Media Conversion Solutions Total Solution for Industrial Device Networking TCC-100/100I Isolated RS-232 to RS-422/485 Converter Features • RS-232 to RS-422 conversion with RTS/CTS support • RS-232 to 2/4-wire RS-485 conversion • 2 KV Isolation Protection (TCC-100I) • Wall and DIN-Rail mountable • Plug-in screw terminal block for easy RS-422/485 wiring • PWR, Tx, Rx LEDs • Surge protection, 16 KV ESD • Operating temperature from -20 to 60°C Introduction TCC-100I is an isolated RS-232 to RS-422/485 converter designed DIN-Rail mounting, terminal block wiring, external terminal block for users who need an industrial grade interface conversion product power, and optical isolation for system protection, makes TCC- to extend RS-232 transmission distance and increase networking 100I suitable for use in critical industrial environments. capability. Its superior industrial application design, which includes Auto Baud Rate Detection TCC-100/100I incorporates a method for automatically baud rate is changed, the signal will still be transmitted detecting the serial signal baud rate by hardware. This is an through the RS-232 to RS-422/485 converter without problem. extremely convenient feature for the user. Even if a device’s Isolation Protection MOXA electrical Isolation technology uses two photo couplers coupler transforms the light back into an electrical signal on the to create a gap in each electrical signal. One photo coupler other side. In this way, the two electrical circuits are completely transforms the electrical signal into a light signal, which is isolated from each other, limiting the damage that could transmitted across a small gap, and then the other photo otherwise be caused by power surges in the electrical signal. Automatic Data Direction Control (ADDC™) ADDC™ is a MOXA leading technology that uses a clever ADDC™ technology, a hardware data flow solution, to automatically sense and control data direction, making the hand hardware solution to take care of the RS-485 data direction control problem. The TCC-100/100I converter uses embedded shaking signal method unnecessary. 6-2 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com TCC-100/100I TCC-100/100I Media Conversion Solutions Total Solution for Industrial Device Networking Pin Assignment Ordering Information PIN RS-232 TCC-100: DB9 Female 1 DCD RS-232 to RS-422/485 Converter; 2 TxD 5 4 3 2 1 DIN-Rail Mounting Kit and Manual included 3 RxD TCC-100I: 4 DSR Isolated RS-232 to RS-422/485 Converter; 5 GND 6 DTR DIN-Rail Mounting Kit and Manual included 7 CTS 9 8 7 6 8 RTS 9 --- Dimensions Isolation Block Diagram Specifications Communications Humidity: 5 to 95% RH RS-232 Signals: Tx, Rx, DTR, DSR, RTS, CTS, DCD, Power Input Power Voltage: GND (DB9 Female Interface) RS-422/485: 12 to 30 VDC External Power, Terminal Block Reverse Protection: V+ and V- reverse protection Supports RS-422, 4/2-wire RS-485 Over Current Protection: (DIP Switch selectable) Protection for 2 signals shorted together Supports 4-wire RS-422, up to 10 nodes, 1.2 km Power Consumption: TCC-100: 3.4 W with RTS, CTS TCC-100I: 4.68 W Supports 4-wire RS-485, up to 32 nodes, 1.2 km Mechanical Supports 2-wire RS-485, up to 32 nodes, 1.2 km Dimensions (W x D x H): 67 x 100 x 22 mm RS-485 Data Direction Control: ADDC™ 90 x 100 x 22 mm (including DIN-Rail Mounting Kit) Baud Rate: 50 bps to 230.4 Kbps Case: Aluminum Surge Protection: 16 KV ESD for all signals Plug-in screw terminal block: #22-#16 AWG Isolation: 2 KV (TCC-100I), Power/Signal Color: Black Environment Weight: 148±5g Operating Temperature: -20 to 60°C Regulatory Approvals CE, FCC (Class B) Storage Temperature: -20 to 85°C 6-3 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com