Low Cost Analog and Microcontroller Tools Low Cost Development Tools Guide For use with Analog and Interface Products, 8- and 16-bit ® ® PIC Microcontrollers, dsPIC Digital Signal Controllers, ® Memory and KEELOQ Products. Microchip offers a broad spectrum of development Getting Started Products tools – all designed to help you achieve faster time ™ PICDEM HPC Explorer Board to market. For a complete listing of Microchip Part Number: DM183022 products and their corresponding users guides, This low-cost demo board is used to evaluate data sheets and technical information, visit our the performance of high-end 8-bit PIC18F web site – www.microchip.com. series. The board features a PIC18F8722 microcontroller, which is the superset of the entire 64- and 80-pin PIC18FXXXX general purpose family. A daughter board (mezzanine) is also part of the kit and allows different processors January 2006 sharing the same pin out to be mounted and tested on the explorer board. Getting Started Products.............................................1-2 Explorer 16 Development Board Part Number: DM240001 Linear Products.............................................................. 2 The Explorer 16 is a low-cost, efficient Interface Products.......................................................2-4 development board to evaluate the features and performance of Microchip’s new 16-bit PIC24 Microcontroller and dsPIC33 Digital Mixed Signal Products ................................................4-5 Signal Controller (DSC) families. Coupled ® with the MPLAB ICD 2 In-Circuit Debugger, Power Management Products.....................................5-7 real-time emulation and debug facilities speed evaluation and prototyping of application circuitry. The board features two Thermal Management Products..................................7-8 interchangeable Plug-In Modules (PIMs), one each for the PIC24FJ128GA010 and the dsPIC33F128GP710 DSC. ® ® PIC Microcontroller and dsPIC Digital ™ Signal Controller Demonstration Boards..................8-9 PICkit 1 Flash Starter Kit Part Number: DV164101 Analog Blank Evaluation PCBs...................................... 9 A low-cost starter development kit with an easy-to-use interface for Programmers ................................................................. 9 programming Microchip’s 8-/14-pin Flash ® PIC microcontrollers. The kit includes Analog Software Tools ................................................... 9 everything needed to program, evaluate and develop applications. Seven tutorials with all source code files are furnished. Microcontroller Software Tools..................................9-10 ™ PICkit 2 Starter Kit ® dsPIC Digital Signal Controller Part Number: DV164120 Evaluation Software Tools......................................... 10 PICkit 2 is small, easy to use programmer/ starter kit that enables users to start Low Cost Tool and Product Cross ® writing code and programming with PIC Reference Table ........................................................ 11 microcontrollers. Features full speed USB support and firmware upgradeability in a low-cost tool. Low Cost Analog and Microcontroller Tools ™ PICkit 2 Low Pin Count Demonstration Board Linear Products Part Number: DM164120-1 ™ MCP6S22 PGA PICtail Demonstration Board A small demo board with a PIC16F690 on Part Number: MCP6S22DM-PICTL board and a small prototype area. Use with the PICkit 2 to program code via a 6-pin This board evaluates/demonstrates ICSP™ header on the board. The kit also Microchip’s MCP6S21/2/6/8 Programmable includes two bare PCB boards for those Gain Amplifier (PGA) family. Interface this interested in customizing their development. board with the PICkit™ 1 Flash Starter Kit to demonstrate firmware integration between the ™ Signal Analysis PICtail Daughter Board ® PIC microcontroller and PGA devices, while allowing modification Part Number: AC164120 and development of firmware for specific requirements. This board works as an extension to the MCP6S2X PGA Evaluation Board PICkit™ 1 Flash Starter Kit. When combined Part Number: MCP6S2XEV with PICkit 1 firmware version 2.0.0 or later and the signal-analysis PC program, the Provides a versatile selection of input board performs signal-analysis capabilities channels and gains to evaluate device such as: real-time strip chart, oscilloscope, performance. Board supports multiple Fast Fourier Transformation (FFT), histogram and programming. input signal sources. Two devices can be The board comes populated with a PIC16F684 and two 25LC640 cascaded to produce gain to 1024 V/V. SPI-compatible serial EEPROM memory devices. ™ MCP6SX2 PGA Photodiode PICtail PIC10F 6L SOT-23 to 8P DIP Adapter Kit Demonstration Board Part Number: AC163021 Part Number: MCP6SX2DM-PCTLPD This is a kit consisting of (5) PIC10F206 Opens possibilities to process other sensor ® SOT-23 devices, (5) pin scramble boards signals. Increases the number of PIC and DIP pins. Once assembled, this makes microcontroller I/O pins available for other the SOT-23 look like a standard 8-pin purposes. Features a PNZ334 photo-diode, DIP and can be used directly in standard MCP6001U op amp, and MCP6S22 and development tool sockets. This kit should be MCP6S92 Programmable Gain Amplifiers (PGA). used only for early evaluation. ™ MCP6SX2 PGA Thermistor PICtail ® SEEVAL 32 Serial EEPROM Evaluation Kit Demonstration Board Part Number: DV243002 Part Number: MCP6SX2DM-PCTLTH An evaluation and programming system supporting all Microchip Features MCP6S22 and MCP6S92 PGAs. Serial EEPROMS including future devices. Using a ZIF socket, Helps overcome non-linear response of the standard DIP sockets are directly supported. The SEEVAL 32 on-board NTC thermistor. Opens possibilities gives the designer the ability to read, write, or erase any byte, of temperature-correcting another sensor, page or entire array, and to display, save or load this data as a ® and increasing the number of PIC microcontroller I/O pins ® file. SEEVAL 32 provides support for Windows XP, Windows available for other purposes. ME, Windows 2000, Windows NT 4.0 and Windows 95/98. ® Interface Products KEELOQ Evaluation Kit II Part Number: DM303006 ™ PICDEM CAN-LIN 1, 2 and 3 Demonstration Boards This kit demonstrates the capabilities of the Part Number: DM163007, DM163011, code-hopping technology used in security DM163015 systems such as garage door openers, Microchip offers three similar PICDEM auto keyless entry, etc. for secure access CAN-LIN Demo Boards to support different and/or authentication. It includes a main board and 2 transmitters ® PIC microcontrollers. All demonstrate the to demonstrate encoders and decoders. The fully functional kit main features of the devices, especially allows a short learning cycle into the technology. those features of the integrated CAN module. The board also employs a LIN sub-network using the PIC16C43X and PIC18F320 device families. PICDEM CAN-LIN 1 supports: 68-pin PLCC PIC18C658, 84-pin PLCC PIC18C858 devices and 20-pin PDIP PIC16C432 with integrated LIN Bus transceiver PICDEM CAN-LIN 2 supports: 28-pin SDIP PIC18F258 and PIC18F2680 devices, 40-pin PDIP PIC18F458 and PIC18F4680 devices and 20-pin PDIP PIC16C432 with integrated LIN Bus transceiver PICDEM CAN-LIN 3 supports: 64-pin TQFP PIC18F6680, 80-pin TQFP PIC18F8680 devices, 20-pin SSOP PIC18F1320 and MCP201 LIN Bus transceiver 2 Low Cost Analog and Microcontroller Tools ™ PICDEM LCD Demonstration Board rfPICkit Development Kit 1 Part Number: DM163028 Part Number: DV164102 Demonstrates the main features of the Provides design engineers with an easy ® LCD Flash 28-, 40-, 64- and 80-pin PIC way to evaluate unidirectional remote sense microcontrollers with power management and control wireless links based on the features. The board is populated with the rfPIC12F675 and rfRXD0420/0920 devices. PIC18F8490 and other devices are supported The kit is based on the PICkit™ 1 Flash via a transition socket. A sample LCD glass display is included Starter Kit and consists of modular building blocks for different for custom prototyping. The PICDEM LCD kit provides tutorial transmitters and receivers that can be utilized for prototype firmware, which is included in the preprogrammed devices. systems or to evaluate different options. ™ PICDEM LCD Daughter Boards rfPICkit Development Kit 1 Accessories ® Part Number: MA160011 rfPIC Transmitter Module (433.92 MHz) Part Number: AC164101 For use with the PICDEM LCD Demonstration Board listed ® rfPIC Transmitter Module (315 MHz) above. Part Number: AC164102 ™ PICDEM FS USB Demonstration/ ® rfPIC Receiver Module (433.92 MHz) Evaluation Board Part Number: AC164103 Part Number: DM163025 ® rfPIC Receiver Module (315 MHz) Part Number: AC164104 Demonstrates and evaluates the PIC18F4550 family of Flash microcontrollers ® rfPIC Receiver Module 5 pack (433.92 MHz) with full speed USB 2.0 interface. The board Part Number: AC164105 contains a PIC18F4550 microcontroller in ® rfPIC Receiver Module 5 pack (315 MHz) a 44-pin TQFP package, representing the Part Number: AC164106 superset of the entire family of devices. ® MCP2140 IrDA Wireless Temp ™ PICDEM USB Demonstration Board Demonstration Board Part Number: DM163010 Part Number: MCP2140DM-TMPSNS Demonstrates the PIC16C745 and Demonstrates the MCP2140 device in a real- PIC16C765 USB microcontrollers world application. This design is an example communicating to a PC using the USB port. of how to integrate an IrDA standard port into a system. PICDEM™ MSC1 Infrared (IR) Driver Daughter Board MCP212X Developer’s Daughter Board Part Number: AC163002 Part Number: MCP212XEV-DB This board, in combination with the PICDEM MSC1 Demo Board, Evaluates and demonstrates the MCP2122 or serves as a demonstration and evaluation kit for designing a high ® MCP2120 IrDA Standard Encoder/Decoder power IR remote control transmitter using the PIC16C782. The devices. A header allows the MCP212X daughter board, in combination with the included IR receiver, Daughter Board to be easily jumpered into implements both receive and transmit sections of a Pulse Width systems for development purposes. This board Modulation (PWM) IR remote control system. ® also interfaces with these new low-cost PIC microcontroller demo boards: PICDEM™ HPC Explorer, PICDEM ™ PICDEM Z Demonstration Kit FS USB and PICDEM LCD Demo Board. Part Number: DM163027-2 MCP2120/2150 Infrared Developer’s Kit An easy-to-use ZigBee™ Technology wireless communication protocol development and Part Number: DM163008 demonstration platform. The kit includes the Includes everything needed to create a ZigBee protocol stack and two PICDEM Z system that communicates using infrared. boards, each with an RF daughter card. The The kit contains two MCP2120 developer’s demonstration board is also equipped with a boards enabling a complete system 6-pin modular connector to interface directly (transmitter and receiver) to be implemented, ® with MPLAB ICD 2. and a MCP2150 developer’s board that can be used to set up a system to communicate with other IrDA enabled devices. 3 Low Cost Analog and Microcontroller Tools MCP215X Data Logger Demonstration Board Mixed Signal Products Part Number: MCP215XDM ® MCP3XXX Single/Dual ADC MXDEV Demonstrates the MCP2150 (or MCP2155) Daughter Board IrDA Standard Protocol Stack Controller Part Number: DV3201A device in a real world application. Shows how to integrate an IrDA standard Supports MCP3001, MCP3002, MCP3201 port into an embedded system. and MCP3202 stand-alone A/D converters. Used with the MXDEV Driver Board MCP215X/40 Developer’s Daughter Board (available separately). Part Number: MCP215X/40EV-DB ® MCP3204/08 MXDEV Daughter Board Used to evaluate and demonstrate the MCP2150, MCP2155 or ® the MCP2140 IrDA Standard Protocol Handler with Encoder/ Part Number: DV3204A Decoder devices. Headers allow the MCP215X/40 Developer’s Supports MCP3004, MCP3008, MCP3204 Daughter Board to be easily jumpered into systems for and MCP3208 stand-alone A/D converters. development purposes. This board also interfaces with these new Used with the MXDEV Driver Board (available ® low-cost PIC microcontroller demo boards: PICDEM™ HPC separately). Explorer, PICDEM FS USB and PICDEM LCD Demo Board. ™ MCP3221 12-bit A/D PICtail MCP23X08 8-bit GPIO Expander Demonstration Board Evaluation Board Part Number: MCP3221DM-PCTL Part Number: MCP23X08EV Designed to demonstrate the MCP3221 device Demonstrates simple input/output functionality using DataView™ Windows software for a 2 of the MCP23008 (I C™ interface) and the graphical real time data analysis from the board MCP23S08 (SPI interface). The system through USB. This demo board can also be demonstrates the simplicity of monitoring four used for firmware development to the MCP3221 inputs and applying the level to associated device using the PICkit™ 1 Flash Starter Kit. outputs. MCP3551 Delta-Sigma ADC Demonstration MCP250XX CAN I/O Expander Developer’s Kit Board Part Number: DV250501 Part Number: MCP3551DM-PCTL Supporting CAN V2.0B active with bus rates up to 1 Mb/s, this kit includes everything needed Designed to demonstrate the MCP3551 device’s to demonstrate, design, develop and configure 22-bit Delta-Sigma Analog-to-Digital (ADC) a CAN node using the MCP250XX CAN I/O Converter performance using DataView™ software Expander family of products. installed on a PC. This demo board can be used ® with MPLAB ICD 2, PICkit™ 1 Flash Starter Kit, or PICkit™ 2 for developing demonstration/evaluation MCP2510/2515 CAN Developer’s Kit firmware. Part Number: DV251001 MCP3905 Energy Meter Evaluation Board To speed up software development and enable Part Number: MCP3905EV introduction of CAN to those who are unfamiliar with the protocol, Microchip offers a unique This evaluation board is designed to test out a variety of energy combination of a software development tool and meter designs. On the input side high voltage line and load AC- a CAN message/communication tool called the plug headers are included, along with mounting holes for shunts, MCP2515/2510 CAN Developer’s Kit. current transformers and screw-type connections for wiring. On the output side a large prototype area is included along with ™ MCP2515 CAN Controller PICtail optical isolation and a standard PICtail™ header for experiments ® Demonstration Board with a variety of PIC microcontroller based energy meter Part Number: MCP2515DM-PCTL designs. This demo board implements a simple CAN bus using two MCP3905 Energy Meter Reference Design nodes. One using the MCP2515 Stand Alone CAN controller Part Number: MCP3905RD-PM1 and the other using the MCP25020 CAN I/O Expander. Each node utilizes one input (push button) and one output (LED). The A stand-alone low-cost energy meter that can act as either a boards demonstrate a simple, inexpensive implementation of a stand alone energy meter, or as the analog front end design CAN bus. for LCD microcontroller based meters. This design is specified with an energy measurement error of 0.1% typical across 1:500 dynamic range for high accurate energy meter designs and is compliant with EMC requirements per energy metering standards IEC62053 and legacy IEC61036, IEC1046 and IEC687. 4 Low Cost Analog and Microcontroller Tools MCP402X Non-Volatile Digital Potentiometer Power Management Products Evaluation Board MCP1252 Charge Pump Backlight Part Number: MCP402XEV Demonstration Board This low-cost board enables user’s to exercise Part Number: MCP1252DM-BKLT all of the features of the MCP401X and MCP402X devices. Kit includes one populated Demonstrates the use of a charge pump and one unpopulated PCB. The populated device in an LED application and acts as a board has an MCP4021-103E/SN digital pot platform to evaluate the MCP1252 device configured as a “windowed” potentiometer in general. Light intensity is controlled using a 2.5 kΩ pull-up and a 2.5 kΩ pull-down resistor. The PCB uniformly through the use of ballast supports the 8-pin SOIC, SOT-23-6 and SOT-23-5 package resistors. A PIC10F206 MCU provides an enable signal to the variations. The unpopulated PCB allows user’s to build the exact MCP1252 and accepts a push-button input that allows the white combination of components their application requires. LEDs to be adjusted to five different light intensities. MCP42XXX Digital Pot Evaluation Board MCP1601 Buck Regulator Evaluation Board Part Number: DV42XXX Part Number: MCP1601EV Includes an evaluation board, prototype For both battery-powered and distributed- board, RS-232 cable, 9V DC power supply, power applications. Operates over a 2.7V to ® MXLAB software, digital potentiometers 5.5V input range while delivering 500 mA of ® and PIC microcontroller. Used with the output current. ® MXDEV Driver Board (available separately). MCP1612 Synchronous Buck Regulator Evaluation Board Mixed-Signal PICtail™ Demonstration Board Part Number: MCP1612EV Part Number: MXSIGDM Features a 1A 1.4 MHz synchronous buck Quickly and accurately evaluates performance of Microchip regulator in two buck converter applications. The DACs, A/D converters, LDOs, VREFs and operational amplifiers. applications use the 8-lead MSOP and 8-lead Interfaces to the PICkit™ 1 Flash Starter Kit. Can use with a DFN packages respectively. Selectable output PIC16F767 for stand-alone operation. Supports many voltages and a shutdown terminal are available Microchip mixed-signal devices (surface mount footprint). on each converter. ® MXDEV Analog Evaluation System Part Number: DVMCPA MCP1630 +12V in Dual Output Buck Converter Versatile, easy-to-use system helps evaluate Reference Design mixed-signal products. Includes the DVMCPA MCP Driver Board, which provides data Part Number: MCP1630RD-DDBK1 acquisition and analysis/display in a Windows This demo board is a dual output environment. programmable power supply capable of 20A per output. Both outputs switch at 500 PICDEM™ MSC1 Delta-Sigma ADC kHz 180° out of phase while powered from Daughter Board a +12V-input source. Features include Part Number: AC163003 programmable output voltage, power good output indication, sequencing, over current In combination with the PICDEM MSC1 Demo Board, this board and over temperature. serves as a demonstration and evaluation kit for designing high resolution Delta Sigma Analog-to-Digital Converters using the MCP1630 1A Bias Supply Demonstration Board PIC16C781/782. Part Number: MCP1630DM-DDBK1 PICDEM™ MSC1 Flow Rate Sensor This demo board is used to evaluate Microchip’s MCP1630 used in a SEPIC power Daughter Board converter application. The demo board is Part Number: AC163004 capable of providing a regulated output from This board, in combination with the PICDEM MSC1 Demo Board, an input voltage of 9V. The regulated output is a complete demonstration kit for a high sensitivity hot-wire voltage is selectable at 3.3V or 5V and remains anemometer-styled fl ow rate sensor using the PIC16C782. constant for an output load range of 0A to 1A. An LED indicates the presence of output voltage. ™ PICDEM MSC1 Mixed Signal Controller Demonstration Board Part Number: DM163012 The PICDEM MSC1 with its PC-based Graphical User Interface (GUI) software serves as a stand-alone development and evaluation tool for the PIC16C781/782 microcontrollers, or as a user interface to the peripherals. 5 Low Cost Analog and Microcontroller Tools MCP1630 Li-Ion Multi Bay Battery Charger MCP1650 SEPIC Power Supply Reference Design Demonstration Board Part Number: MCP1630RD-LIC1 Part Number: MCP1650DM-DDSC1 Used to evaluate the MCP1630 used in a Used to evaluate Microchip’s MCP1650 SEPIC power converter application. This boost controller in a low power application charger is capable of charging two single-cell, that requires a regulated output voltage from Li-Ion battery packs in parallel utilizing an input an input source that can be greater than, voltage of 10V to 30V (battery packs are not less than or equal to the output voltage. As included). provided, this board generates a 5.0V output from a 3.0V to 7.0V source. MCP1630 Low Cost Li-Ion Battery Charger MCP1726 1A LDO Evaluation Board Reference Design Part Number: MCP1726EV Part Number: MCP1630RD-LIC2 This board features 1A, Low Quiescent This board is used to evaluate the MCP1630 Current LDO Regulator in two circuits. The device used in a SEPIC power converter circuits feature adjustable versions of the applications. The charger is capable of MCP1726 in the 8-pin 3X3 DFN and 8-pin charging a single-cell, Li-Ion battery pack SOIC packages respectively. Both circuits utilizing an input voltage of 6V to 18V (battery have potentiometers to adjust the output packs are not included). voltage of the LDO. Fixed voltage versions MCP1630 NiMH Battery Charger of the device can also be evaluated with this board. Demonstration Board Part Number: MCP1630DM-NMC1 MCP7382X Li-Ion Battery Charger High-speed PWM interfaces to PIC16LF818, Evaluation Board providing a complete NiMH battery charger Part Number: MCP7382XEV with fuel gauge capability. Minimizes external Three circuits utilizing the MCP73826, inductor, capacitor cost; performs complex MCP73827 and MCP73828 devices to NiMH battery charger timing functions. demonstrate simple, stand-alone, linear Protects battery circuit if a fault occurs. charging of single cell Lithium-Ion/Lithium- MCP1650 3W White LED Demonstration Board Polymer battery packs (the battery packs are not included). Part Number: MCP1650DM-LED1 Demonstrates the MCP165X Boost Controller MCP73831 Evaluation Kit product family in a battery-powered white LED Part Number: MCP73831EV application with an input voltage range of 2.0V to The two evaluation boards provided are set up to evaluate 4.5V. simple, stand-alone, linear charging of single cell Li-Ion/Li- Polymer battery packs (the battery packs are not included). Each board design provides constant current charging followed by MCP1650 Multiple White LED constant voltage charging with automatic charge termination. In addition, the MCP73831-2AC board provides preconditioning of Demonstration Board deeply depleted cells. Each board design provides evaluation in Part Number: MCP1650DM-LED2 two package options: a SOT23-5 and a 2 mm x 3 mm, 8-lead The MCP1650 Multiple White LED Demo Board uses the DFN for higher power handling capability. MCP1650 IC to power the nine white LEDs which are connected in series. A PIC10F202 microcontroller in a SOT-23 6 pin MCP7384X Li-Ion Battery Charger package is used to provide the PWM signal to the MCP1650. It Evaluation Board also accepts a push button input that allows the user to adjust the Part Number: MCP7384XEV white LEDs to three different intensities of 100%, 50% and 25%. Three circuits use MCP73841, MCP73842 MCP1650 Boost Controller Evaluation Board and MCP73843 devices to demonstrate Part Number: MCP1650EV simple, stand-alone, linear charging of single- or dual-cell, Lithium-Ion/Lithium- Demonstrates the MCP165X Boost Controller Polymer battery packs (battery packs are not product family in two high-power, boost- included). converter applications. 6 Low Cost Analog and Microcontroller Tools ™ MCP73855 Li-Ion Battery Charger PICDEM Low Power Solutions Evaluation Board Demonstration Board Part Number: MCP73855EV Part Number: DM163026 ® Use to evaluate simple, stand-alone, linear This board explores PICmicro nanoWatt charging of single cell Li-Ion/Li-Polymer features within a functional ultrasonic battery packs (the battery packs are not range-finder application. It features the included). The board design provides PIC18F4620 power managed device. constant current charging followed by constant voltage charging with automatic PICDEM™ MSC1 Switch Mode Power Supply charge termination. (SMPS) Daughter Board Part Number: AC163001 MCP7386X Li-Ion Battery Charger In combination with the PICDEM MSC1 Demo Board, this board is Evaluation Board a complete demonstration and evaluation kit for designing switch Part Number: MCP7386XEV mode power supplies using the PIC16C781/782. The daughter Use to evaluate simple, stand-alone, linear board can be confi gured for the following switch mode power charging of single/dual cell Lithium-Ion/ supply topologies: Boost: output voltage greater than the supply Lithium-Polymer battery packs (the battery voltage, Buck: output voltage less than the supply voltage, Buck- packs are not included). The board design Boost: output voltage less than or greater than the supply voltage provides constant current charging followed and Invert: negative output voltages. by constant voltage charging with automatic charge termination. Thermal Management Products TC115 PFM/PWM Boost Converter MCP9700 Temperature-to-Voltage Converter Evaluation Board ™ PICtail Demonstration Board Part Number: TC115EV Part Number: MCP9700DM-PCTL A complete, step-up, switch-mode, dc-dc This board demonstrates how to interface the power converter. This board generates a MCP9700 to a microcontroller. This can be used regulated 3.0V output at load currents up by the system designer as an example of how to 110 mA. Different output voltages are to integrate an analog temperature sensor into obtainable by replacing the fixed 3.0V output systems. TC115 with a fixed 3.3V or 5.0V device. Requires the use of an external input voltage ™ MCP9800 Temperature Sensor PICtail source (0.9V – VOUT). The board is provided with an aluminum Demonstration Board electrolytic output capacitor with additional surface-mount pads to evaluate tantalum or ceramic capacitors. Part Number: MCP9800DM-PCTL Demonstrates how to interface the TC1016/17 LDO Linear Regulator ® MCP9800 to a PIC microcontroller using Evaluation Board the PICkit™ 1 Flash Starter Kit as a Part Number: TC1016/17EV platform. The demo board can also be used as a stand-alone module to quickly add This evaluation board contains two thermal sensing capability to any existing independent LDO circuits that allow the user application. to evaluate the TC1016 (80 mA) and TC1017 (50 mA) devices in 5-pin SC-70 and 5-pin MCP9800 Temperature Data Logger SOT-23 packages. The evaluation board Demonstration Board is populated with 1.8V and 3.0V TC1017 devices. Any of the available output voltage values of the devices Part Number: MCP9800DM-DL (1.2V to 5.0V) can be used on this board. Allows users to store up to 128000 temperature readings from the MCP9800 sensor to the 24LC1025, Microchip’s 1024 Kbit TC1303B Demonstration Board EEPROM. A PIC16F684 microcontroller communicates with Part Number: TC1303BDM-DDBK1 ® the sensor and EEPROM. In addition, the PIC microcontroller The TC1303B Dual-Output Regulator with interfaces to a PC using the PICkit™ 1 Flash Starter Kit and Power-Good Output Demo Board can be used transfers the temperature readings from the EEPROM to the PC. to evaluate the TC1303B device over the input Microsoft Excel can be used to view the data. voltage range and output current range for both ™ the synchronous buck regulator output and the TC72 Digital Temperature Sensor PICtail low-dropout linear regulator output. Test points Demonstration Board are provided for input power, output loads, Part Number: TC72DM-PICTL shutdown control and power-good monitoring. Connects directly to the PICkit™ 1 Flash Starter Kit. Highly accurate board features a 10-bit digital sensor with 3-wire SPI interface. 7 Low Cost Analog and Microcontroller Tools ® TC74 Serial Digital Thermal Sensor PIC Microcontroller and Demonstration Board ® dsPIC Digital Signal Controller Part Number: TC74DEMO Demonstration Boards Particularly suited for low-cost, small form factor applications. Connects directly to the PICkit™ 1 Flash ™ dsPICDEM 28-Pin Starter Demonstration Board Starter Kit. Part Number: DM300017 This low-cost board allows users to easily ™ TC77 Thermal Sensor PICtail validate a development tool setup using a 28- pin SDIP or SOIC dsPIC30F device. The board Demonstration Board has a socketed dsPIC30F2010 digital signal Part Number: TC77DM-PICTL controller, power supply regulator, crystal System designers can use this design as an oscillator, ICD header, serial port, power on indicator, reset push- example of how to integrate a digital temperature button, 28L SOIC layout pad and a prototyping area. sensor into their systems. Connects directly to the PICkit™ 1 Flash Starter Kit. ™ dsPICDEM 80-Pin Starter Development Board Part Number: DM300019 This board offers an economical way to TC64X/64XB Fan Speed Controller evaluate both the dsPIC30F and dsPIC33F Demonstration Board general purpose and motor control family of Part Number: TC642DEMO devices. An ideal prototyping tool to help Fan control module allows users to quickly quickly develop and validate key design prototype fan control circuits based on the requirements. dsPIC30F6014A and dsPIC33F TC642 or TC646 PWM Fan Control ICs. It Plug-In Modules are included. uses through hole components for easy user ™ dsPICDEM 2 Demonstration Board assembly and evaluation. Part Number: DM300018 TC64X/64XB Fan Speed Controller A development and evaluation tool to help create Evaluation Board embedded applications using dsPIC30F DSCs. Part Number: TC642EV Sockets are provided for 28- and 40-pin devices in the motor control family and 18-, 28- and 40-pin This is a complete evaluation board for evaluation and prototyping devices in the general purpose and sensor family. brushless DC fan control circuits using the TC642, TC646, TC647, TC648 and TC649 BDC fan controllers ™ PICDEM 1 Demonstration Board TC650 Fan Controller Demonstration Board Part Number: DM163001 Part Number: TC650DEMO This kit demonstrates the capabilities of Allows users to quickly prototype fan control the PIC16C5X, PIC16C7XX, PIC16X8X circuits based on the TC650 or TC651 PWM Fan and PIC17C4X families. It can be used Control ICs. stand-alone with a programmed part, or ® with an emulator system, such as MPLAB ICE 2000. Sample TC652 Fan Controller Demonstration Board programs are provided to demonstrate the unique features of the Part Number: TC652DEMO supported devices. Allows users to quickly prototype fan control ™ PICDEM 2 Plus Demonstration Board circuits on TC652 or TC653 PWM Fan Control Part Number: DM163022 ICs. The board can interface with virtually any brushless DC fan. A simple board that demonstrates the capabilities of the 18-, 28- and 40-pin TC1047A Temperature-to-Voltage Converter PIC16XXXX and PIC18XXXX devices. It can be used stand-alone with a programmed part, PICtail™ Demonstration Board ® with MPLAB ICE or with MPLAB ICD 2. Part Number: TC1047ADM-PICTL Demonstrates how to interface the TC1047A ™ PICDEM 3 Demonstration Board device to a microcontroller. Connects directly Part Number: DM163003 to the PICkit™ 1 Flash Starter Kit, providing a This board allows users to quickly become platform for code development and evaluation. familiar with PIC16C9XX products. The software Provides a good example of how to integrate an provided for the LCD Software Demultiplexer analog temperature sensor into a system. runs under Microsoft Windows. . 8 Low Cost Analog and Microcontroller Tools ™ PICDEM 4 Demonstration Board Programmers Part Number: DM163014 ® MPLAB ICD 2 Debugger/Programmer A demonstration and evaluation board for Part Number: DV164005 the 8-, 14- and 18-pin general purpose products with power management features. A low-cost, all-in-one real-time debugger/ ® It comes with two pre-programmed Flash- programmer solution for selected PIC based microcontrollers, the PIC18F1320 and microcontrollers. Programs can be downloaded, PIC16F627A, which both feature nanoWatt executed in real time and examined in detail Technology. using the proprietary debug functions of MPLAB IDE. Watch variables and breakpoints can be set from symbolic ™ PICDEM Mechatronics Demonstration Board labels in C or assembly source code, and single stepping can Part Number: DM163029 be done through C source line, assembly code level, or from a mixed C source and generated assembly level listing. MPLAB ® Learn how to use PIC microcontrollers to ICD 2 can also be used as a development programmer for enhance or replace a mechanical design. supported devices. This demo kit takes a hands-on approach to learning about mechatronics. Jumper PIC10F2XX Programmer Adapter wires are provided in the kit and allow the Part Number: AC163020 user to experiment by connecting the PIC microcontroller to various components on the board. These The PIC10F2XX Universal Programmer components include sensors, LEDs, human input devices and Adapter provides PIC10F socket support for motor drivers. The board comes with nine example projects and both the SOT-23 and DIP-8 packages. It allows includes firmware, connection diagrams and schematics. interfacing to Microchip’s low-cost family of ® programmers including: PICkit™ 1, MPLAB ® ICD 2 and PICSTART products. Analog Blank Evaluation PCBs SOIC 8-Lead Evaluation Board Analog Software Tools Part Number: SOIC8EV ® FilterLab Active Filter Design Software A blank PCB to easily evaluate Microchip’s The FilterLab Active Filter Software Design 8-pin devices (in SOIC, DIP, MSOP and tool simplifies active filter design and TSSOP packages). Each device pin is provides full schematic diagrams of the filter connected to a pull-up resistor, a pull-down circuit with component values and displays resistor, an in-line resistor and a loading the frequency response. A free download capacitor. The PCB pads allow through hole or surface mount is available at the Microchip web site at: connectors to be installed to ease connection to the board. www.microchip.com Additional passive component footprints are on the board, to allow simple circuits to be implemented. SPICE Software Models SOT-23-3 Voltage Supervisor Evaluation Board Modeling is the heart of any SPICE simulation system and Part Number: VSUPEV Microchip provides a variety of model libraries. This library and Quickly evaluates operation of Voltage service is an example of Microchip’s focus on analog simulation Supervisors and Voltage Detectors in the and modeling. For more information, visit the Microchip web site Microchip SOT-23-3 package. Generic board at: www.microchip.com evaluates SOT-23-3 devices (such as LDOs and Voltage References). Four blank PCBs are Microcontroller Software Tools included for testing multiple devices. ® MPLAB IDE SOT-23-5/6 Voltage Supervisor Evaluation Board ® Microchip’s FREE, integrated toolset for the development of PIC Part Number: VSUPEV2 ® microcontroller and dsPIC digital signal controller embedded This blank PCB allows quick evaluation of applications. MPLAB IDE runs as a 32-bit application on MS Voltage Supervisors and Voltage Detectors Windows, is easy to use and includes a host of free software in the SOT-23-5 and SOT-23-6 packages. components for fast application development and debugging. This PCB supports many Microchip devices, MPLAB IDE also serves as a single, unified graphical user interface including the non-volatile Digital Potentiometer for Microchip and third party software/hardware development tools. and PIC10F2XX devices. ® MPLAB C18 A full-featured ANSI compliant C compiler for the PIC18F family ® of 8-bit PIC microcontrollers. MPLAB C18 is a 32-bit Windows console application as well as a fully integrated component of MPLAB IDE, allowing source level debugging with the MPLAB ICE emulator, the MPLAB ICD 2 debugger and the MPLAB SIM simulator. A full-featured 60-day demo of the MPLAB C18 compiler is available at www.microchip.com. 9 Low Cost Analog and Microcontroller Tools ® MPLAB C30 dsPIC30F Symmetric Key Embedded A fully ANSI-compliant C compiler with standard libraries for the Encryption Library (Eval Copy) PIC24 microcontroller and dsPIC DSC architectures. Provides Part Number: SW300050-EVAL efficient software code generation and extensions that allow A reliable security solution for embedded applications built on the for excellent support of the hardware, such as interrupts and dsPIC30F platform. The Symmetric Key Embedded Encryption peripherals. It is fully integrated with the MPLAB IDE for high library has the following features: Hash Functions, Symmetric- level, source debugging. MPLAB C30 comes complete with Key Encryption/Decryption Functions and Random Number its own assembler, linker and librarian, allowing users to write Generator Functions. and link mixed mode C and assembly programs into a single executable file. A full-featured 60-day demo of the MPLAB C30 dsPIC30F Asymmetric Key Embedded compiler is available at www.microchip.com. Encryption Library (Eval Copy) Part Number: SW300055-EVAL Application Maestro™ Software A stand-alone module tool to configure and incorporate a range A reliable security solution for embedded applications built on the ® of pre-written firmware modules into PIC microcontroller dsPIC30F platform. The Asymmetric-Key Embedded Encryption applications. Using a graphic interfce, select one or more library implements these functions: Public Key Encryption/ modules, then configure the parameters listed. The Application Decryption Functions, Key Agreement Protocol, Signing and Maestro software generates code that can be incorporated into Verification, Hash and Message Digest Functions and Random ® the application project, using MPLAB IDE or any compatible Number Generator (RNG). development environment. dsPIC30F Speech Recognition Library ® MPLAB Visual Device Initializer (Eval Copy) MPLAB VDI graphically configures the microprocessor and Part Number: SW300010-EVAL peripherals, and when complete, generates code usable in This library provides voice control of embedded applications that assembly language or C programs. MPLAB VDI does extensive require an alternative user interface. With a vocabulary of up error checking on assignments and settings, and generates an to 100 words, the Speech Recognition Library allows users to error message if there are conflicts on any resources. control their application vocally. This library is an ideal front end for hands-free products. The library has very modest memory and ® dsPIC Digital Signal Controller processing requirements and is targeted for the dsPIC30F5011/ 5013 and dsPIC30F6012/6014 processors. Evaluation Software Tools dsPIC30F Noise Suppression Library (Eval Copy) Digital Filter Design Lite Part Number: SW300040-EVAL Part Number: SW300001-LT Provides a function to suppress the effect of noise interfering with This software package provides a subset of the functionality in a speech signal. This function is useful for microphone-based the full version of Digital Filter Design. The differences between applications that have a potential for incoming speech corruption the two versions is the number of supported FIR and IIR taps and from ambient noise. It is especially suitable for systems where an the presence of MATLAB support. acoustically isolated noise reference is not available. dsPIC30F Acoustic Echo Cancellation Library dsPIC30F V.32 (non-trellis) Soft Modem Library (Eval Copy) (Eval Copy) Part Number: SW300060-EVAL Part Number: SW300003-EVAL This library provides a function to eliminate echo generated in The Soft Modem library is composed of ITU-T compliant the acoustic path between a speaker and a microphone. Useful algorithms for V.21, V.22, V.22bis, V.23, V.32 and V.32bis modem for speech and telephony applications in which a speaker and recommendations. Bell standard 103 is also included in this a microphone are located in close proximity to each other, and library. susceptible to signals propagating from the speaker to the microphone result in a perceptible and distracting echo effect. dsPIC30F Speech Encoding/Decoding Library (Eval Copy) dsPIC30F Line Echo Cancellation Library Part Number: SW300070-EVAL (Eval Copy) The Speech Encoding/Decoding Library provides toll-quality voice Part Number: SW300080-EVAL compression and decompression to help generate speech-based The dsPIC30F Line Echo Cancellation Library provides a function embedded applications using the dsPIC30F family of digital signal to eliminate echo generated in telephone or digital network controllers. components, such as telephone hybrids. Line echo cancellation is applicable in telephony applications that involve transmitting and receiving signals through a telephone hybrid and is especially suitable for: hands-free cell phone kits, speaker phones, intercoms, teleconferencing systems and voice-over-internet protocol. This library is fully compliant with the ITU-T G.168 standard for Digital Network Echo Cancellers. 10 Low Cost Analog and Microcontroller Tools Low Cost Tool and Product Cross Reference Table Part Number Description Products Supported Part Number Description Products Supported Getting Started Products Power Management Products DM183022 PICDEM™ HPC Explorer Board PIC18F family MCP1252DM-BKLT MCP1252 Charge Pump Backlight Demo MCP1252 Board DM240001 Explorer 16 Demo Board MCP1601EV MCP1601 Buck Regulator Eval Board MCP1601 DV164101 PICkit™ 1 Flash Starter Kit PIC12F629, 675, MCP1612EV MCP1612 Synchronous Buck Regulator MCP1612 PIC16F630, 676 Eval Board DV164120 PICkit™ 2 Starter Kit MCP1630RD-DDBK1 MCP1630 +12V in Dual Output Buck MCP1630 DM164120-1 PICkit™ 2 Low Pin Count Demo Board Converter Ref Design MCP1630DM-DDBK1 MCP1630 1A Bias Supply Demo Board MCP1630 AC164120 Signal Analysis PICtail™ Daughter Board MCP1630RD-LIC1 MCP1630 Li-Ion Multi Bay Battery Charger MCP1630 AC163021 PIC10F Hobby Kit Ref Design ® DV243002 SEEVAL 32 Serial EEPROM All Serial EEPROMS, 24XX, MCP1630RD-LIC2 MCP1630 Low Cost Li-Ion Battery Charger MCP1630 Developer’s Kit 93XX, 25XX series Ref Design ® DM303006 KEELOQ Evaluation Kit II MCP1630DM-NMC1 MCP1630 NiMH Battery Charger Demo Board MCP1630 Linear Products MCP1650DM-LED1 MCP1650 3W White LED Demo Board MCP1650 MCP6S22DM-PICTL MCP6S22 PGA PICtail™ Demo Board MCP6S22/92 MCP1650DM-LED2 MCP1650 Multiple White LED Demo Board MCP1650 MCP6S2XEV MCP6S2X PGA Eval Board MCP6S2X MCP1650EV MCP1650 Boost Controller Eval Board MCP1650 MCP6SX2DM-PCTLPD MCP6SX2 PGA Photodiode PICtail™ MCP6S22/92 MCP1650DM-DDSC1 MCP1650 SEPIC Power Supply Demo MCP1650 Demo Board Board MCP6SX2DM-PCTLTH MCP6SX2 PGA Thermistor PICtail™ MCP6S22/92 MCP1726EV MCP1726 1A LDO Eval Board MCP1726 Demo Board MCP7382XEV MCP7382X Li-Ion Battery Charger Eval MCP7382X Interface Products Board DM163007 PICDEM™ CAN-LIN 1 Demo Board 68L/84L PIC18CXX8 family MCP73831EV MCP73831 Eval Kit MCP73831 DM163011 PICDEM™ CAN-LIN 2 Demo Board 28L/40L PIC18FXX8, MCP7384XEV MCP7384X Li-Ion Battery Charger Eval MCP7384X PIC18FXX8X family Board DM163015 PICDEM™ CAN-LIN 3 Demo Board 64L/80L PIC18FXX8X family MCP73855EV MCP73855 Li-Ion Battery Charger Eval Board MCP73855 DM163028 PICDEM™ LCD Demo Board 64L/80L PIC18FXX90, 28L/ MCP7386XEV MCP7386X Li-Ion Battery Charger Eval MCP7386X 40L PIC16F91X family Board MA160011 PICDEM™ LCD Daughter Board TC115EV TC115 PFM/PWM Boost Converter Eval TC115 DM163025 PICDEM™ FS USB Demo/Eval Board Board TC1016/17EV TC1016/17 LDO Linear Regulator Eval Board TC1016/17 DM163010 PICDEM™ USB Demo Board PIC16C7X5 TC1303BDM-DDBK1 TC1303B Demo Board TC1303B AC163002 PICDEM™ MSC 1 Infrared (IR) Driver Daughter Board (requires DM163012) DM163026 PICDEM™ Low Power Solutions Demo DM163027-2 PICDEM™ Z Demo Kit Board AC163001 PICDEM™ MSC1 Switch Mode Power PIC16C781/782 DV164102 rfPICkit Dev Kit 1 Supply (SMPS) Daughter Board ® MCP2140DM-TMPSNS MCP2140 IrDA Wireless Temp. Demo MCP2140 Thermal Management Products Board MCP9700DM-PCTL MCP9700 Temperature-to-Voltage Converter MCP9700 MCP212XEV-DB MCP212X Developer’s Daughter Board PICtail™ Demo Board DM163008 MCP2120/2150 Infrared Developer’s Kit MCP2120, MCP2150 MCP9800DM-PCTL MCP9800 Temperature Sensor PICtail™ MCP9800 Demo Board MCP215XDM MCP215X Data Logger Demo Board MCP2150/55 MCP9800DM-DL MCP9800 Temperature Data Logger Demo MCP9800 MCP215X/40EV-DB MCP215X/40 Developer’s Daughter MCP2140, MCP2150/55 Board Board TC72DM-PICTL TC72 Digital Temperature Sensor PICtail™ TC72 MCP23X08EV MCP23X08 8-bit GPIO Expander Eval MCP23008, MCP23S08 Demo Board Board TC74DEMO TC74 Serial Digital Thermal Sensor Demo TC74 DV250501 MCP250XX CAN I/O Expanders MCP25020, MCP25025, Board Developer’s Kit MCP25050, MCP25055 TC77DM-PICTL TC77 Thermal Sensor PICtail™ Demo Board TC77 DV251001 MCP2510/2515 CAN Developer’s Kit MCP2510, MCP2515 TC642DEMO TC64X/64XB Fan Speed Controller Demo TC642 MCP2515DM-PCTL MCP2515 CAN Controller PICtail™ MCP2515 Board Demo Board TC642EV TC64X/64XB Fan Speed Controller Eval TC642, 642B, 646, 646B, Mixed Signal Products Board 647, 647B, 648, 648B, ® DV3201A MCP3XXX Single-Dual ADC MXDEV MCP3001/02, MCP3201/02 649, 649B Daughter Board TC650DEMO TC650 Fan Controller Demo Board TC650 ® DV3204A MCP3204/08 MXDEV Daughter Board MCP3204, MCP3208 TC652DEMO TC652 Fan Controller Demo Board TC652 MCP3221DM-PCTL MCP3221 12-bit A/D PICtail Demo Board MCP3221 TC1047ADM-PICTL TC1047A Temperature-to-Voltage Converter TC1047A MCP3551DM-PCTL MCP3551 Delta-Sigma ADC Demo Board MCP3551 PICtail™ Demo Board Demonstration Boards MCP3905EV MCP3905 Energy Meter Eval Board MCP3905 DM300017 dsPICDEM™ 28-Pin Starter Demo Board MCP3905RD-PM1 MCP3905 Energy Meter Ref Design MCP3905 DM300019 dsPICDEM™ 80-Pin Starter Dev Board MCP402XEV MCP402X Non-Volatile Digital MCP4021, MCP4022, Potentiometer Eval Board MCP4023, MCP4024 DM300018 dsPICDEM™ 2 Demo Board DV42XXX MCP42XXX Digital Pot Eval Board MCP42010, MCP42050, DM163001 PICDEM™ 1 Demo Board PIC16C5X, 55X, 62X, MCP42100 CE62X, 71, 710, 711, 715, MXSIGDM Mixed-Signal PICtail™ Demo Board TX132X, MCP330X, 770, 771, 83, 84 and MCP320X, MCP494X, PIC17C42, 43, 44 MCP3221, MCP3201, DM163022 PICDEM™ 2 Plus Demo Board PIC16C62, 63, 64, 65, 66, MCP1525, MCP1541 67, 72, 73, 74, 76, 77, 87X, DVMCPA MXDEV Analog Evaluation System MCP3001/02, MCP3004/08, 773, 774 and PIC18CXX2, MCP3201/02, MCP3204/08 642, 662 and PIC18FXXX AC163003 PICDEM™ MSC1 Delta-Sigma ADC PIC16C781/782 DM163003 PICDEM™ 3 Demo Board PIC16C923/24 Daughter Board DM163014 PICDEM™ 4 Demo Board PIC12F629, 675, AC163004 PICDEM™ MSC1 Flow Rate Sensor PIC16C782 PIC16F630, 676, 684, 627A, Daughter Board 628A, 648A, 818, 819, 87, DM163012 PICDEM™ MSC1 Mixed Signal PIC16C781/782 88, PIC18F1220, 1320 Controller Demo Board DM163029 PICDEM™ Mechatronics Demo Board 11 Worldwide Sales and Service At Microchip, we know that it takes more than product specifications to create loyal customers. In addition to a broad product portfolio, we understand the value of a complete design solution. That’s why we maintain a worldwide network of sales and support. Our technical support is unmatched with a global network of experienced field application engineers and technical support personnel ready to provide product and system assistance to help you further streamline your design, prototype and production activities. Microchip on-line technical support is available at: http://support.microchip.com. Sales Office Listing AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Atlanta Australia - Sydney India - Bangalore Austria - Wels Tel: 770-640-0034 Tel: 61-2-9868-6733 Tel: 91-80-2229-0061 Tel: 43-7242-2244-399 Boston China - Beijing India - New Delhi Denmark - Copenhagen Tel: 774-760-0087 Tel: 86-10-8528-2100 Tel: 91-11-5160-8631 Tel: 45-4450-2828 Chicago China - Chengdu India - Pune France - Paris Tel: 630-285-0071 Tel: 86-28-8676-6200 Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20 Dallas China - Fuzhou Japan - Yokohama Germany - Munich Tel: 972-818-7423 Tel: 86-591-8750-3506 Tel: 81-45-471- 6166 Tel: 49-89-627-144-0 Detroit China - Hong Kong SAR Korea - Gumi Italy - Milan Tel: 248-538-2250 Tel: 852-2401-1200 Tel: 82-54-473-4301 Tel: 39-0331-742611 Kokomo China - Qingdao Korea - Seoul Netherlands - Drunen Tel: 765-864-8360 Tel: 86-532-8502-7355 Tel: 82-2-554-7200 Tel: 31-416-690399 Los Angeles China - Shanghai Malaysia - Penang Spain - Madrid Tel: 949-462-9523 Tel: 86-21-5407-5533 Tel: 60-4-646-8870 Tel: 34-91-708-08-90 San Jose China - Shenyang Philippines - Manila UK - Wokingham Tel: 650-215-1444 Tel: 86-24-2334-2829 Tel: 63-2-634-9065 Tel: 44-118-921-5869 Toronto China - Shenzhen Singapore Mississauga, Ontario Tel: 86-755-8203-2660 Tel: 65-6334-8870 Tel: 905-673-0699 China - Shunde Taiwan - Hsin Chu Tel: 86-757-2839-5507 Tel: 886-3-572-9526 China - Wuhan Taiwan - Kaohsiung Tel: 86-27-5980-5300 Tel: 886-7-536-4818 China - Xian Taiwan - Taipei Tel: 86-29-8833-7250 Tel: 886-2-2500-6610 Thailand - Bangkok Tel: 66-2-694-1351 www.microchip.com Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199 Microcontrollers Digital Signal Controllers Analog Serial EEPROMs • • • Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, MPLAB, PIC, PICmicro, PICSTART and rfPIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, MXDEV, MXLAB and SEEVAL are registered trademarks of Microchip Technology Incorporated in the U.S.A. Application Maestro, dsPICDEM, ICSP, PICkit, PICDEM and PICtail are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2005, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 12/05 DS51560C *DS51560C*