Serial Device Server Solutions Total Solution for Industrial Device Networking 5400 Series World’s Leading LCM Display Serial Device Servers Features • Easy-to-use LCM (Liquid Crystal Module) interface for IP address configuration • Auto-detecting 10/100 Mbps Ethernet • 4 ports with RS-232 or RS-422/485 interface NPort 5410 • Surge protection for all serial signals (15 KV ESD) • Supports TCP Server, TCP Client, UDP, and Real COM Modes • Supports web, telnet console • Supports SNMP MIB-II for network management • NPort 5430I has 2 KV isolation protection NPort 5430 Make Up to 4 RS-232 or RS-422/485 Serial Devices Internet Ready The NPort 5400 Series provides a convenient and transparent transparently transmit data bi-directionally between the serial way to connect serial devices to an Ethernet, with basic and Ethernet interfaces. You can simultaneously centralize your configuration all that’s needed to network your existing serial serial device management and distribute management hosts devices. Protect your current hardware investment, but also over the network. ensure future network expandability. NPort 5400 Series can Easy-to-use Serial Device Server The built-in LCM human-machine interface displays all netmask, and gateway address. Furthermore, you can also configuration parameters, and includes 4 buttons for use the Windows utility to monitor server status and data inputting data, or for selecting the operation mode, making transmission, eliminating the need to prepare additional PCs it easy to set up server parameters, including IP address, to console the NPort 5400 for monitoring purpose. Real COM/TTY Port The NPort 5400 Series works like an add-on multiport serial Real COM ports by the Windows operating system, or Real board to the Windows host, but with one major advantage— TTY ports by Linux environments. Basic transmit/receive data the TCP/IP network. With NPort’s Real COM/TTY drivers, the functions are provided, as well as RTS, CTS, DTR, DSR, and serial ports on NPort 5400 Series products are recognized as DCD. 4 Independent Serial Ports Can be Configured for Different Operation Modes Versatile operation is ensured since different modes can be network. For example, you can configure NPort 5400’s port 1 used for different serial ports. NPort 5400 Series products are for driver mode, port 2 for TCP server mode, and ports 3 and suitable for connnecting different devices for remote data 4 for TCP client mode. polling, event handling, or data multicasting via the TCP/IP 2-26 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com 5400 Series 5400 Series Serial Device Server Solutions Total Solution for Industrial Device Networking 4-Port RS-232 and RS-422/485 Serial Device Servers Typical Applications Remote host Local host Use only one IP address to control multiple serial devices over the Internet To establish automatic or remote data acquisition, NPort 5400 Ethernet Internet series products can connect up to 4 serial devices with only 192.168.10.2 one IP address. By specifing the IP address and the TCP port number, a host computer can access different serial devices NPort 5410 over the Internet. For example, connect to 192.168.10.2: 4001 to access data from NPort 5410’s first serial port. RS-232 TCP Port 4004 4002 4003 4001 PLC Fire Alarm Temprature Entrance Control Control Control Windows Host A Windows Host B Server sharing extends flexibility by allowing serial device management from a centralized location Different host computers can share the same NPort 5400 to Ethernet control different devices. For example, NPort 5410’s ports 1 and 2 can be configured to Host A’s COM3 and COM4, and NPort 5410 NPort 5410’s ports 3 and 4 can be configured for Host B’s COM3 and COM4. RS-232 RTU RTU RTU RTU Host A’s Host A’s Host B’s Host B’s COM3 COM4 COM3 COM4 Host A Host B Centralize RS-422/485 serial device control Up to 31 RS-485 (2-wire or 4-wire) devices or up to 9 RS-422 (4-wire) devices can be connected via Ethernet with Ethernet just one of NPort 5430I’s serial ports. Use the Web console or NPort 5000 Series Windows utility to configure each serial NPort 5430/5430I 4-wire port for either RS-422 or RS-485. RS-422 2- or 4-wire RS-485 Multidrop Meters 2-27 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com Serial Device Server Solutions Total Solution for Industrial Device Networking An Amazingly Simple and Exquisite Device Server Ethernet Power input RJ45 10/100 Mbps Terminal block 12-48 VDC Reset Button LEDs LAN and Serial status LCM Display Panel Push Buttons DIN-Rail or Panel mounting Optional DIN-Rail (35 mm) Mounting Kit DB9 Male connector RS-422/485 RS-232 with 15 KV ESD protection Specifications LAN Built-in Buzzer Power Consumption: Ethernet: 10/100 Mbps, RJ45 Built-in Real Time Clock 5410: 385 mA (at 12V max.) Protection: Built-in Watch Dog Timer 5430: 380 mA (at 12V max.) Built-in 1.5 KV magnetic isolation Serial Communication 5430I: 600 mA (at 12V max.) Serial Parameters Mechanical Specifications Interface: Parity: None, Even, Odd, Space, Mark Material: SECC sheet metal (0.8 mm) NPort 5410: Data bits: 5, 6, 7, 8 Gross Weight: RS-232, DB9 Male: TxD, RxD, RTS, Stop bit: 1, 1.5, 2 5410: 0.5 kg (1.10 lb) CTS, DTR, DSR, GND, DCD Flow control: RTS/CTS, XON/XOFF 5430: 0.5 kg (1.10 lb) NPort 5430, NPort 5430I: Speed: 50 bps to 230.4 Kbps 5430I: 0.5 kg (1.10 lb) RS-422: Tx+, Tx-, Rx+, Rx-, GND Software Features Environmental RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, Operating Temperature: RS-485 (2-wire): Data+, Data-, GND Telnet, DNS, SNMP, HTTP, SMTP, SNTP 0 to 55°C (32 to 131°F), 5 to 95% RH Serial line protection: Utilities: NPort Administrator for Storage Temperature: 15 KV ESD for all signals Windows 95/98/ME/NT/2000/XP/2003 2 KV Isolation for NPort 5430I -20 to 85°C (-4 to 185°F), 5 to 95% RH Real COM/TTY Drivers: Windows 95/ Power Line protection: Agency Approvals 98/ME/2000/XP, Real COM drivers, Linux 4 KV Burst (EFT), EN61000-4-4 EMC: FCC Class A, CE Class A real TTY driver 2 KV Surge, EN61000-4-5 Safety: UL, CUL, TÜV Configuration: Web browser, telnet RS-485 data direction: console, or Windows utility Patented Automatic Data Direction TM Power Requirments Control (ADDC ) Power Input: 12 to 48 VDC Built-in HMI LCM display with four push buttons 2-28 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com 5400 Series 5400 Series Serial Device Server Solutions Total Solution for Industrial Device Networking 4-Port RS-232 or RS-422/485 Serial Device Server Easy Installation with the User-Friendly LCM Display Panel NPort 5400 Series products have 4 push buttons for inputting data and for selecting the operation mode. The LCM display panel first shows the “Server Name,” “Serial Number,” and “IP Address.” Use the LCM display panel and push buttons to configure the IP address, netmask, gateway, as well as all other parameters quickly and easily. Dimensions NPort 5410’s Pin Assignment 1 2 3 4 5 6 7 8 9 PIN RS-232 1 DCD (in) 2 RxD (in) 3 TxD (out) 4 DTR (out) 5 GND 6 DSR (in) 7 RTS (out) 8 CTS (in) 9 --- Unit: mm (inch) Ordering Information NPort 5410: 4-Port RS-232 Serial Device Server All Items include NPort 5430: 4-Port RS-422/485 Serial Device Server • 4-port serial device server NPort 5430I: NPort 5430 with 2 KV isolation • Quick Installation Guide • NPort Documentaion and Software CD-ROM • Power adaptor or DIN-Rail Power Supplies are optional accessories. Optional Accessories DK-35A: DIN-Rail Mounting Kit (35 mm) DIN-Rail Power Supply: See page 7-5 for more detailed information. Power Adaptor: See page 7-6 for more detailed information. 2-29 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com