Elite.Parts chervon right Manufacturers chervon right M chervon right MULTICOMP chervon right Z15G1704
About product Specifications Features Datasheet FAQ

MULTICOMP Z15G1704

Image of MULTICOMP Z15G1704

Description

Multicomp Z15G1704 Switches - Microswitch, Roller Level

Part Number

Z15G1704

Price

Request Quote

Manufacturer

MULTICOMP

Lead Time

Request Quote

Category

PRODUCTS - Z

Specifications

Connection type

3 M4 x 5.5 screws/cup washers

Contact configuration

SPDT

Contact resistance

15m Ohms maximum (initial)

Dielectric strength

1000V ac, 50/60Hz for 1 minute

Electrical service life

100,000 operations minimum

Fixing Centres

25.4mm

FP maximum

32.5mm

Insulation resistance

100M Ohms minimum (at 500V dc)

Maximum Operating Force (OF)

160g

Maximum Pre Travel (PT)

2.7mm

MD maximum

0.5mm

Mechanical service life

1,000,000 operations minimum

Minimum Over Travel (OT)

2.4mm

Minimum Release Force (RF)

42g

Operating Point (OP)

30.2 ±0.4mm

Rating

15A 125V ac or 250V ac

Features

Datasheet

pdf file

Multicomp=Z15G1704=datasheet1-1870999430.pdf

133 KiB

Extracted Text

REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE -A RELEASED Z15G1704 Veena 31/5/05 Shashi 31/5/05 NK 14/6/05 Features: • • High current switching capacity. • • High mechanical strength. Characteristics Contact resistance 15mΩ maximum (initial) Insulation resistance 100MΩ minimum (at 500V dc) Dielectric strength 1000V ac, 50/60Hz for 1 minute Mechanical service life 1,000,000 operations minimum Electrical service life 100,000 operations minimum Rating 15A 125V ac or 250V ac Connection type 3 M4 x 5.5 screws/cup washers Specification Table Contact configuration SPDT Type Part Number Roller/lever Z15G1704 Specifications Maximum Operating Force (OF) 160g Minimum Release Force (RF) 42g Maximum Pre Travel (PT) 2.7mm Minimum Over Travel (OT) 2.4mm MD maximum 0.5mm Operating Point (OP) 30.2 ±0.4mm FP maximum 32.5mm Fixing Centres 25.4mm Dimensions : Millimetres This data sheet and its contents (the "Information") belong to the Premier Farnell Group TOLERANCES: DRAWN BY: DATE: DRAWING TITLE: (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence Veena 31/05/05 Z15G1704 - Basic Z series Micro-switch of any intellectual property rights is granted. The Information is subject to change with- UNLESS OTHERWISE out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or CHECKED BY: DATE: SPECIFIED, SIZE ELECTRONIC FILE REV completeness, any error in or omission from it or for any use made of it. Users of this DWG NO. data sheet should check for themselves the Information and the suitability of the prod- DIMENSIONS ARE 31/05/05 Shashi ucts for their purpose and not make any assumptions based on information included or M1000000148 30362_DWG A FOR REFERENCE omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of APPROVED BY: DATE: PURPOSES ONLY. the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SCALE: NTS U.O.M.: mm SHEET: 1 OF 2 14/06/05 NK MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004. REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE -A RELEASED Z15G1704 Veena 31/5/05 Shashi 31/5/05 NK 14/6/05 Notes: International Sales Offices: SINGAPORE – AUSTRALIA – Farnell InOne GERMANY – Farnell InOne Farnell-Newark InOne Tel No: ++ 61 2 9645 8888 Tel No: ++ 49 89 61 39 39 39 Tel No: ++ 65 6788 0200 Fax No: ++ 61 2 9644 7898 Fax No: ++ 49 89 613 59 01 Fax No: ++ 65 6788 0300 HONG KONG – AUSTRIA – Farnell InOne SPAIN – Farnell InOne Farnell-Newark InOne Tel No: ++ 43 662 2180 680 Tel No: ++ 34 93 475 8805 Tel No: ++ 852 2268 9888 Fax No: ++ 43 662 2180 670 Fax No: ++ 34 93 474 5107 Fax No: ++ 852 2268 9899 BELGIUM – Farnell InOne IRELAND – Farnell InOne SWEDEN – Farnell InOne Tel No: ++ 32 3 475 2810 Tel No: ++ 353 1 830 9277 Tel No: ++ 46 8 730 50 00 Fax No: ++ 32 3 227 3648 Fax No: ++ 353 1 830 9016 Fax No: ++ 46 8 83 52 62 BRAZIL – Farnell-Newark InOne ITALY – Farnell InOne SWITZERLAND – Farnell InOne Tel No: ++ 55 11 4066 9400 Tel No: ++ 39 02 93 995 200 Tel No: ++ 41 1 204 64 64 Fax No: ++ 41 1 204 64 54 Fax No: ++ 55 11 4066 9410 Fax No: ++ 39 02 93 995 300 MALAYSIA – UK – Farnell InOne CHINA – Farnell-Newark InOne Farnell-Newark InOne Tel No: ++86 10 6238 5152 Tel No: ++ 44 8701 200 200 Tel No: ++ 60 3 7873 8000 Fax No: ++86 10 6238 5022 Fax No: ++ 44 8701 200 201 Fax No: ++ 60 3 7873 7000 DENMARK – Farnell InOne NETHERLANDS – Farnell InOne UK – BuckHickman InOne Tel No: ++ 45 44 53 66 44 Tel No: ++ 31 30 241 7373 ++ 44 8450 510 150 Fax No: ++ 45 44 53 66 06 Fax No: ++ 31 30 241 7333 ++ 44 8450 510 130 ESTONIA – Farnell InOne NEW ZEALAND – Farnell InOne UK – CPC Tel No: ++ 358 9 560 7780 Tel No: ++ 64 9 357 0646 ++ 44 8701 202 530 Fax No: ++ 358 9 345 5411 Fax No: ++ 64 9 357 0656 ++ 44 8701 202 531 FINLAND – Farnell InOne NORWAY – Farnell InOne Tel No: ++ 358 9 560 7780 Tel No: ++ 45 44 53 66 66 Fax No: ++ 358 9 345 5411 Fax No: ++ 45 44 53 66 02 FRANCE – Farnell InOne PORTUGAL – Farnell InOne Tel No: ++ 33 474 68 99 99 Tel No: ++ 34 93 475 8804 Fax No: ++ 33 474 68 99 90 Fax No: ++ 34 93 474 5288 http://www.farnellinone.com EXPORT – Farnell InOne Tel No: ++ 44 8701 200 208 export http://www.buckhickmaninone.com Fax No: ++ 44 8701 200 209 For enquiries from all other markets http://www.cpc.co.uk This data sheet and its contents (the "Information") belong to the Premier Farnell Group TOLERANCES: DRAWN BY: DATE: DRAWING TITLE: (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence Veena 31/05/05 Z15G1704 - Basic Z series Micro-switch of any intellectual property rights is granted. The Information is subject to change with- UNLESS OTHERWISE out notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or CHECKED BY: DATE: SPECIFIED, SIZE ELECTRONIC FILE REV completeness, any error in or omission from it or for any use made of it. Users of this DWG NO. data sheet should check for themselves the Information and the suitability of the prod- DIMENSIONS ARE 31/05/05 Shashi ucts for their purpose and not make any assumptions based on information included or M1000000148 30362_DWG A FOR REFERENCE omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of APPROVED BY: DATE: PURPOSES ONLY. the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SCALE: NTS U.O.M.: mm SHEET: 2 OF 2 14/06/05 NK MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2004.

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the Z15G1704 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

MICROSWITCH, RAISED PLUNGER

MICROSWITCH, ROLLER PLUNGER

MICROSWITCH, ROLLER PLUNGER

MICROSWITCH, LONG LEVER

MICROSWITCH, ROLLER LEVER

DIGITAL SECURITY LIGHT SWITCH