Datasheet MBX2000 EBX Form Factor Motherboard Low power consumption and reduced heat dissipation combined in a small form factor EBX motherboard Motorola’s MBX2000 embedded controller provides a solution to customers who require low power consumption and reduced heat generation in a small form factor board. This EBX form factor board provides a wide array of standard features including a 266/333 MHz Intel Pentium II processor–Low Power supporting 66 MHz front-side bus frequency, 440BX AGPset, 10/100Mbit Ethernet, USB, IDE CompactFlash, graphics, watchdog and countdown timers, PCI/ISA support, Phoenix BIOS, and many other features. This EBX open architecture motherboard with value-added features, such as an on- board LCD interface, is ideal for embedded industrial automation, laboratory/scientific, medical, diagnostic, and communications applications. EBX also targets embedded applications such as vending machines, medical diagnostic touch screens, communications equipment, and information kiosks. ■266/333 MHz BGA1 Intel Pentium II processor–Low Pentium II Power MAX1617 BGA1 LM79■Intel 440BX AGPset with support for 66 MHz Serial 66 MHz Processor Bus EEPROM processor-side bus Intel 440BX 168-pin, 3.3V DIMM 66 MHz Memory Bus■256KB L2 cache 82443BX ECC SDRAM ■One DIMM slot supporting 3.3 V PC100 compatible 33 MHz 32-bit PCI Bus SDRAM memory CompactFlash C&T Ethernet■10/100Mbit Ethernet interface EIDE B 69030 82559/ER PIIX4E System Mgmt EIDE A Ultra 33 ■Optional accelerated 2D graphics with 4MB video Bus 82371EB USB A Flat Panel memory; available with VGA and flat panel BAT USB B Analog Video 10/100BaseT connectors Serial Port 0/1 BIOS Watchdog, Digital I/O■Four RS-232 serial ports (two RS-232, two Flash Interval IEEE-1284 ISA Bus Timers RS-232/422/485), parallel, floppy, PS/2 SIO Keyboard/Mouse keyboard/mouse support, two USB ports, IrDA Floppy EXAR Serial Port 2/3 header, and 16 digital I/O channels IrDA 16C2852 PC/104-Plus DUART ■PC/104 and PC/104-Plus expandability (ISA and PCI support) ■Watchdog timer, interval timers, and hardware monitor ■ATA/33 EIDE interface with CompactFlash Type II socket on one EIDE channel ® ■Supports Windows NT, Linux, and VxWorks operating systems ISA Expansion PCI Expansion MBX 2000 Details MBX2000 DETAILS Intel Pentium II Processor–Low-Power Super I/O Functions For embedded applications, the MBX2000 fully supports The National PC97317 provides a highly integrated set the Pentium II processor–Low Power. The processor is of functions: two asynchronous serial ports, two RS- combined with the Intel 440BX PCI chipset resulting in 234/422/485 ports, digital I/O, IEEE 1284 host parallel exceptional processing capability. The low-power port, floppy port, keyboard and mouse ports, and IrDA processor contains 32KB of internal Level 1 cache port. memory as well as 256KB of Level 2 cache delivering 2D Accelerated Graphics rapid data access to complex applications. Dynamic An optional CHIPS 69030 HiQVideo accelerator with execution and dual independent buses are additional 4MB integrated memory provides eye-opening 2D performance advantages. For continual processor speed accelerated graphics performance for human-machine enhancement options, consult your Motorola sales interfaces and imaging applications. Single view up to representative. 1280 x 1024. VGA and flat-panel interfaces are provided. Memory The MBX2000 provides one 168-pin DIMM site for on- board memory expansion. 256MB of PC100 compliant synchronous DRAM is supported. Sp ec ific atio ns SPECIFICATIONS Processor Bus Interfaces Single 266/333 MHz Intel Pentium II processor–Low Power PCI Bus: 32-bit PCI bus, up to 33 MHz is supported ISA Bus: 16-bit ISA bus, up to 8/33 MHz supported Cache PCI Bus Level 1: 16/16KB instruction/data Level 2: 256KB L2 (integrated) Controller: 82443BX Signaling: 5 V Memory Connector: PC/104-Plus Type: SDRAM with optional ECC (PC100 ISA Bus compliant) Capacity: Up to 256MB Controller: PIIX4E Signaling: 5 V Ultra DMA/33 EIDE Interface Connector: PC/104 Controller: 82371EB PCI-to-ISA/IDE Xcelerator (PIIX4E) IDE Flash Connections: Two; one connected to hard disk drive port Type: and one connected to Type II Type II CompactFlash CompactFlash port and hard disk drive Capacity: 2–192MB port Ethernet Super I/O Controller: Intel 82559ER Controller: National Semiconductor PC97317 Interface speed: 10/100Mb/s Interfaces: Two RS-232 serial ports, parallel port, Local Bus DMA: Yes PS/2 floppy port, PS/2 keyboard/mouse interfaces and an IrDA port Connector: RJ-45 2 MBX2000 Graphics RTC and CMOS RAM EPROM backup for CMOS RAM Controller: CHIPS 69030 2D accelerated video Video Memory: 4MB on-chip SDRAM USB Resolution: 1280 x 1024 max. Dual independent USB channels for 1.5Mb/s and 12Mb/s transfer Supervisory rates Watchdog Timer: Software Support Two-level, software programmable (100 msec. to 27 min.); drives interrupt, NMI, The MBX2000 is supported by a variety of operating systems, including SMI, system reset a complete range of real-time operating systems and kernels. LM79: Provides for temperature, fan speed, and voltage monitoring; single on-board Safety temperature sensor and limit register for local temperature monitoring and All printed wiring boards (PWBs) are manufactured with a flammability interrupt generation rating of 94V-0 or better. MAX1617: CPU temperature monitor Reset switch: Push-button reset Board Size Power Requirements EBX Form Factor: 203.2 mm (8.0 in.) x 146.1 mm (5.75 in.) Max. Component 19.1 mm (0.75 in.), without DIMM or Exclusive of attached daughter boards and/or peripherals. Height: PC/104 modules Notes: 1. The MBX2000A uses +5 VDC for standard operation Demonstrated MTBF 2. +5 VDC requirement for CompactFlash 3. ±12 VDC and +5 VDC requirement for flat panel (based on a sample of eight boards in an accelerated stress 4. ±12 VDC and –5 VDC requirement for PC/104, PC/104-Plus, other environment) add-on components Mean: 190,509 hours 95% Confidence: 107,681 hours 266 MHz Board +5 VDC Typical Power Configuration Environmental MBX2000A-101—no 2.8 Amp 14.0 W on-board graphics; Operating Nonoperating 128MB SDRAM @ 66 MHz Temperature: 0° C to +55° C –40° C to +70° C MBX2000A-102— 3.0 Amp 15.0 W Humidity 5% to 95% 5% to 95% with on-board (NC): graphics; 64MB Vibration: 1 G Sine Sweep 0.5 G Sine Sweep SDRAM @ 66 MHz 5–100 Hz 5–50 Hz; MBX2000A-102— 3.0 Amp 15.0 W 3 G Sine Sweep with on-board 50–500 Hz; graphics; 128MB SDRAM @ 66 MHz Electromagnetic Compatibility (EMC) MBX2000A-102— 3.3 Amp 16.5 W with on-board Intended for use in systems meeting the following regulations: graphics; 256MB U.S.: FCC Part 15, Subpart B, Class A or B SDRAM @ 66 MHz Canada: ICES-003, Class A or B 333 MHz Board +5 VDC Typical Power This product was tested in a representative system to the following Configuration standards: MBX2000A-103—no 3.0 Amp 15.0 W CE Mark per European EMC Directive 89/336/EEC with on-board graphics; Amendments; Emissions: EN55022 Class B; Immunity: EN55024 128MB SDRAM @ 66 MHz MBX2000A-104— 3.2 Amp 16.0 W with on-board graphics; 64MB SDRAM @ 66 MHz MBX2000A-104— 3.2 Amp 16.0 W with on-board graphics; 128MB SDRAM @ 66 MHz MBX2000A-104— 3.5 Amp 17.5 W with on-board graphics; 256MB SDRAM @ 66 MHz MBX2000 3 Ord erin g In formatio n ORDERING INFORMATION Part Number Description MBX2000-101A 266 MHz Pentium II processor, no on-board graphics MBX2000-102A 266 MHz Pentium II processor, on-board graphics MBX2000-103A 333 MHz Pentium II processor, no on-board graphics MBX2000-104A 333 MHz Pentium II processor, on-board graphics Memory Modules (1DIMM limit per order) MEMSDRM256-F 256MB, PC100, ECC, SDRAM MEMSDRM256-K 256MB, PC100, ECC, SDRAM Related Products MBX2000DEVKIT MBX2000 Development Kit: Mounting plate, Cable kit, which contains the following: • ATX to EBX power cable • Keyboard/mouse/reset cable • Parallel port transition cable • Serial port transition cable (dual port) • USB transition cable (dual port) • VGA transition cable • IDE ribbon cable (2mm, 44-position socket) Documentation MBX2000AA/IH MBX2000 Installation and Use Manual MBX2000A/PG MBX2000 Programmer’s Guide Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature Motorola Computer Group NORTH AMERICA: Tempe, AZ 800-759-1107 or 602-438-5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. Windows is a registered trademark of Microsoft Corporation. All other product or service names are the property of their respective owners. © 2001, 2002 Motorola, Inc. All rights reserved. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. MBX20-D3 12/02