MOTOROLA COMPUTER GROUP Board Level Products PV5300 PCI/ISA SINGLE BOARD COMPUTER artist’s depiction Advantages Motorola’s PV5300 industrial single-board computer represents the latest in high-performance embedded ® ® computing. Supporting Intel Pentium II processor Mobile Modules with speeds starting at 266 and 333 MHz, the PV5300 is a highly integrated computer hosting a robust array of I/O including USB, serials ports, parallel port, dual EIDE, Ultra ™ SCSI, CompactFlash , AGP graphics with access to flat panel signals, and dual Fast Ethernet controllers. The PV5300 is ® PICMG compliant for use in PCI/ISA passive backplanes. Quite simply, Motorola’s PV5300 is the high performance leader for embedded application developers addressing high- reliability, high-maintainability, real-time applications such as telecommunications/CTI, medical and scientific systems, industrial control and monitoring, and data acquisition. Other features include an alarm micro-controller (voltage, Features temperature, fan), the high bandwidth of the • Pentium II processor Mobile Module 132MB/second PCI local bus and serial number in • 66 MHz/100 MHz front-side bus EEPROM. • Up to 512MB SDRAM memory with ECC support • USB, serial and parallel ports Ordering Information • 16MB Flash soldered on board (configured as secondary Part Number Description master IDE) with CompactFlash connector for expandability. PV5300-266 Single-board computer with 266 MHz MMC-2, SCSI, SVGA, 10/100 Ethernet, w/o memory • Ultra SCSI and dual EIDE PV5300-333 Single-board computer with 333 MHz MMC-2, SCSI, • AGP graphics with access to flat panel signals SVGA, 10/100 Ethernet, w/o memory • Dual 10/100BaseTX Ethernet Memory Options MEMSD-xxx Synchronous DRAM DIMM (ECC compliant) PV5300 PCI/ISA Single Board Computer Note: xxx = capacity in MB The PV5300 uses the Intel Pentium II processor Mobile Other On-Board Options Module (MMC-2) to provide state-of-the-art processor, CFLASHxxx On-board EIDE compliant CompactFlash memory memory and I/O system throughput. A high-efficiency on- (where xxx = MB) board switching regulator provides 10 amps of 3.3 volt Miscellaneous power for the processor while minimizing power CPVCABLE-2 PS/2 “Y” cable for keyboard/mouse consumption and heat. Superior reliability and data integrity are achieved through high-level integration and The Motorola Commitment support for error detection and correction (ECC) using Motorola Computer Group is committed to standard 72-bit SDRAM DIMMs. providing best-in-class embedded computing The PV5300 hosts an extensive array of on-board solutions. The PV5300 reinforces this commitment by functions including USB, serial ports, parallel port, dual providing superior hardware, price performance, and EIDE, Ultra SCSI, AGP graphics with access to flat panel faithfulness to the tenets of open computing: modularity, signals, dual Fast Ethernet controllers, and optional scalability, portability, and interoperability. CompactFlash expansion. Two DIMM memory sockets The PV5300 is offered with a five-year limited warranty provide up to 512MB SDRAM with ECC support. which reduces the cost of ownership and demonstrates our The PhoenixBIOS, in bootable Flash EEPROM, supports commitment to quality and reliability of products to our up to 12 PCI and 20 ISA add-in cards and provides setup OEM partners. utilities for ISA and PCI system configurations and user- definable drive parameters. SCSI Floppy Primary IDE Connector Connector Secondary IDE LAN 1 LM 78 SMC 2 DIMM Sockets 37C672 System 512MB SDRAM Ultra I/O Monitor LAN 2 AGP Adaptec PCI BUS 0 AGP 7880 SCSI Video Controller Controller Intel 2MB 82559 PCI-PCI PCI-ISA ISA FPGA Ethernet 1 Flash BIOS Bridge Bridge Intel 82559 Ethernet 2 ISA BUS PCI BUS 1 PV5300 Block Diagram MMC2 Connector LPT 1 COM 2 COM 1 Kbd/ Video mouse BIOS Features Specifications ™ PhoenixBIOS , in Flash EEPROM PV5300 PCI/ISA Processor Module Auto configuration, extended setup, and Plug-and-Play tables Headless operation extensions Processor Programmable bus and I/O speeds, and memory wait states Single 266/333 MHz Pentium II processor Mobile Module Support for “memory hole” and C000–E000 address blocking Bus Interface System, video, and SCSI BIOS shadowing PCI/ISA or ISA, PICMG and IBM PC/AT compatible BIOS POST and Setup console redirection to serial port PCI Bus (120-pin), fully buffered (33/30 MHz) Supervisory Features ISA Bus (98-pin), fully buffered (8.33 MHz); up to 20 slots with 24 mA bus drivers Software programmable, two-level watchdog timer (17.8 ms to 291 sec.) drives Cache interrupts 5, 7, 9, 10, or 11, NMI, or system reset 512KB or 256KB (dependent on processor) Monitor micro-controller for backplane voltage, CPU temperature (user-definable threshhold alarm in IRQ 11) and fan speed with status interrogated locally through Memory I/O or remotely through a two wire serial port. Sockets: Two 3.3V DIMM sockets DRAM Option: Up to 512MB SDRAM, 64- or 72-bit, 3.3V Reliability Features Filtered serial connectors, SCSI terminator and keyboard voltage protected by self- Addressing resetting fuses. Board serial number in EPROM. Real (20-bit) and protected (16-bit on bus access) supported Mechanical Data Paths 13.32" x 4.80" (338 mm x 122 mm); conforms to IEEE P996 PC/AT bus, PCI CPU Bus: 64-bit Revision 2.1, and PICMG Revision 2.0 specifications PCI Bus: 32-bit Demonstrated MTBF ISA Bus: 16-bit (ISA bus mastering) (based on sample testing in accelerated stress environment) Interrupts TBD (target is 100,000 hours with 95% confidence) 11, edge-sensitive and configurable Power Requirements* Four PCI, level-sensitive +3.3V: 4.0 A DMA Channels +5V: 5.5 A Four 8-bit, three 16-bit; supports scatter/gather, F-Type DMA +12V: 0.1 A I/O –12V: 0.1 A USB Ports: Two Input power: 18W (for single 200 MHz without cache or DRAM) Serial Ports: Two RS-232 (16550) w/ 16Byte FIFO, as COM1–4 with Environmental* selectable IRQs and BIOS selectable addressing Operating Storage/Transit Parallel Port: One bi-directional port with all IEEE 1284 protocols supported Temperature: 0° C to 55° C –20° C to +60° C (compatibility, nibble, byte, EPP, and ECP) with selectable Humidity (NC): 10 to 85% @ 40° C — IRQs and BIOS selectable addressing Altitude: 15,000 ft. (4,572 m) 50,000 ft. (15,240 m) Floppy Disk: Support for two drives (360K to 2.88MB support) Vibration: 1 G RMS 6 Gs RMS EIDE: Bus master PCI-EIDE, support for four drives in master/slave 20-2000 Hz random 20-2000 Hz random configuration with LBA and PIO mode 0–4 support (one channel used for on-board IDE Flash disk) Safety SCSI: PCI Ultra SCSI (Adaptec 7880, 8-bit fast, 16-bit fast/wide or All printed wiring boards (PWBs) are manufactured with a flammability rating of mixture) 94V-0 by UL recognized manufacturers. Ethernet: Dual PCI 10/100Mb Ethernet, 10Base-T/100Base-TX (Intel Electromagnetic Compatibility (EMC) 82559) Intended for use in systems meeting the following regulations: Video: AGP graphics with 2MB video SRAM (C&T 690xx); access to U.S.: FCC Part 15, Subpart B, Class A (non-residential) flat panel signals provided Canada: ICES-003, Class A (non-residential) Connectors Motorola Computer Group board products are tested in a representative system to Rear I/O bracket: PS/2 mouse and keyboard (6-pin Mini-DIN); SVGA (15-pin the following standards (results pending): Dsub), two Ethernet (RJ45 w/ transmit/receive indicators) CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: Headers: Two USB, two serial ports (10-pin shrouded), parallel port EN55022 Class B; Immunity: EN50082-1 (26-pin shrouded), two Ultra EIDE (40-pin shrouded), SCSI- 2 (68-pin micro D, wide receptacle), AT-style keyboard, Warranty EIDE and SCSI disk LEDs, and alarm monitor signals Five-year limited warranty Clock/calendar Year 2000 Readiness Real-time clock with (replaceable) battery backup, includes 256-byte CMOS This product is year 2000 ready as defined by Motorola Computer Group. For additional information, reference http://www.mcg.mot.com/year2000. For more information, visit our World Wide Web site at http://www.mcg.mot.com To call us dial 1-800-759-1107 in the U.S. and 512-434-1526 outside of the U.S. Corporate headquarters address: Motorola Computer Group, 2900 S. Diablo Way, Tempe, AZ 85282 Copyright 1999 Motorola, Inc. Computer Group Data Sheet: PV530-D1 Motorola and the Motorola logo are registered trademarks of Motorola, Inc. Intel and Pentium are registered trademarks of Intel Corporation. PICMG and CompactPCI are registered trademarks of PCI Industrial Computer Manufacturers Group. CompactFlash is a trademark of SanDisk Corporation. PhoenixBIOS is a common law trademark of Phoenix Technologies Ltd. All other names, products, and/or services mentioned may be trademarks or registered trademarks of their respective holders. This data sheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. *verification pending