Manufacturers
MIRCO/SYS SBC1188-ET
Description
MicroSys SBC1188 CPU Board - 80C188 CPU, 12 MHz, 128K RAM, 512K flash, extended temp operation
Part Number
SBC1188-ET
Price
Request Quote
Manufacturer
MIRCO/SYS
Lead Time
Request Quote
Category
PRODUCTS - S
Specifications
Environmental
0° - +70°C operating. -40° - +85°C storage. -40° - +85°C operating, -ET version. 5%-95% relative humidity, non-condensing
External Connections
10-pin headers, both serial ports. 10-pin header for counter/timers. 26-pin header for parallel I/O ports.
Mechanical
PC/104 standard. 3.55" (plus I/O region) x 3.775" x .6"
On-board Memory
128K of static RAM, expandable to 512K. On-board RAM based at 0000:0000. 512K of flash
Parallel Ports
82C55 device with 24 I/O lines. Ports programmable input or output. TTL compatible levels, 2.5mA drive.
PC/104 Interface
8-bit PC/104 module support. IRQ2-IRQ6 and IOCHCHK (NMI). No DMA support.
Power Requirements
+5V ± 5% at 200mA max (12MHz). +5V ± 5% at 250mA max (20MHz)
Processor
Intel 80C188EB
Processor Core Section
80C188EB CPU. 12 or 20 MHz clock rate. Includes three 16-bit timers. Interrupt controller included
Real Time Clock
Optional RTC with on-board battery, RTC support included in BIOS
Serial Ports
Two async serial ports (contact factory about sync mode) RTS and CTS modem controls. 7, 8, or 9-bit operation. Separate programmable baud generators. Not PC software compatible. CommBLOK library available for drivers
Watchdog Timer
Program must refresh watchdog timer periodically, or system will be reset
Features
- 24 TTL compatible I/O lines
- 5V-only CMOS, on-board flash prog
- 80C188EB, 128K RAM, 512K flash
- Download .EXE file to run on card
- Extended temperature range available
- Real time clock, RS485 option
- Small, low cost, ready to run
- Turbo Debugger support
- Two RS232 serial channels
- Watchdog timer, PC/104 expansion
Datasheet
Extracted Text
Low Cost, Turnkey PC/104 Computer SBC1188 Features Small, low cost, ready to run 80C188EB, 128K RAM, 512K flash 24 TTL compatible I/O lines Two RS232 serial channels Watchdog timer, PC/104 expansion Real time clock, RS485 option 5V-only CMOS, on-board flash prog Download .EXE file to run on card ™ Turbo Debugger support Extended temperature range available The SBC1188 is a small, low cost PC/104 format With two serial ports, 24 CMOS I/O lines, three embeddable PC. It offers a range of features counter/timers, and a watchdog timer, the making it ideal for embedded control applica- SBC1188 provides a full set of hardware for tions, and offers quick development cycles. The many applications. If further functionality is standard configuration includes RAM and flash needed, PC/104 expansion cards can be stacked EPROM installed, and the powerful RUN.EXE onto the SBC1188. firmware. This firmware allows an .EXE file to be downloaded into on-board flash EPROM through Because the SBC1188 is completely functional a serial port using XMODEM protocol, and then as shipped, there are no memory parts to specify run the next time power is applied. Borland/ and buy, or other impediments to immediate Microsoft C/C++, Turbo Pascal, and QuickBASIC project development. The SBC1188 is ready to are all supported directly. accept a program to run upon receipt. Software Support Compatible Hardware Mounting/Packaging ™ DOS emulation, RUN.EXE PC/104 expansion cards Enclosure, ENC104-3 ™ Turbo Debugger [Items above in Section 4] Standoffs, STDOFF01 ™ Comm Library, CommBLOK RS232 devices [Items above in Section 5] ™ PID loop library, PidBLOK Custom Custom C, BASIC, compilers [Items above in Section 6] Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com 128K/512K P RAM 82C55 Parallel I/O C 512K / flash 1 EPROM 0 W'dog 80C188EB 4 128K Socket I/ Counter/ O COMA COMB Timers Specifications: Mechanical: On-board Memory: � PC/104 standard � 128K of static RAM, expandable to 512K � 3.55" (plus I/O region) x 3.775" x .6" � On-board RAM based at 0000:0000 � 512K of flash Power Requirements: � Socket for battery-backed RAM or EPROM � +5V ± 5% at 200mA max (12MHz) � +5V ± 5% at 250mA max (20MHz) Serial Ports: Environmental: � Two async serial ports (contact factory � 0° - +70°C operating about sync mode) � -40° - +85°C storage � RTS and CTS modem controls � -40° - +85°C operating, -ET version � 7, 8, or 9-bit operation � 5%-95% relative humidity, non-condensing � Separate programmable baud generators � Not PC software compatible. CommBLOK Processor Core Section: library available for drivers � 80C188EB CPU � 12 or 20 MHz clock rate Real Time Clock: � Includes three 16-bit timers � Optional RTC with on-board battery � Interrupt controller included � RTC support included in BIOS Watchdog Timer: � Program must refresh watchdog timer periodically, or system will be reset Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com J3 COM-A and J2 COM-B J4 Parallel I/O Serial Port Connector/Cable Connector J2/J3 Pin RS232 DB9 Pin J4 Pin Signal 11 1PA0 26 2PA1 3RX Data In 2 3PA2 4RTS Out 4PA3 7 5 TX Data Out 3 5 PA4 6CTS In 8 6PA5 7 4 7 PA6 8 PA7 89 9GND 5 9PB0 10 10 PB1 11 PB2 12 PB3 PC/104 Interface: 13 PB4 � 8-bit PC/104 module support 14 PB5 � IRQ2-IRQ6 and IOCHCHK (NMI) 15 PB6 � No DMA support 16 PB7 17 PC0 Parallel Ports: 18 PC1 � 82C55 device with 24 I/O lines � Ports programmable input or output 19 PC2 � TTL compatible levels, 2.5mA drive 20 PC3 21 PC4 22 PC5 J5 Timer/Misc 23 PC6 Connector 24 PC7 Pin Signal 25 GND 1 Timer 0 In 26 GND 2Timer 0 Out 3 Timer 1 In 4 Timer 1 Out DK1188 Development Kit: 5 P2.2 Line � Free with first SBC1188 purchase � BIOS and DOS compatible O/S 6 P2.7 Line � “Implied AUTOEXEC.BAT” on reset 7 GND � Directly executes programs written in C/ 8 P1.6 Line (red LED on/off) C++, Pascal, BASIC � No modified libraries or locator utilities � Executes .EXE file from flash External Connections: � Includes Turbo Debugger remote support � 10-pin headers, both serial ports � Download program to flash EPROM with � 10-pin header for counter/timers XMODEM (using PROCOMM, etc.) � 26-pin header for parallel I/O ports Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com Ordering Information: Single Board Computer: SBC1188 80C188 CPU, 12 MHz, 128K RAM, 512K flash SBC1188-20 Complete CPU, 20MHz SBC1188-ET 80C188 CPU, 12 MHz, 128K RAM, 512K flash, extended temp operation SBC1188-20-ET Complete CPU, 20MHz, extended temp operation DK1188 Development kit, no charge with first order only 1188OPT1 Battery-back Clock 1188OPT3 512K static RAM upgrade 1188OPT6 Clock and 32K RAM, Battery-backed 1188OPT7 Clock and 128K RAM, Battery-backed 1188OPT8 RS485/RS232 COM A Add -ET to option for extended temp operation Accessories: MPCxxx All Micro/sys PC/104 cards CA4020 RS232/RS485 cable to male 9-pin D connector ENC104-3 Metal enclosure for SBC1188 plus 3 PC/104 add-ons Cables nominally 15", other lengths available RUN.EXE trademark Micro/sys, Inc. PidBLOK, NetBLOK trademark Drumlin IBM, PC trademark IBM Corp. MSDOS, QuickBASIC, Microsoft trademark Microsoft Corp. Turbo Pascal, Turbo Debugger trademark Borland International Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SBC1188-ET have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Micro/Sys SBC1188 CPU, 12 MHz, 128K RAM, 512K flash
MicroSys SBC1188-20 Complete CPU - 20MHz
Micro/Sys SBC1188 Complete CPU, 20MHz, extended temp operation
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods