MVME2600 VME Processor Modules ™ ™ � PowerPC 603 or PowerPC 604 32-bit microprocessor � L1 cache—16KB/16KB on PowerPC 603, 32KB/32KB on PowerPC 604 � 256KB L2 cache � Up to 512MB ECC DRAM using RAM200 memory expansion modules � 8MB on-board Flash, 1MB socketed � 64-bit PCI mezzanine connector � On-board debug monitor with self-test diagnostics � IEEE P1386.1 compatible 32/64-bit PMC expansion slot � 2 or 3 async, 1 or 2 sync/async serial ports � Ethernet transceiver interface with 32-bit PCI local bus DMA � 8- or 16-bit Fast SCSI-2 bus interface � Parallel, floppy, keyboard and mouse interfaces � 8KB x 8 NVRAM and time-of-day clock with replaceable battery backup � Four 32-bit timers, one watchdog timer PMC expansion combined with a high-performance VME processor The MVME2600 Series is a family of VME processor modules based on the ® Motorola PowerPlus VME architecture with PowerPC microprocessors that push performance and functionality to limits unprecedented on VME. The flexibility of the MVME2600 provides an excellent base platform that can be quickly and easily customized for a variety of industry-specific applications. Designed to meet the needs of military and aerospace, industrial automation, and medical, MVME2600 applies to a variety of applications. DRAM expan- sion mezzanines enable memory upgrades to the maximum 512MB of ECC DRAM without requiring additional VME slots. FLASH L2 Cache 1 MB Two PLCCs 256KB RAM200 603 or 604 (Socketed) 0 to 512MB Memory 16 Expansion PCI Chipset ECC DRAM Controller Bridge 4MB or 8MB FLASH PowerPC Bus—A32/D64-bit x 2 PCI Expansion 64 64 PCI Local Bus—A32/D64-bit 64 64 1 PMC SCSI-2 FAST Ethernet PCI to VME PCI to ISA Slot SYM 53C825A DEC 21140 Bridge Bridge Tundra Universe W83C553 SCSI 10/100BaseT or AIU PMC I/O ISA Bus—A16/D8-bit Parallel Port IEEE1284 or P1 P2 Centronics Sync Serial Floppy NVRAM Zilog 85230/8536 RTC Super I/O Serial 1 MK48T59 National Serial 2 87308 PS/2 Mouse, Serial 3 Serial 4 Keyboard MVME2600 Details EIA-530, V.35, or X.21 DCE or DTE via the installation of MVME2600 Details Motorola Serial Interface Modules (SIMs). A P2 adapter provides interface module signals to the PCI Expansion MVME761 transition module. The 3-row P2 adapter can be MVME2600 modules have a 64-bit PCI connection to support used for 8-bit SCSI. A 5-row P2 adapter supports 16-bit SCSI PCI expansion carriers such as Motorola PMCspan. Design and PMC I/O. details for the connector and electrical specifications are MVME712M available from your local Motorola representative. The MVME712M transition module provides industry-stan- Memory Modules ® dard connector access to the Centronics parallel port, an The MVME2600 series has a modular memory design. Mez- AUI port, and four DB-25 connectors providing access to the zanine arrays support up to 512MB of add-on DRAM. These asynchronous/synchronous serial ports jumper configurable RAM200 expansion modules allow field upgrades of the as EIA-232 DCE or DTE. A P2 adapter provides interface sig- memory capacity and do not require additional VME slots. nals to the MVME712M transition module. The 3-row P2 Transition Modules adapter can be used for 8-bit SCSI. Two artwork variants of the MVME2600 are available. One To gain access to the additional user definable I/O pins pro- series provides backward compatibility with the MVME712M vided via the 5-row VME64 extension connector, a special P2 transition module I/O. The other series accepts the adapter board is available. This adapter panel replaces the MVME761 transition module that features an additional sync/ traditional 3-row P2 adapter and extends its capability by pro- async serial port, a 10/100BaseT interface, Fast 16-bit SCSI, viding access to the PMC I/O pins. and an IEEE 1284 compatible parallel port. Several other variations of the MVME712M are available for MVME761 combinations of I/O and connectors. The MVME761 transition module provides industry-standard connector access to the IEEE 1284 parallel port, a 10BaseT Operating Systems and Real-Time Kernels Motorola Computer Group: AIX or 100BaseT port via an RJ-45 connector, two DB-9 connec- ™ Integrated Systems, Inc.: pSOSystem tors providing access to the asynchronous serial ports config- ™ Lynx Real-Time Systems, Inc.: LynxOS ured as EIA-574 DTE, and two HD-26 connectors providing ® ™ Microware Systems access to the sync/async serial ports. These serial ports, OS-9 /OS-9000 Corporation: labeled as Serial 3 and Serial 4 on the face plate of the ™ Microtec: VRTX32 MVME761, are individually user configurable as EIA-232, ® Wind River Systems, Inc.: VxWorks SNAPHAT Battery Firmware Monitor VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014) Controller: Tundra Universe Firmware must fulfill the traditional functions of test and initial- DTB Master: ization, in addition to operating system boot support. The A16–A32; D08–D64, BLT MVME2600 firmware monitor exceeds these requirements DTB Slave: A24–A32; D08–D64, BLT, UAT with a proven monitor from the embedded VME leader. It Arbiter: RR/PRI expands features like power-up tests with extensive diagnos- Interrupt Handler/ IRQ 1–7/Any one of seven IRQs Generator: tics, as well as a powerful evaluation and debug tool for sim- System Controller: Yes, jumperable or auto detect ple checkout or when high-level development debuggers Location Monitor: Two, LMA32 require additional support. All this is included with the MVME2600 firmware, plus it supports booting both operating Ethernet Interface systems and kernels. MVME761 MVME712M Controller Specifications DEC 21140 DEC 21140 Interface Speed: 10/100Mb/s AUI (10Mb/s) Specifications PCI Local bus DMA: Yes, with PCI burst Yes, with PCI burst Processor Connector: Routed to P2, Routed to P2, Microprocessor: MPC603 MPC603 MPC604 MPC604 RJ-45 on MVME761 DB-15 AUI on MVME712M Clock Frequency: 200 MHz 200 MHz 333 MHz 400 MHz On-chip Cache (I/D): 16K/16K 16K/16K TBD TBD SCSI Interface Memory Type: MVME761 MVME712M 60ns 50ns TBD TBD FPM EDO Controller: Symbios 53C825A Symbios 53C825A SPECint95, 5.2 5.3 TBD TBD PCI Local Bus DMA: Yes, with PCI local Yes, with PCI local estimated: bus burst bus burst SPECfp95, estimated: 3.7 4.0 TBD TBD Asynchronous: 5.0MB/s 5.0MB/s Synchronous: Memory 10.0MB/s (8-bit 10.0MB/s (8-bit MAIN MEMORY: mode), 20.0MB/s mode), 20.0MB/s Dynamic RAM (16-bit mode) (16-bit mode) Capacity (60ns FPM): 16, 32, or 64MB on RAM200 Connector: Routed to P2, 50- or Routed to P2, SCSI Capacity (50ns EDO): 128 or 256MB on RAM200 68-pin on D-50 on Single Cycle Accesses: 9 Read/4 Write MVME761EXT MVME712M Read Burst Mode (60ns 9-1-2-1 idle; 3-1-2-1 aligned page hit Asynchronous Serial Ports FPM): MVME761 MVME712M Read Burst Mode (50ns 8-1-1-1 idle; 2-1-1-1 aligned page hit EDO): Controller PC87308 PC87308, 85230/ Write Burst Mode: 8536 4-1-1-1 idle; 3-1-1-1 aligned page hit Number of Ports: Architecture: Two, 16550 compat- Two, 16550 compat- 128-bit, two-way interleaved ible ible and one 85230/ Parity/ECC: No/Yes 8536 L2 CACHE: 256KB Configuration: EIA-574 DTE EIA-232 DCE/DTE Cache Bus Clock Processor clock divided by 2 Async Baud Rate, 38.4K EIA-232, 38.4K EIA-232, Frequency: bps max.: 115Kbps raw 115Kbps raw FLASH: On-board programmable Connector: Routed to P2, DB-9 Routed to P2, DB-25 Capacity: 1MB via two 32-pin PLCC/CLCC sock- on MVME761 on MVME712M ets; 8MB surface mount Read Access (8MB port): Synchronous Serial Ports 68 clocks (32 byte burst) MVME761 MVME712M Read Access (1MB port): 260 clocks (8 byte burst) Controller 85230/8536 85230/8536 Write Access (1MB/8MB): 19 clocks (2 bytes/8 bytes) Number of Ports: Two One NVRAM: 8KB (4KB available for users) Configuration: TTL to P2 (both EIA-232 DCE/DTE Cell Storage Life: 50 years at 55° C ports), SIM on Cell Capacity Life: 10 years at 100% duty cycle MVME761 Removable Battery: Yes Baud Rate, bps max.: 2.5M sync, 38.4K 2.5M sync, 38.4K async async PCI Expansion Connector Oscillator Clock Rate 10 MHz/5 MHz 10 MHz/5 MHz Address/Data: A32/D32/D64 (PCLK): PCI Bus Clock: 33 MHz Connector: Routed to P2, HD- Routed to P2, DB- Signaling: 5V 26 on MVME761 25 on MVME712M Connector: 114-pin connector located on the pla- nar of the MVME2700 between P1 and P2 Transition Modules Parallel Port MVME761 MVME712M Transition Modules Controller PC87308 PC87308 I/O Connectors Configuration: 8-bit bidirectional, 8-bit bidirectional, MVME761 MVME712M full IEEE 1284 sup- IEEE 1284 minus port; Centronics EPP and ECP Asynchronous Two, DB-9 labeled as Three, DB-25 labeled Serial Ports: compatible COM1 and COM2 as Serial 1, Serial 2, and Serial 3 Modes: Master only Master only Synchronous Two, HD-26 labeled as One, DB-25 labeled as Connector: Routed to P2, HD- Routed to P2, D-36 Serial Ports: Serial 3 and Serial 4 Serial 4 36 on MVME761 on MVME712M (user configurable via Counters/Timers installation of SIMs), TOD Clock Device: Two 60-pin connectors M48T18; 8KB NVRAM on MVME761 planar Real-Time Timers/ Four, 32-bit programmable for installation of two Counters: SIMs Watchdog Timer: Time-out generates reset Parallel Port: HD-36, Centronics D-36, Centronics com- Floppy compatible patible Controller: PC87308 Ethernet: 10BaseT or 10Mb/s Ethernet Compatible Controllers: 100BaseTX RJ-45 DB-15 AUI DP8473, 765A, N82077 SCSI: Configuration: 8- or 16-bit, 50- or 68- 8-bit, standard SCSI D- 3.5" 2.88MB and 1.44MB; 5.25" 1.2MB pin connector via P2 50 Connector: HD-50 on front panel adapter Mouse Interface Board Size Controller: PC87308 Height: 233.4 mm (9.2 in.) Connector: 6-pin circular female mini DIN on front Depth: 80.0 mm (3.1 in.) panel Front Panel Height: 261.8 mm (10.3 in.) Keyboard Interface Width: 19.8 mm (0.8 in.) Controller: PC87308 All Modules Connector: 6-pin circular female mini DIN on front panel All Modules IEEE P1386.1 PCI Mezzanine Card Slot Power Requirements Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, (not including power required by PMC or external AUI transceiver) PN4 connectors +5V ± 5% +12V ± 10% –12V ± 10% PCI Bus Clock: 33 MHz MVME2603-1141: 6.75 A typ. 250 mA typ. 100 mA typ. Signaling: 5V 8.5 A max. 500 mA max. 250 mA max. Power: +3.3V, +5V, ±12V; 7.5 watts maximum MVME2604-1341: 8.0 A typ. 250 mA typ. 100 mA typ. per PMC slot 10.0 A max. 500 mA max. 250 mA max. Module Types: Basic, single-wide, front panel I/O or P2 MVME2603-2141: 6.25 A typ. 250 mA typ. 100 mA typ. I/O (Note: P2 I/O is only accessible to 8.0 A max. 500 mA max. 250 mA max. systems equipped for VME64 extension MVME2604-4341: connectors.) 7.5 A typ. 250 mA typ. 100 mA typ. 9.5 A max. 500 mA max. 250 mA max. Board Size –12V power is not used on the MVME2600 but is supplied for use Height: 233.4 mm (9.2 in.) by other devices (such as PMC); requirements vary by device Depth: 160.0 mm (6.3 in.) Demonstrated MTBF Front Panel Height: 261.8 mm (10.3 in.) (based on a sample of eight boards in accelerated stress environ- Width: 19.8 mm (0.8 in.) ment) Max. Component 14.8 mm (0.58 in.) Mean: 190,509 hours Height: 95% Confidence: 107,681 hours Miscellaneous Environmental Reset and abort switches on front panel; six LEDs for FAIL, CHKSTP, Operating Nonoperating CPU, PCI, SCON, and FUSE Temperature: 0° C to +55° C, –40° C to +85° C forced air cooling Altitude: 5,000 m 15,000 m Humidity (NC): 10% to 80% 10% to 90% Vibration: 2 Gs RMS, 6 Gs RMS, 20–2000 Hz random 20–2000 Hz random Electromagnetic Compatibility (EMC) MVME761 Transition Module Intended for use in systems meeting the following regulations: MVME761-001 Transition module: Two DB-9 async serial U.S.: FCC Part 15, Subpart B, Class A (non-residential) port connectors, two HD-26 sync/async Canada: serial port connectors, one HD-36 parallel ICES-003, Class A (non-residential) port connector, one RJ-45 10/100 Ethernet This product was tested in a representative system to the following connector; includes 3-row DIN P2 adapter standards: module and cable CE Mark per European EMC Directive 89/336/EEC with Amend- MVME761-011 Transition module: Two DB-9 async serial ments; Emissions: EN55022 Class B; Immunity: EN50082-1 port connectors, two HD-26 sync/async Safety serial port connectors, one HD-36 parallel All printed wiring boards (PWBs) are manufactured with a flammabil- port connector, one RJ-45 10/100 Ethernet ity rating of 94V-0 by UL recognized manufacturers. connector; includes 5-row DIN P2 adapter module and cable; requires backplane with Ordering Information 5-row DIN connectors Ordering Information MVME761P2-011 5-row DIN P2 adapter compatible with MVME761; connectors for 16-bit (wide) SCSI and PMC I/O; requires backplane with 5-row DIN connectors Part Number Description MVME761EXT MVME761 I/O extension module, connec- MVME2600 with MVME761 I/O tors for Ethernet, SCSI and PMC I/O All modules include 9MB Flash. SIM232DCE or DTE EIA-232 DCE or DTE Serial Interface Mod- MVME2603-1121C to 200 MHz MPC603, 16MB–256MB ECC ule MVME2603-1161C DRAM, IEEE 1101 compatible front panel SIM530DCE or DTE EIA-530 DCE or DTE Serial Interface Mod- with injector/ejector handles ule MVME2603-3121 to 200 MHz MPC603, 16MB–256MB ECC MVME2603-3161 SIMV35DCE or DTE V.35 DCE or DTE Serial Interface Module DRAM, original VME Scanbe front panel and handles SIMX21DCE or DTE X.21 DCE or DTE Serial Interface Module MVME2604-1321 to 333 MHz MPC604, 16MB–256MB ECC MVME712 Transition Module MVME2604-1361 DRAM, IEEE 1101 compatible front panel MVME712M Transition module: One DB-25 sync/async with injector/ejector handles serial port connector, three DB-25 async MVME2604-1401 to 400 MHz MPC604, 0–512MB ECC DRAM, serial port connectors, one AIU connector MVME2604-1471 IEEE 1101 compatible front panel with for Ethernet, one D-36 parallel port connec- injector/ejector handles tor, and one 50-pin 8-bit SCSI connector; MVME2604-3321 to includes 3-row DIN P2 adapter module and 400 MHz MPC604, 16MB–256MB ECC MVME2604-3361 cable DRAM, original VME Scanbe front panel and handles Related Products MVME2604-3401 to 400 MHz MPC604, 0–512MB ECC DRAM, PMCSPAN-001 Primary 32-bit PCI expansion, mates MVME2604-3471 original VME Scanbe front panel and han- directly to the MVME2600 providing slots dles for either two single-wide or one double- wide PMC card, accepts optional PMCS- MVME2600 with MVME712 I/O PAN-010, IEEE 1101 compatible front panel MVME2603-4121 to 200 MHz MPC603, 16MB–128MB ECC with injector/ejector handles MVME2603-4151 DRAM, 9MB Flash, original VME Scanbe PMCSPAN1-001 PMCSPAN-001 with original VME Scanbe front panel and handles front panel and handles MVME2603-5121 to 200 MHz MPC603, 16MB–32MB ECC MVME2603-5131 PMCSPAN-010 Secondary 32-bit PCI expansion, plugs DRAM, 9MB Flash, IEEE 1101 compatible directly into PMCSPAN-001 providing two front panel with injector/ejector handles additional PMC slots MVME2604-4321 to 333 MHz MPC604, 16MB–256MB ECC MVME2604-4361 PMCSPAN1-010 PMCSPAN-010 with original VME Scanbe DRAM, 9MB Flash, original VME Scanbe front panel and handles front panel and handles MPMCxxx MVME2604-4401 to Motorola’s family of PMC modules; ask your 400 MHz MPC604, 0–512MB ECC DRAM, MVME2604-4471 sales representative for details 9MB Flash, original VME Scanbe front panel and handles RAM200-043A 32MB ECC DRAM mezzanine, 8MB Flash, non-stackable RAM200-044A 64MB ECC DRAM mezzanine, 8MB Flash, non-stackable RAM200-045A 128MB ECC DRAM mezzanine, 8MB Flash, non-stackable RAM200-046A 256MB ECC DRAM mezzanine, 8MB Flash, non-stackable RAM200-047A 512MB ECC DRAM mezzanine, 8MB Flash, non-stackable Documentation V2600A/IH MVME2600 Installation and Use V2600A/PG MVME2600/2700 Programmer’s Reference Guide VME761A/IH MVME761 Transition Module Installation and Use www.motorola.com/computer VME712A/IH MVME712 Transition Module Installation and Use 1-800-759-1107 PPCBUGA1/UM PPCBug Firmware Package User’s Manual and PPCBUGA2/UM Motorola Computer Group 2900 S. Diablo Way PPCDIAA/UM PPCBug Diagnostics Manual Tempe, AZ 85282 Notes on Ordering Information 1. Major revision levels are indicated by alpha character at end of part number. Regional Sales Offices 2. Board support package source and object modules available upon request. Canada & Central Pan America 3. Documentation is available for on-line viewing and ordering at http://www.motorola.com/ 400 Matheson Blvd. West computer/literature. Mississauga, Ontario L5R 3M1 Canada 905-507-7135 or 888-366-3624 Eastern Pan America 1650 Tysons Boulevard, Suite 250 McLean, VA 22102 703-714-0725 Western Pan America 1150 Kifer Road, Suite 202 Sunnyvale, CA 94086 408-991-8633 Asia Pacific and Japan 34/F Nat West Tower Times Square, 1 Matheson St Causeway Bay, Hong Kong 852-2966-3209 East Mediterranean 6 HaTaas Street Ramat-Gan, Isreal 52523 972-3-610-4388 France Zone Technopolis - Immeuble THETA 3, avenue du Canada - BP304 91958 LES ULIS Courtaboeuf Cedex, France +33 (0) 1 64 86 64 00 Germany Hagenauer Strasse 47 D-65203 Wiesbaden, Germany +49 (0) 611-3611 604 Benelux De Waal 26, 5684 PH Best PO Box 350, 5680 AJ Best Netherlands +31 4993 61250 Nordic Dalvagen 2 S-169 56 Solna, Sweden +46 (0) 8 734 8800 United Kingdom London Road, Old Basing, Basingstoke, Hampshire RG24 7JL England +44 (0) 1256 790555 Motorola and the Motorola logo are registered trademarks and The Heart of Smart, DigitalDNA and the DigitalDNA logo are trademarks of Motorola, Inc. AIX is a registered trademark of International Business Machines Corporation. PowerPC and the PowerPC logo are registered trademarks; and PowerPC 603 and PowerPC 604 are trademarks of International Business Machines Corporation and are used by Motorola, Inc. under license from International Business Machines Corporation. Centronics is a registered trademark of Centronics Data Computer Corporation. All other names, products, and/or services mentioned may be trademarks or registered trademarks of their respective holders. This data sheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. Copyright 1997 Motorola Inc. 2600X-D4 5/00