DATASHEET KEY FEATURES ® ® Intel Pentium III based Functioning as a peripheral The ţ exibility of the CPN5365 CompactPCI compliant non- slot processor within the allows it to be used in a variety ® system slot CPU CompactPCI environment, of applications such as broad- the CPN5365 processor board band data or intelligent network Up to 1GB PC100 SDRAM can be customized quickly switching; CTI server; industrial Accelerated 2D graphics with and easily with PMC modules control and automation; military 4MB video memory to create an application-speciŢ c and aerospace; and medical, network blade. scientiŢ c, or imaging products. Dual 10/100BaseT Ethernet Software support includes Two universal serial bus (USB) Linux and VxWorks board channels support packages to speed Two asynchronous serial ports development and time-to-market. PS/2 keyboard/mouse, real-time clock, watchdog timer One bi-directional IEEE-1284 compliant parallel port Two 32/64-bit PMC expansion slots Optional on-board 2.5” EIDE hard drive (replaces one PMC site) Supported by industry-standard operating systems such as Linux and VxWorks See back page for details The Motorola CPN5365 processor board provides scalable performance and ţ exibility for non-host slot applications. It complements Motorola’s high availability platforms by providing integrated distributed computing required for demanding telecommunications applications. CPN5365 CompactPCI Peripheral Slot Processor Board COM 1 Ethernet RJ-45 RJ-45 PMC 2 PMC 1 LM81 System Monitor South Up to Ultra Ethernet Ethernet Bridge 1G I/O 10/100 10/100 (PIIX4) SDRAM Bridge Intel Pentium 2D Accelerated Module Video with 440GX CompactPCI Bus 4MB RAM J1 J2 J3 J4 J5 SYSTEM ARCHITECTUREE INTEL PENTIUM III PROCESSOR For embedded control applications, the CPN5365 fully supports the Intel Pentium III BGA2 processor. The processor ® is combined with the Intel 440GX PCI chipset resulting in excellent processing capability. The processor contains 32KB of internal Level 1 cache memory as well as 256KB of Level 2 cache delivering rapid data access to complex applications. Dynamic execution and dual independent buses are additional performance advantages. MEMORY The CPN5365 provides up to 1GB of PC100 compliant synchronous DRAM. Memory size is detected by the system BIOS. The CPN5365 features 512MB of DRAM. The board can support up to 1GB of DRAM by installing CPMEZZ-256 memory expansion modules. DUAL ETHERNET ® Two Intel 82559 Ethernet controllers provide redundant Ethernet ports for monitoring and telecom applications. One or both of these controllers can be used as a diagnostic interface allowing remote monitoring of system status (for example, voltage, temperature). One Ethernet RJ-45 connector is located on the front panel. Both Ethernet ports are also routed to the rear I/O. HOT SWAP COMPATIBLE The CPN5365 can be inserted or removed in a powered system. ENUM# services are in compliance with the PICMG 2.1 Hot Swap SpeciŢ cation. ON-BOARD PERIPHERALS The CPN5365 has an extensive array of on-board I/O available from both the front panel of the CPN5365 and/or the rear panel via the CPTM-01 transition module. Front panel I/O includes openings for PMC sites, one RJ-45 connector for Ethernet and one RJ-45 serial connector. Two Ethernet, PS/2 mouse and keyboard, one IDE (secondary), and PMC 2 I/O signals are routed through the backplane via CompactPCI connector J5; one IDE (primary), video, one parallel, and ţ oppy are routed via CompactPCI connector J4; and two serial, two USB, and PMC 1 I/O signals are routed via CompactPCI connector J3. COMPACTPCI BUS Designed to the CompactPCI interface standard, the CPN5365 supports a 64-bit PCI interface on the J1 and J2 physical CompactPCI connectors. On-card devices connect directly to the local bus. Off-card CompactPCI bus accesses are supported through the Intel 21555 PCI-PCI non-transparent bridge. 2 CPN5365 2D ACCELERATED GRAPHICS A 69030 HiQVideo accelerator with 4MB integrated memory provides eye-opening 2D accelerated graphics performance for human-machine interfaces and imaging applications. Resolutions up to 1600 x 1200 are supported. SPECIFICATIONS PROCESSOR ETHERNET 500/700 MHz Intel Pentium III BGA2 processor Controllers: Two Intel 82559 Intel 440GX chipset Interface: 10/100BaseT 100 MHz frontside bus frequency PCI Local Bus DMA: Yes, with PCI burst CACHE GRAPHICS Level 1: 16/16KB instruction/data Controller: 69030 HiQVideo 2D accelerated video Level 2: 256KB Video Memory: 4MB on-chip SDRAM Resolution: 1600 x 1200 max. MEMORY FRONT PANEL I/O INTERFACES Capacity: Up to 1GB DRAM: PC100 compliant synchronous, 60 ns, parity or PMC: Two knockouts to accommodate PMC I/O ECC mode Serial Port: One RJ-45 Ethernet: One RJ-45 COMPACTPCI INTERFACE Note: Additional devices may be attached via transition module. Compliance: PCI SpeciŢ cation Rev. 2.1 Connectors: J1/J2 BIOS FEATURES Address/Data Lines: 64 PCI Bus Clock: 33 MHz BIOS in ţ ash EPROM ® Controller: Intel 21555 PCI-to-PCI interface bridge chip Auto-conŢ guration or extended setup with serial/parallel ports remappable Signaling: +5V or +3.3V compliant Diskless, keyboardless and videoless operation extensions IEEE 1386.1 PCI MEZZANINE INTERFACE BIOS POST and Setup Address/Data Lines: 64 System and video BIOS shadowing PCI Bus Clock: 33 MHz Network boot using PXE (Preboot eXecution Signaling: 5V Environment) Power: +3.3V, +5V, ±12V CMOS backup to ţ ash (allows operation without battery) Module Types: Two single-wide or one double-wide, front-panel I/O or J3 and J5 I/O SUPERVISORY Note: Due to high component density, uninsulated traces Watchdog Timer: Two-level, software programmable and vias are located in the CPN5365’s host I/O keepout (0.46 sec. to 477 sec.); drives interrupt, NMI/system area. If installed, PMC modules having conductive I/O reset, or soft reset connectors could contact these traces and vias. If full IEEE 1386-2001 compliance is required, an insulating Alarm Microcontroller (NS LM81): CPU temperature shield should be installed. (user deŢ nable threshold alarm on selectable IRQ: 5, 7, 9, 11, NMI, or SCI), backplane and CPU voltages Reset Switch: Guarded, on front panel CLOCK/CALENDAR Front Panel LEDs: Power OK (green), Hot Swap (blue) Real-time clock with replaceable battery backup; includes On-board Headers: CompactFlash or EIDE, and single CMOS PMC site Rear Panel: Ethernet one and two ports, secondary IDE, INTERRUPTS PMC I/O, video, printer, ţ oppy, mouse/keyboard, COM1 Four CompactPCI level-sensitive interrupts, conŢ gurable and COM2, and USB0 and USB1 to any interrupt vector for plug-and-play compatibility. Note: All ISA on-board interrupts are plug-and-play compliant. CPN5365 3 MECHANICAL SAFETY 6U, 4HP wide (233 mm x 160 mm x 20 mm) All printed wiring boards (PWBs) are manufactured with a ţ ammability rating of 94V-0 by UL recognized Conforms to PICMG 2.0 CompactPCI (rev. 2.1) and manufacturers. PCI SIG 2.1 speciŢ cations DEMONSTRATED MTBF CPTM-01 TRANSITION MODULE I/O (based on a sample of eight boards in accelerated stress Transition module provides backplane I/O from J3, J4* environment) and J5 on the CPN5365. Mean: 190,509 hours On-board Headers: Dual USB, CompactFlash, EIDE, ţ oppy, serial, parallel, single PIM site 95%: ConŢ dence: 107,681 hours Rear Panel: Keyboard/mouse, dual Ethernet, video, (excluding on-board hard drive option) serial, knockout for PIM *J4 I/O is not available on models of the CPN5365 ENVIRONMENTAL without connector J4 (excluding on-board hard drive option) Operating Storage/Transit POWER REQUIREMENTS Temperature: 0° C to +55° C –40° C to +70° C (excluding power required by drive option and PMC Humidity (NC): 5 to 90% 5 to 95% modules) Vibration: 0.5 G RMS 6 Gs RM 500/700 MHz 20–2000 Hz random 20–2000 Hz random +5V 2.0 A typ., 3.5 A max. +3.3V 2.0 A typ., 2.5 A max. ELECTROMAGNETIC COMPATIBILITY (EMC) +12V <50 mA typ., <100 mA max. Intended for use in systems meeting the following –12V <25 mA max. regulations: U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) ORDERING INFORMATION Part Number Description CPN5365-700-01 700 MHz, 512MB SDRAM, two PMC sites CPN5365-700-02 700 MHz, 512MB SDRAM, one PMC site, hard drive CPN5365-700-03 700 MHz, 512MB SDRAM, two PMC sites, no J4 CPN5365-700-04 700 MHz, 512MB SDRAM, one PMC site, hard drive, no J4 Transition Modules CPTM-01 Transition module with keyboard/mouse, dual Ethernet, video, COM1 Memory Modules CPMEZZ-256B 256MB memory mezzanine, bottom installation CPMEZZ-256T 256MB memory mezzanine, top installation Documentation CPN5365A/IH CPIP5365 Single-Board Computer and CPTM-01 Transition Module Installation and Use Documentation is available for on-line viewing and ordering at www.motorola.com/computer/literature. 4 CPN5365 PMC MODULE SUPPORT Motorola offers PMC modules that complement and enhance the functionality of the CPN5365. Additional information is available at http://www.motorola.com/computer or by contacting a Motorola sales representative or authorized distributor. USER NOTE: SPECIFICATIONS FOR 2.5” DISK DRIVES Your attention is directed to the fact that the MTBF of any drives mounted on these blades must be considered independently of the MTBF of the blades themselves. Also, the supported operating parameters of the drives may differ substantially from those of the blades. It is the User’s responsibility to ensure that the operating parameters of these drive offerings are well understood and taken into consideration when designing operating use. The operating parameters of our current drive offerings can be found on the Motorola Technical Publications Web site at www.motorola.com/computer/literature. Future RoHS Status Motorola does not intend to redesign this product for RoHS compliance. This product will only be sold and shipped to customers until the RoHS deadline (June 30th, 2006). After that date, it will no longer be available. SOLUTION SERVICES Motorola provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. And solution extras include enhanced warranty and repairs. Sales OfŢ ces Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Tel Aviv, Israel +972 3 568 4385 Paris, France +33 1 69 35 25 88 Shanghai, China +86 215292 5693 Munich, Germany +49 89 608 14-0 Tokyo, Japan +81 3 5424 3101 Loughborough, UK +44 1509 634300 Hong Kong, China +852 2966 3209 This document identiŢ es products, their speciŢ cations, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgment to conŢ rm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. www.motorola.com/computing MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark OfŢ ce. CompactPCI and PICMG are registered trademarks of the PCI Industrial Computer Manufacturers Group. Intel and Pentium are registered trademarks Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005 CPN5365-D5 10/05