Industrial Tower & Wall-Mount Chassis Series Introduction Features � Passive backplane with choice of 8-slot ISA, 10-slot The MCH-215A is a rugged tower or wallmount PICMG (4 ISA/4 PCI/ 2 PICMG) or baby-AT sized chassis featuring a passive backplane with choice of motherboard. configurations -8-slot ISA or 10-slot PICMG for use in � Tower or wall-mount chassis made of heavy-duty steel. industrial environment. The MCH-215A can also be � 270W power supply that is UL, CSA, TUV, and CE certified. configured with a low cost baby-AT sized motherboard � One 32.5-CFM cooling fan with easy-toclean washable air for commercial use. filter. � Front accessible four-drive bay - one half-height 3.5" and The MCH-215A is constructed with heavyduty steel three half-height 5.25". � Adjustable hold-down clamp for card protection against and includes a standard 270W power supply that is vibration. UL, CSA and TUV certified. The MCH-215A contains one high speed cooling fan and four easy-to-maintain front accessible drive bays that are capable of housing one half-height 3.5" and three halfheight 5.25" disk drives. The MCH-215A is available in a wide range of systems, including slot board computer, motherboard, DRAM, hard drives, and video upgrades. For detailed information, please refer to MiTAC's Configuration Guide. MCH-215A Industrial Tower & Wall-Mount Chassis Series Specifications Physical Dimensions Power Supply 410 x 330 x 176 mm (L x W x H) +12V @ 10A (cont.) -5V @ 0.5A Net Weight Net Weight: 14.5kg -12V @ 0.5A Gross Weight: 15.5 Kg Add-on Card Bridge Flexible card clamp can protect add-on Construction Heavy-duty steel and Card Clamp cards from vibration Cooling Fan Dimensions (L x W x H): Switches Power On/Off switch 80mm x 80mm x 20mm Reset switch Capacity: Connectors Front Side: 32.5 CFM with washable air filter One AT keyboard connector Disk Drive Bay Capable of housing up to four drives, Rear Side: one 3.5” half-height drive and three One 9-pin and one 25-pin reserved 5.25” half-height drives are accessible ports from the front panel Operating Power Supply 0° ~ 55º C (32° ~ 131º F) Rated Input: Temperature AC115V / @ 6A Storage Temperature AC230V / @ 3A Max 0° ~ 75º C (32° ~ 167º F) Switchable Operating Humidity 5% - 95%, non-condensing AC Output: Storage Humidity 5% - 75% AC115V / @ 1A Altitude 10,000 ft (3000m) AC230V / @ 0.5A Max Vibration (operating) 1.5G Max. & 0.1” P-P at 5 to 17.1 Hz Switchable Shock 10G peak acceleration Rated Input Frequency: (10 ms duration) 47 ∼ 63 Hz MTBF 50,000 hours DC Output (Max.): Safety Meets UL, CSA and TUV approval 270 Watt Max. EMI FCC Class A and CE approved +5V @ 30A Note: Specification is subject to change without notice. MiTAC INDUSTRIAL CORP. 41968 Christy St., Fremont, CA 94538, U.S.A. •• TEL: 510-656-5288 •• FAX: 510-656-2669 •• http:// www.mitacinds.com •• •• ••