Ex. Oil, Medical liquid, Organic solvent, etc.) 6. The trimmer potentiometer should not be used under (3) Dusty/dirty atmosphere. the following environmental conditions: (4) Direct sunlight. If you use the trimmer potentiometer in an (5) Static voltage nor electric/magnetic fields. environment other these listed below, please (6) Direct sea breeze. consult with Murata factory representative prior to (7) Other variations of the above. n Notice (Rating) 1. When using with partial load (rheostat), minimize the power depend on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P•R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. n Notice (Soldering and Mounting) 1. Soldering trimmer potentimeter may be damaged by (1) Standard soldering condition mechanical stress. (a) Flow soldering : (2) Do not apply excessive force (preferable 9.8N >Pre-haeting temp. 80-100deg. C (Ref.; 1kgf) max.), when the trimmer >Soldering temp. 260deg. C max. potentiometer is mounted to the PCB. >Soldering time 3sec. max. 3. Cleaning (b) Soldering iron : (1) Isopropyl-alcohol and Ethyl-alcohol are >Temperature of tip 300deg. C max. applicable solvent for cleaning. If you use any >Soldering time 3sec. max. other types of solvents, please consult with >Wattage of iron 40W max. Murata factory representative prior to using. 7 Before using other soldering conditions than (2) The total cleaning time by cold dipping, vaper those listed above, please consult with Murata and ultrasonic washing (conditions as below) factory representative prior to using. If the method shall be less than 3 minutes. soldering conditions are not suitable, e. g., (3) For ultra-sonic cleaning, the available excessive time and/or excessive temperature, condition is as follows. the trimmer potentiometer may deviate from the >Power : 600W (67liter) max. specified characteristics. >Frequency : 28kHz (2) To minimize mechanical stress when adjusting, >Temperature : Ambient temperature the trimmer potentiometer shall be mounted onto Due to the ultra-sonic cleaning equipment PCB without gap. peculiar self resonance point and the cleaning (3) The soldering iron should not come in contact compatibility usually depends on the jig with the case of the trimmer potentiometer. If construction and/or the cleaning condition such such contact does occur, the trimmer as the depth of immersion, please check the potentiometer may be damaged. cleaning equipment to determine the suitable 2. Mounting conditions. (1) Use PCB hole to meet the pin of the trimmer If the trimmer potentiometer is cleaned by potentiometer. If the trimmer potentiometer other conditions, the trimmer potentiometer may instools into insufficient PCB hole, the be damaged. 49 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. PVC6/PV32/PV34 Series Notice n Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in We can supply above screwdrivers. driver slot. We recommend the below screwdrivers. If you place order, please nominate Murata P/N. * Recommended screwdriver for manual adjustment 2. Don't apply more than 9.8N (Ref.; 1kgf) of twist and stress after mounted onto PCB to prevent VESSEL MFG. : NO. 9000+0x30 contact intermittence. If excessive force is (Murata P/N : KMDR150) applied, the trimmer potentiometer may not TORAY INDUSTRIES, INC. : SA-2225 function. (Murata P/N : KMDR070) 3. When adjusting with an adjustment tool, the applied force to the adjustment screw should not exceed VESSEL MFG. : NO. 9000-1.8x30 4.9N (Ref.; 500gf). If excessive force is applied, (Murata P/N : KMDR110) the trimmer potentiometer may not function due to * Recommended screwdriver bit for automatic damage. adjustment 4. The rotational torque at the position of the adjustment range should not exceed the stop VESSEL MFG. : NO. CA-10 strength. (Murata P/N : KMBT090) 5. When using a lock paint to fix slot position, TORAY INDUSTRIES, INC. : JB-2225 please use adhesive resin without chlorine or (Murata P/N : KMBT070) sulfur (Three-bond "1401series"). n Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata connot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 7 50 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. S SM pe D c iS fie ca alte io dn T sy a pn ed /L T ea ed st S M ee atlh ed o d Ts ype Specifications and Test Methods The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts). No. Item Test Methods Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned against a stop. The positioning of the contact arm and terminal shall be the same for subsequent total resistance measurements on the same device. Use the test voltage specified in Table-1 for total resistance measurements. This voltage shall be used for all subsequent total resistance measurements. Total resistance, Maximum Test Nominal (ohm) Voltage (V) 1 Total Resistance 10VRV100 1.0 100FRV1k 3.0 1kFRV10k 10.0 10kFRV100k 30.0 100kFR 100.0 Table-1 Total resistance test voltage Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock- 2 Residual Resistance wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter- minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not exceeded. Contact resistance variation shall be measured with the measuring circuit shown in Figure-1, or its equivalent. The adjustment rotor (screw) shall be rotated in both directions through 90% of the actual effective-electrical rotational angle(number of turns) for a total of 6 cycles. Only the last 3 cycles shall count in determining whether or not a con- tact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the adjustment rotor (screw) shall be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum to 2 minutes maximum. The test current used shall follow the value given in Table-2 unless otherwise limited by power rating. Standard total resistance Oscilloscope Test current Rx #3 #1 R (ohm) Contact Resistance 3 RV100 20mA Variation #2 Constant Current Source not to 100FRF500 10mA Proofreaded Exceed Rating of Unit Being AC Resistance 500VRF1k 4mA Amplifier 1kVRF2k 2mA Rx : Trimmer Potentiometer 2kVRF50k 1mA Oscilloscope bandwidth :100Hz to 50kHz 50kVRF200k 200μA Figure-1 CRV measuring circuit 200kVRF1M 100μA 1MVRF2M 50μA 2MVR 30μA Table-2 Test current for CRV The trimmer potentiometer shall be subjected to the following each temperature (see Table-3) for 30-45 minutes. Temperature coefficient of resistance shall be applied to the following formula. R2 – R1 6 TCR= Z 10 (ppm/°C) R1 (T2 – T1) T1 : Reference temperature in degrees celsius T2 : Test temperature in degrees celsius Temperature Coefficient of R1 : Resistance at reference temperature ohm 4 Resistance R2 : Resistance at test temperature in ohm Sequence 1* 2 3 4* 5 6 Min. operating Max. operating Temperature(°C) +25 -15 +25 +65 temperature temperature Note) * : Reference temperature Table-3 Test temperatures The wiper shall be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An adequate DC test potential shall be applied between the terminal #1 and the terminal #3. The voltage between the terminal #1 and the terminal #3, and the voltage between the terminal #1 and the terminal #2, shall be measured and applied to the following formula. E e' e 9 Voltage Setting Voltage setting stability= – Z100 (%) ( ) 5 E E Stability #1 #3 e : Before test (The voltage between the terminal #1 and the terminal #2) #2 e': After test e (The voltage between the terminal #1 and the terminal #2) Figure-2 E: The voltage between the terminal #1 and the terminal #3 Continued on the following page. 1 72 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. SpecificatioS nM s D an S de T ae le sd t M Ty ep th eo /L de sad Sealed Type Specifications and Test Methods Continued from the preceding page. No. Item Test Methods The trimmer potentiometer shall be subjected to Table-4 temperature for 5 cycles. The trimmer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours. Sequence 1 2 3 4 +125±3 PV-- series 6 Temperature Cycle Temp. -55±3 PV22 series +25±2 +150±3 +25±2 (°C) PVF2 series -25±3 +60±3 Time (min.) 30 5 max. 30 5 max. Table-4 One cycle of temperature cycle. 1) PVC6, PV12, PV32, PV34 PVM4A---B01series The trimmer potentiometer shall be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95% with- out loading for 250±8 hours. The trimmer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours. 2) PVF2series The trimmer potentiometer shall be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12 hours. The trimmer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours 2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37series The trimmer potentiometer shall be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim- mer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/2 hours. MIL-STD-202 METHOD 106 80-98%RH 80-98%RH 70 90-98%RH 90-98%RH 90-98%RH INITIAL CONDITIONING 65 IN A DRY OVEN 60 24 HOURS 55 RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED. 50 HOWEVER, SPECIMENS SHALL NOT BE SUBJECTED TO HUMIDITY 45 RADIANT HEAT FROM CHAMBER-CONDITIONING 7 Humidity UNCONTROLLED PROCESSES 40 END OF FINAL CYCLE MEASUREMENTS AS 35 SPECIFIED IN 3.6 30 +10°C 25 -2°C 20 CIRCULATION OF CONDITIONING AIR SHALL INITIAL MEASUREMENTS BE AT A MINIMUM CUBIC RATE PER MINUTE 15 AS SPECIFIED IN 3.2 EQUIVALENT TO 5 TIMES THE VOLUME OF 10 THE CHAMBER 5 VOLTAGE APPLIED AS SPECIFIED IN 3.5 0 UNLESS OTHERWISE SPECIFIED -5 TEMPERATURE TOLERANCE IS, STEPS 7a AND 7b PERFORMED DURING ANY -10–2°C AT ALL POINTS WITHIN THE 5 OF THE FIRST 9 CYCLES. HUMIDITY CHAMBER EXCEPT THE IMMEDIATE STEP 7b UNCONTROLLED DURING STEPS 7a AND 7b VICINITY OF THE SPECIMENS AND STEP 7a ONLY THE CHAMBER SURFACES PRIOR TO FIRST CYCLE STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 UNLESS OTHERWISE SPECIFIED ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Figure-3 1) PV-- series The trimmer potentiometer shall be vibrated throughout the frequency range at the 20G level. A complete frequency range, 10Hz to 2000Hz and back, shall be made within 15 minutes for a total of 4 sweeps in each of the three axis direction for a total of 12 sweeps. 8 Vibration 2) PVF2 series The trimmer potentiometer shall be subjected to vibration at 0.3 inch amplitude. The frequency shall be varied uni- formly between the approximate limits of 10 Hz and 55Hz. This motion shall be applied for preiod of 2 hours in each of 3 mutually perpendicular direction (total of 6 hours). 1) PV-- series The trimmer potentiometer shall be shocked at the 100G (50G for PV22 and PV23series) level and shall be subject- ed to 4 shocks in each of the three axis direction for a total of 12 shocks. 9 Shock 2) PVM4A---B01series The trimmer potentiometer shall be shocked at the 100G level and shall be subjected to 3 shocks in each of the six axis direction for a total of 18 shocks. Full rated continuous working voltage not exceeding the maximum rated voltage shall be applied intermittently between the terminal #1 and the terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total 10 Temperature Road Life 9 of 1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37series, 50±2°C for PVF2series). The trim- mer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours. The trimmer potentiometer shall be placed in a camber at a temperature of 125±3°C (150±3°C for PV12series) High Temperature Exposure 11 250±8 hours without loading. The trimmer potentiometer shall be removed from the camber, and maintained at a (Except for PVF2) temperature of 25±5°C for 1 to 2 hours. The trimmer potentiometer shall be placed in a camber at a temperature of -55±3°C for 1 hours without loading. Full Low Temperature Exposure rated continuous working voltage not exceeding the maximum rated voltage shall be applied for 45 minutes. The 12 (Except for PVF2 and trimmer potentiometer shall be removed from the chamber, and maintained at a temperature of 25±5°C for approxi- PVM4A---B01) mately 24 hours. Continued on the following page. 1 73 TEMPERTURE (DEGREES CELSIUS) Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. !Note • Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note R50E12.pdf 02.9.5 This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering. S SM pe D c iS fie ca alte io dn T sy a pn ed /L T ea ed st S M ee atlh ed o d Ts ype Specifications and Test Methods Continued from the preceding page. No. Item Test Methods Low Temperature Operation The trimmer potentiometer shall be placed in a camber at a temperature of -25±3°C (-55±3°C for PVM4A--- (Only for PVF2 and 13 B01series) 48±4 hours without loading. The trimmer potentiometer shall be removed from the chamber, and main- PVM4A---B01) tained at a temperature of 25±5°C for 5±1/6 hours 1)PV-- series Full rated continuous working voltage not exceeding the maximum rated voltage shall be applied with the circuit shown in the figure. The adjustment rotor (screw) shall be continuously cycled through not less than 90% of effec- tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 a minutes maxi- mum for total of 200 cycles. Resistor 1 Resistor 2 End Terminal End Terminal End Terminal End Terminal 14 Rotational Life DC supply Figure-4 2) PVG3, PVG5series The adjustment rotor (screw) shall be continuously cycled though not less than 90% of effective- electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50 (100 for PVG5) cycles, without loading. 3) PVF2, PVM4A---B01series The wiper shall be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per minute, for 100 cycles continuously. 9 74