MOTOROLA MCP750
Specifications
I/O
EIDE, 10/100 Ethernet, USB, serial (sync/ async), parallel
I/O Access
Front and rear
Memory
Up to 256MB DRAM, 1MB L2 cache, Compact- Flash IDE flash drive
PMC Site
Yes
Processor
233MHz or 366MHz PowerPC 750
Features
- 10/100Mb/s Ethernet interface
- 16 to 256MB of ECC DRAM
- 32KB/32KB L1 cache, 1MB L2 cache
- 64-bit CompactPCI interface
- 8K x 8 NVRAM and time-of-day clock with replaceable battery backup
- CompactFlash memory card socket
- Four 32-bit timers, three watchdog timers
- On-board debug monitor with self-test diagnostics
- Optional secondary CompactPCI interface
- PCI Enhanced IDE (EIDE) controller and floppy disk controller
- PowerPC 750 32-bit microprocessor
- Single 32/64-bit PMC expansion slot with front panel or backplane I/O
- Single CompactPCI slot, even when fully configured
- Two async serial ports, two async/sync serial ports, parallel port, keyboard, and mouse
- Two Universal Serial Bus (USB) ports
- Up to 9MB on-board Flash memory
Datasheet
Extracted Text
MCP750 TM CompactPCI Host Slot Processor ® � PowerPC 750 32-bit microprocessor � 32KB/32KB L1 cache, 1MB L2 cache � 16 to 256MB of ECC DRAM � Up to 9MB on-board Flash memory ™ � CompactFlash memory card socket � 10/100Mb/s Ethernet interface � Single 32/64-bit PMC expansion slot with front panel or backplane I/O � Two Universal Serial Bus (USB) ports � Two async serial ports, two async/sync serial ports, parallel port, keyboard, and mouse � PCI Enhanced IDE (EIDE) controller and floppy disk controller � On-board debug monitor with self-test diagnostics � 8K x 8 NVRAM and time-of-day clock with replaceable battery backup � Four 32-bit timers, three watchdog timers ® � 64-bit CompactPCI interface � Optional secondary CompactPCI interface � Single CompactPCI slot, even when fully configured Presents optimum performance from Motorola’s low-power, high- performance microprocessor The MCP750 series is a family of PowerPC microprocessor-based CompactPCI host-slot processor modules. Benefiting from Motorola’s PowerPlus Architecture, the MCP750 series pushes performance and func- tionality to unprecedented levels. Utilizing Motorola’s low-power, high-performance PowerPC 750 microproces- sors with 1MB of secondary cache, the peripheral component interconnect (PCI) bus for the on-board peripherals, processor/memory bus to PCI bus bridge, and a 64-bit bridge to the CompactPCI interface, the MCP750 packs optimum performance and functionality in just a single CompactPCI slot. RAM300 Memory Expansion • ECC DRAM 16 to 256MB L2 Cache • FLASH 1MB 4/8MB FLASH 1 MB MPC750 Memory PCI Bridge PCI Bridge Controller PowerPC Bus—64 bit Memory Bus—144 bit ISA Bus—A16/D8 CompactPCI Bus—64 bit 2 Serial NVRAM Super I/O EIDE PCI to ISA/IDE Sync/Async RTC PMC I/O Bridge 8KB IDE FLASH Socket Serial Serial Kbd/Mouse Parallel USB USB Async Async 1 PMC PCI Bus—64 bit Serial Serial Ethernet Slot 10/100BaseT MCP750 Details Specifications MCP750 Details Specifications TMCP700 Processor Microprocessor: The TMCP700 transition module provides industry-standard 233/366/466 MHz MPC750 On-chip Cache (I/D): connector access to the IEEE-1284 parallel port, a single 32K/32K mouse/keyboard connector, two USB Series A receptacles, Memory EIDE and floppy connectors, two RJ-45 connectors providing MAIN MEMORY: Dynamic RAM access to the asynchronous serial ports configured as EIA Capacity (60ns FPM): 16, 32, or 64MB on RAM300 DTE, and two HD-26 connectors providing access to the Capacity (50ns EDO): 128 or 256MB on RAM300 sync/async serial ports. These serial ports, labeled as Single Cycle Accesses: 9 read/4 write Serial 3 and Serial 4 on the face plate of the TMCP700, are Read Burst Mode 9-1-2-1 idle; 3-1-2-1 aligned page hit individually user configurable as EIA-232, EIA-530, V.35, or (60ns FPM): X.21 DCE or DTE via the installation of Motorola’s serial inter- Read Burst Mode 8-1-1-1 idle; 2-1-1-1 aligned page hit (50ns EDO): face modules (SIMs). Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned page hit Operating Systems and Kernels Architecture: 128-bit, 2 way interleaved MCP750 supports booting a complete range of real-time Parity/ECC: No/Yes operating systems and kernels which may be purchased from L2 CACHE: 1MB the following companies: Cache Bus Clock Processor clock divided by 2 (233 MHz) ™ Integrated Systems, pSOSystem Frequency: or by 2.5 (366 MHz) Inc.: FLASH: ™ On-board programmable Lynx Real-Time LynxOS Systems, Inc.: Capacity: 1MB via two 32-pin PLCC/CLCC sock- ® ™ ets; 4 or 8MB surface mount Microware Systems OS-9 /OS-9000 Corporation: Read Access (4MB port): 68 clocks (32 byte burst) ™ Microtec: VRTX32 Read Access (1MB port): 260 clocks (8 byte burst) ® Wind River Systems, VxWorks Write Access (1MB/4MB): 19 clocks (2 bytes/8 bytes) Inc.: NVRAM: 8KB, 4KB available for users Cell Storage Life: 50 years at 55° C Cell Capacity Life: 10 years at 100% duty cycle Removable Battery: Yes J1/J2 J4 Battery CompactPCI Interface Floppy Address/Data: Controller: A32/D32/D64 PC87307 PCI Bus Clock: Compatible Controllers: 33 MHz DP8473, 765A, N82077 Signaling: Configuration: 3.3V output, input defined by VIO 3.5" 2.88MB and 1.44MB; 5.25" 1.2MB Connector: Routed to J3, 34-pin header on Ethernet Interface TMCP700 ® Controller: Intel 21140 Interface Speed: Mouse/Keyboard Interface 10/100Mb/s Controller: PC87307 PCI Local bus DMA: Yes, with PCI burst Connector: Routed to J3, 6-pin mini DIN on Connector: RJ-45 on front panel TMCP700 Asynchronous Serial Ports IEEE P1386.1 PCI Mezzanine Card Slot Controller: PC87307 Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, Number of Ports: Two, 16550 compatible PN4 connectors Configuration: EIA-574-DTE PCI Bus Clock: 33 MHz Async Baud Rate, bps 38.4K EIA-232, 115Kbps raw Signaling: 5V max.: Power: +3.3V, +5V, ±12V, 7.5 watts maximum Connector (COM1): Front panel DB-9, also RJ-45 on per PMC slot TMCP700 Module Types: Basic, single-wide, front panel I/O or J3 Connector (COM2): Routed to J3, RJ-45 on TMCP700 I/O Synchronous Serial Ports CompactFlash Memory Card Interface Controller: 85230/8536 Controller: 82C586 Number of Ports: Two Interface: ATA, true IDE mode Configuration: TTL to P2 (both ports), SIM on CompactFlash Cards Motorola CFLASH-xxx series TMCP700 (optional): Baud Rate, bps max.: 2.5M sync, 38.4K async Connector: Standard 50-pin socket Oscillator Clock Rate 10 MHz/5 MHz (PCLK): Power Requirements (not including power required by PMC or SIMs) Connector: Routed to J3, HD-26 on TMCP700 +3.3V ±5% +5V ±5% Parallel Port (IEEE 1284) MCP750-1242: 1.9 A typ. 3.8 A typ. Controller: PC87307 2.5 A max. 4.4 A max. ® Compatibility: Centronics with TMCP700-001: 1.9 A typ. 4.0 A typ. Configuration: 8-bit bidirectional, full IEEE-1284 sup- 2.5 A max. 4.8 A max. port Demonstrated MTBF Modes: Master only (based on a sample of eight boards in accelerated stress environ- Connector: Routed to J5, HD-36 on TMCP700 ment) Mean: EIDE Interface 190,509 hours Controller: 82C586 95% Confidence: 107,681 hours Connector: Routed to J5, one 40-pin header on Board Size TMCP700 Height: 233.4 mm (9.2 in.) Counters/Timers Depth: 60.0 mm (6.3 in.) TOD Clock Device: M48T18, 8KB NVRAM Front Panel Height: 261.8 mm (10.3 in.) Real-Time Timers/ Four 32-bit programmable Width: 19.8 mm (0.8 in.) Counters: Max. Component 14.8 mm (0.58 in.) Watchdog Timers: Three, time-out generates reset Height: USB Miscellaneous Controller: 82C586 Reset and abort switches on front panel; four LEDs for FAIL, CPU, Connectors: Two Series A receptacles on front panel, PCI, and CPCI also routed to J5 for optional use of two Series A receptacles on TMCP700 TMCP700 Transition Module Ordering Information TMCP700 Transition Module Ordering Information Part Number Description Board Size MCP750-1222A 233 MHz MPC750, 16MB DRAM, 5MB Flash Height: 233.4 mm (9.2 in.) MCP750-1232A 233 MHz MPC750, 32MB DRAM, 5MB Flash Depth: 80.0 mm (3.1 in.) MCP750-1242A 233 MHz MPC750, 64MB DRAM, 5MB Flash Front Panel Height: 261.8 mm (10.3 in.) MCP750-1252A 233 MHz MPC750, 128MB DRAM, 5MB Flash Width: 19.8 mm (0.8 in.) MCP750-1262A 233 MHz MPC750, 256MB DRAM, 5MB Flash Transition Module I/O Connectors MCP750-1332 366 MHz MPC750, 32MB DRAM, 9MB Flash Asynchronous Serial Two, RJ-45 labeled as COM1and COM2 Ports: MCP750-1342 366 MHz MPC750, 64MB DRAM, 9MB Flash Synchronous Serial Two, HD-26 labeled as Serial 3 and MCP750-1352 366 MHz MPC750, 128MB DRAM, 9MB Flash Ports: Serial 4. User configurable via the installa- MCP750-1362 366 MHz MPC750, 256MB DRAM, 9MB Flash tion of SIMs. MCP750-1462 466 MHz MPC750, 256MB DRAM Two 60-pin connectors on TMCP700 planar for installation of two serial interface mod- MCP750-1462-RR 466 MHz MPC750, 256MB DRAM, remote reset ules. MCP750-366-F 366 MHz MPC750 (memory mezzanine Parallel Port: HD-36 Centronics compatible required) Mouse/Keyboard: 6-pin circular female mini DIN High Availability Versions USB: Two 4-pin Series A receptacles (High availability versions are used primarily in Motorola Computer Group (MCG) high availability system products.) Floppy: 34-pin header MCP750HA-1232 233 MHz MPC750, 32MB DRAM EIDE: One 40-pin headers MCP750HA-1242 233 MHz MPC750, 64MB DRAM PMC I/O: Two 64-pin headers (32 I/O, 32 ground each) MCP750HA-1252 233 MHz MPC750, 128MB DRAM MCP750HA-1262 233 MHz MPC750, 256MB DRAM Al l M odul es MCP750HA-233A 233 MHz MPC750 (memory mezzanine All Modules required) MCP750HA-233 233 MHz MPC750 (memory mezzanine Environmental required) Operating Nonoperating MCP750HA-366 366 MHz MPC750 (memory mezzanine Temperature: 0° C to +55° C, –40° C to +85° C required) forced air cooling exit air MCP750HA-466A 466 MHz MPC750, (memory mezzanine Humidity 10% to 80% 10% to 90% required) (NC): Vibration: 0.5 G RMS, 6.0 Gs RMS, 20–2000 Hz random 20–2000 Hz random Safety All printed wiring boards (PWBs) are manufactured with a flammabil- ity rating of 94V-0 by UL recognized manufacturers. Electromagnetic Compatibility (EMC) Intended for use in systems meeting the following regulations: U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) This product was tested in a representative system to the following standards: CE Mark per European EMC Directive 89/336/EEC with Amend- ments; Emissions: EN55022 Class B; Immunity: EN55024 Related Products TMCP700-001 Transition module: Two RJ-45 async serial port connectors, two HD-26 sync/async serial port connectors, one HD-36 parallel port connector, one mouse/keyboard 6-pin mini DIN, two 4-pin USB Series A receptacles SIM232DCE or DTE EIA-232 DCE or DTE Module www.motorola.com/computer SIM530DCE or DTE EIA-530 DCE or DTE Module 1-800-759-1107 SIMV35DCE or DTE V.35 DCE or DTE Module Motorola Computer Group RAM300-003 32MB ECC DRAM Mezzanine, 8MB Flash, non-stackable 2900 S. Diablo Way RAM300-004 64MB ECC DRAM Mezzanine, 8MB Flash, non-stackable Tempe, AZ 85282 RAM300-005 128MB ECC DRAM Mezzanine, 8MB Flash, non-stackable RAM300-006 256MB ECC DRAM Mezzanine, 8MB Flash, non-stackable Regional Sales Offices CFLASH-xxx CompactFlash memory card Canada & Central Pan America (where xxx = number of MB) 400 Matheson Blvd. West Mississauga, Ontario Documentation L5R 3M1 Canada MCP750A/IH MCP750 Installation and Use 905-507-7200 MCP750A/PG MCP750 Programmer’s Reference Guide Eastern Pan America 120 Turnpike Rd, 1st Floor TMCP700A/IH TMCP700 Transition Module Installation and Use Southborough, MA 01772 PPCBUGA1/UM and PPCBug Firmware Package User’s Manual, volumes 1 and 2 508-357-8260 PPCBUGA2/UM Western Pan America PPCDIAA/UM PPCBug Diagnostics Manual 1150 Kifer Road, Suite 100 Sunnyvale, CA 94086 Documentation is available for on-line viewing and ordering at http://www.motorola.com/ 408-991-8634 computer/literature. Asia Pacific and Japan 40/F Nat West Tower Times Square, 1 Matheson St Causeway Bay, Hong Kong 852-2966-3210 East Mediterranean 6 Kremenetski Street Tel Aviv 67899 Israel 972-3-568-4388 France Zone Technopolis - Immeuble THETA 3, avenue du Canada - BP304 91958 LES ULIS Courtaboeuf Cedex, France +33 (0) 1 64 86 64 24 Germany Hagenauer Strasse 47 D-65203 Wiesbaden, Germany +49 (0) 611-3611 604 Benelux De Waal 26, 5684 PH Best PO Box 350, 5680 AJ Best Netherlands +31 (0) 4993 61250 Nordic Dalvagen 2 S-169 56 Solna, Sweden +46 (0) 8 734 8880 United Kingdom London Road, Old Basing, Basingstoke, Hampshire RG24 7JL England +44 (0) 1256 790555 Motorola and the stylized M logo are registered trademarks and the Intelligence Everywhere logo, Digital DNA and the Digital DNA logo are trademarks of Motorola, Inc. PowerPC and the PowerPC logo are registered trademarks of International Business Machines Corporation and are used by Motorola, Inc. under license from International Business Machines Corporation. Intel is a registered trademark of Intel Corporation. CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group. CompactFlash is a trademark of SanDisk Corporation. All other product or service names are the property of their respective owners. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. ® Reg. U.S. Pat. & Tm. Off. Copyright 1997, 2001 Motorola Inc. CP750-D4 7/01
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MCP750 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers








What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods