MOV501 1/20 to 2 HP scr dc chassis, neMa 1, neMa 4X A Field Input Output Max HP Rating HP Rating @ Rev- Supply Form Drive Voltage Voltage Current @ 90 VDC 180 VDC Enclosure ersing Isolation UL CUL CE (VDC) Factor (VAC) (VDC) (ADC) Output Output ***** U U **** CC R R L L US LISTED US LISTED ®® MM23011C 115/230 0-90 / 0-180 1.5 1/20 - 1/8 1/10 - 1/4 Chassis – *** YES 1.37 YES YES YES MM23111C 115/230 0-90 / 0-180 1/20 - 1/8 1/10 - 1/4 NEMA 1 – *** YES 1.37 YES YES YES 1.5 MM23211C 115/230 0-90 / 0-180 1/20 - 1/8 1/10 - 1/4 NEMA 1 YES *** YES 1.37 YES YES YES 1.5 MM23411C 115/230 0-90 / 0-180 1/20 - 1/8 1/10 - 1/4 NEMA 4X – *** YES 1.37 YES YES YES 1.5 MM23001C 115/230 0-90 / 0-180 10* 1/8 - 1 1/4-2 Chassis – *** YES 1.37 YES YES YES MM23101C 115/230 0-90 / 0-180 10** 1/8 - 1 1/4-2 NEMA 1 – *** YES 1.37 YES YES YES MM23201C 115/230 0-90 / 0-180 10** 1/8 - 1 1/4-2 NEMA 1 YES *** YES 1.37 YES YES YES MM23401C 115/230 0-90 / 0-180 10 1/8 - 1 1/4-2 NEMA 4X – *** YES 1.37 YES YES YES * Heatsink number 223-0159 must be used when the output is above 5 Amps. ** Heatsink number 223-0174 must be used when the output is above 5 Amps. *** Built in isolation is not available on the MM23000C family of drives. Minarik Drives recommends using the PCM23001A (Pg 8), MM-PCM (Pg 10), MM300 Series (Pg 9), or PCM4 (Pg 45). **** The field supply is rated at 1 Amp DC. A 50/100 VDC field is available with 115 VAC input, and a 100/200 VDC field is available with 230 VAC input. ***** Reversing models are designed for occasional reversing and braking using the switches on the enclosure. See Regenerative drives in Section C for drives that can reverse on-the-fly or for drives with the ability to remote mount direction and braking switches. MM230x1c diMensions The MM23000C Series of drives are a reliable and cost-effective solution for controlling your permanent magnet or shunt-wound DC motors in variable-speed SCR501 D501 D502 D503 SCR502 A2 L1 applications. The MM23000C series uses SCRs to pro- 0.19 [5] F2 vide full-wave rectification of the AC line input. These F1 C501 dual voltage drives operate using 115 VAC or 230 VAC, MOV503 SW501 L2 50/60 Hz, to run 90 or 180 VDC SCR brush-type mo- A1 3.58 [91] 115 230 1.75 [44] tors. These drives control motors from 1/20 to 2 HP C502 IC501 S2 C504 and come in chassis, NEMA 1, and NEMA 4X models. CL 90 180 INHIBIT SW502 IL501 S3 S1 Cased models include AC line fuses. 0.74 [19] 0.64 [16] ACCEL DECEL MAX SPD MIN SPD TORQUE IR COMP See page 50 for an in-depth comparison of the differ- 3.80 [97] ent models of drives. 4.30 [109] Height: 1.60 [41] All dimensions in inches [millimeters] Dimensions of drives not shown above can be found on page 54. Wiring diagrams of chassis drives can be found on page 59 and 68. featUres • MM footprint: Chassis drives have a compact industry standard footprint. • Speed range and regulation: 1% regulation over 60:1 speed range. MM23001C MM23101C MM23011C MM23111C • User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration. • Diagnostic LED: LED for current limit status on all models. Cased models have a green power light. • Stopping Modes: Inhibit (N/O) for coasting to a stop on all models. Dynamic braking included on MM232x1C. • Spade and screw terminals: Easy to use spade terminals on chassis; screw terminals on enclosed units. • Options: “-Q” option on chassis drives include quick disconnect terminal block and power LED. • Accessories: Heatsink 223-0159 or 223-0174. 201-0024 inhibit plug with 18” leads, DLC600 digital closed loop controller, PCM4 isolation card. MM23201C MM23401C MM23211C MM23411C 4  • MM23000C SERIES Call us toll free 1.800.MINARIK or find more information online at www.minarikdrives.com MOV502 R502 C503 R501 IC502