NEW NEW NEW NEW Low-Cost Development Tools Low-Cost Development Tools Guide ® For use with Analog and Interface Products, 8-bit PIC ® Microcontrollers (MCUs), 16-bit MCUs and dsPIC Digital Signal ® Controllers (DSCs), Memory and KEELOQ Products. Microchip offers a wide range of Getting Started Products development tools – all designed Explorer 16 Starter Kit to help you achieve faster time to Part Number: DV164033 market. For a complete listing of A complete set of tools for application development using the PIC24F, Microchip products and their PIC24H and dsPIC33F 16-bit families. The kit includes MPLAB® ICD 2, corresponding users guides, Explorer 16 Development Board, 9V universal power supply, serial data sheets and technical cable and both a PIC24FJ128GA010 and dsPIC33F256GP710 PIM. information, visit our web site at: Tutorials, user manuals, MPLAB® IDE and MPLAB C30 C Compiler www.microchip.com (student edition) are included. PICkit™ 2 Debug Express Fall 2006 Part Number: DV164121 Getting Started Products ...........1-2 Allows in-circuit programmer/debugger functions on selected PIC® MCUs. This provides the ability to run, examine and modify the program, Linear Products............................2 while the MCU is embedded in the hardware, thereby assisting in debugging the firmware and hardware together. Programs can be run, Interface Products .....................3-5 stopped and single-stepped. Includes 44-pin demo board. Requires Mixed Signal Products ...............5-6 MPLAB® IDE version 7.40 or later. Power-Management Products .....6-9 PICkit™ Serial Analyzer Part Number: DV164122 Thermal Management Products .............................. 9-10 A low-cost development kit with an easy-to-use interface. Includes a development board containing Microchip’s 28-pin PIC16F886 Flash PIC® MCU and dsPIC® DSC microcontroller. This MCU contains fi rmware to emulate several Demonstration Boards ........10-11 functions typically found in serial systems. The PICkit™ Serial Analyzer can be used to exercise these functions and display the data. Blank Analog Evaluation PCBs .....11 PICDEM™ System Management Kit Programmers .............................12 Part Number: DM164123 Analog Software Tools ................12 An inexpensive demonstration and training tool that allows communication between a PC and the serial protocol of the system MCU Software Tools ...................12 being tested. Integrates the functions of a dedicated Real-Time Clock dsPIC® DSC Evaluation (RTC), serial EEPROM, thermal management controller and Analog- Software Tools ........................13 to-Digital Converter (ADC) into a single PIC® microcontroller. Ideal for designing applications with a variety of integrated peripherals. ™ PICkit 1 Flash Starter Kit Part Number: DV164101 A low-cost starter development kit with an easy-to-use interface for programming Microchip’s 8-/14-pin Flash PIC® MCUs. The kit includes everything needed to program, evaluate and develop applications. Seven tutorials with all source code files are furnished. ™ PICkit 2 Starter Kit Part Number: DV164120 PICkit™ 2 is small, easy-to-use starter kit that enables users to start writing code and programming with PIC® MCUs. Features full-speed USB support and firmware upgradeability in a low-cost tool. Includes a low pin-count demo board. Upgrade firmware for debugger function. NEW NEW Low-Cost Development Tools Guide PICDEM™ HPC Explorer Board Linear Products Part Number: DM183022 MCP6271 Active Filter Evaluation Kit This low-cost demo board is used to evaluate Part Number: MCP6XXXDM-FLTR the performance of High Pin Count (HPC) 8-bit PIC18F series microcontrollers. The This kit supports active filters designed by board features a PIC18F8722 MCU, which FilterLab® V2.0. These filters are all pole and is the superset of the entire 64- and 80-pin are built by cascading first and second order PIC18FXXXX general purpose family. A daughter sections. The kit includes: one PCB designed board (mezzanine) is also part of the kit and allows different to provide mid-supply biasing to the other processors sharing the same pin out to be mounted and tested on printed circuit boards, four PCBs that support active filter designs the explorer board. with filter order between n = 1 and 8 (output test point for lab equipment provided) and op amps, zero ohm jumpers, resistors and Signal Analysis PICtail™ Daughter Board capacitors that can be used to help build filters. Part Number: AC164120 MCP6S22 PGA PICtail™ Demonstration Board This board works as an extension to the Part Number: MCP6S22DM-PICTL PICkit™ 1 Flash Starter Kit. When combined with PICkit 1 firmware version 2.0.0 or later This board evaluates/demonstrates and the signal-analysis PC program, the board Microchip’s MCP6S21/2/6/8 Programmable performs signal-analysis capabilities such as: Gain Amplifier (PGA) family. Interface this real-time strip chart, oscilloscope, Fast Fourier board with the PICkit™ 1 Flash Starter Kit to Transformation (FFT), histogram and programming. The board demonstrate firmware integration between comes populated with a PIC16F684 and two 25LC640 the PIC® MCU and PGA devices, while allowing modification and SPI-compatible serial EEPROM memory devices. development of firmware for specific requirements. MCP6S2X PGA Evaluation Board PIC10F 6L SOT-23 to 8P DIP Adapter Kit Part Number: MCP6S2XEV Part Number: AC163021 Provides a versatile selection of input This is a kit consisting of (5) PIC10F206 channels and gains to evaluate device SOT-23 devices, (5) pin scramble boards and performance. Board supports multiple input DIP pins. Once assembled, this makes the signal sources. Two devices can be cascaded SOT-23 look like a standard 8-pin DIP and can to produce gain to 1024 V/V. be used directly in standard development tool sockets. This kit should be used only for early MCP6SX2 PGA Photodiode PICtail™ evaluation. Demonstration Board SEEVAL® 32 Serial EEPROM Evaluation Kit Part Number: MCP6SX2DM-PCTLPD Part Number: DV243002 Opens possibilities to process other sensor An evaluation and programming system signals. Increases the number of PIC® MCU supporting all Microchip Serial EEPROMS I/O pins available for other purposes. Features including future devices. Using a ZIF socket, a PNZ334 photo-diode, MCP6001U op amp and standard DIP sockets are directly supported. MCP6S22 and MCP6S92 Programmable Gain The SEEVAL 32 gives the designer the ability Amplifiers (PGA). to read, write or erase any byte, page or entire array, and to display, MCP6SX2 PGA Thermistor PICtail™ save or load this data as a file. SEEVAL 32 provides support for Windows® XP , Windows ME, Windows 2000, Windows NT® 4.0 and Demonstration Board Windows 95/98. Part Number: MCP6SX2DM-PCTLTH Features MCP6S22 and MCP6S92 PGAs. KEELOQ® Evaluation Kit II Helps overcome non-linear response of the Part Number: DM303006 on-board NTC thermistor. Opens possibilities This kit demonstrates the capabilities of the of temperature-correcting another sensor, and code-hopping technology used in security increasing the number of PIC® MCU I/O pins available for other systems such as garage door openers, auto purposes. keyless entry, etc. for secure access and/or authentication. It includes a main board and Humidity Sensor PICtail™ 2 transmitters to demonstrate encoders and decoders. The fully Demonstration Board functional kit allows a short learning cycle into the technology. Part Number: PIC16F690DM-PCTLHS This board supports the capacitive humidity sensor application note AN1016. It measures the capacitance of a relative humidity sensor plugged into the board. The on-board microcontroller sends the measured and calculated relative humidity (RH) to a PC for display. The board can also measure small capacitors in different ranges of values using a dual slope integration method. 2 NEW NEW NEW NEW Low-Cost Development Tools Guide PICDEM™ FS USB Demonstration/Evaluation Board Interface Products Part Number: DM163025 GPIO Expander Keypad and Demonstrates and evaluates the PIC18F4550 LCD Demonstration Board family of Flash MCUs with full-speed USB 2.0 Part Number: GPIODM-KPLCD interface. The board contains a PIC18F4550 MCU in a 44-pin TQFP package, representing The GPIO Expander Keypad and LCD Demo Board is the superset of the entire family of devices. designed to demonstrate the use of the MCP23S08/17 2 (SPI interface) and the MCP23008/17 (I C™ interface) PICDEM™ USB Demonstration Board devices in a keypad and LCD example. The MCP23X17 Part Number: DM163010 (16-bit) devices interface to a 2x16 LCD module and the MCP23X08 (8-bit) devices interface to a 4x4 keyed Demonstrates the PIC16C745 and PIC16C765 matrix. USB MCUs communicating to a PC using the USB port. PICDEM™ CAN-LIN 1 Demonstration Board Part Number: DM163007 PICDEM™ MSC1 Infrared (IR) Driver Microchip offers three PICDEM CAN-LIN Demo Daughter Board Boards to support different PIC® MCUs. All demonstrate the main features of the devices, Part Number: AC163002 especially those features of the integrated This board, in combination with the PICDEM CAN module. The boards also employ a LIN sub-network using the MSC1 Demo Board, serves as a demonstration PIC16C43X and PIC18F320 device families. Supports: 68-pin PLCC and evaluation kit for designing a high-power PIC18C658, 84-pin PLCC PIC18C858 devices and 20-pin PDIP IR remote control transmitter using the PIC16C432 with integrated LIN Bus transceiver. PIC16C782. The daughter board, in combination with the included IR receiver, implements both receive and transmit sections of a PICDEM™ CAN-LIN 2 Demonstration Board Pulse Width Modulation (PWM) IR remote control system. Part Number: DM163011 PICtail™ Daughter Board for SD and PICDEM CAN-LIN 2 supports: 28-pin SDIP PIC18F258 and PIC18F268X devices, 40-pin MMC Cards PDIP PIC18F458 and PIC18F468X devices and Part Number: AC164122 20-pin PDIP PIC16C432 with integrated LIN Bus This PICtail daughter board interfaces with newer transceiver. development boards that offer the PICtail and PICtail Plus connector interface; such as the PICDEM™ CAN-LIN 3 Demonstration Board PICDEM™ FS USB development board. This board Part Number: DM163015 also interfaces with the Explorer 16 Development PICDEM CAN-LIN 3 supports: 64-pin TQFP Board via the PICtail Plus connector. PIC18F6680, 80-pin TQFP PIC18F8680 devices, 20-pin SSOP PIC18F1320 and MCP201 LIN Bus Ethernet PICtail™ Daughter Board transceiver. Part Number: AC164121 Provides a cost-effective method of evaluating ™ PICDEM LCD Demonstration Board and developing Ethernet-control applications. Part Number: DM163028 This board is populated with a 28-pin Ethernet Demonstrates the main features of the LCD controller, which interfaces to the RJ-45 female Flash 28-, 40-, 64- and 80-pin PIC® MCUs connector. Designed for flexibility, this board with power-management features. The board can be plugged into the popular PICDEM™ HPC Explorer Board is populated with the PIC18F8490 and other (DM183022). devices are supported via a transition socket. A sample LCD glass display is included for custom prototyping. The Ethernet PICtail™ Plus Daughter Board PICDEM LCD kit provides tutorial firmware, which is included in the Part Number: AC164123 preprogrammed devices. This board provides a cost-effective method of evaluating and developing Ethernet-control ™ PICDEM LCD Plug-In Modules applications. Designed for flexibility, the board Part Number: MA160011 can be plugged into Microchip’s Explorer 16 A simple and inexpensive method to utilize Development Board (DM240001). The board the PICDEM LCD platform for development with is populated with a 28-pin ENC28J60 Ethernet controller, which PIC16F913/914/916/917/946. The plug-in interfaces to the RJ-45 female connector. When used in conjunction modules kit consists of one of each of the with the Microchip TCP/IP stack, the daughter board allows a following: a PIC16F916 module (superset of the developer to connect any Microchip 16-bit product to an Ethernet PIC16F913), PIC16F917 module (superset of the PIC16F917) and a device. PIC16F946 module. 3 NEW NEW Low-Cost Development Tools Guide ZENA™ Network Analyzer MCP215X Data Logger Demonstration Board Part Number: DM183023 Part Number: MCP215XDM A wireless network analyzer that graphically Demonstrates the MCP2150 (or MCP2155) displays wireless network traffic following IrDA® Standard Protocol Stack Controller the IEEE 802.15.4 specification on the 2.4 device in a real world application. Shows how GHz band. Supports both the ZigBee™ and to integrate an IrDA standard port into an MiWi™ protocols. In conjunction with the hardware packet sniffer, embedded system. the software can analyze complete network traffic and graphically MCP215X/40 Developer’s Daughter Board display decoded packets, when developing with either the ZigBee or Part Number: MCP215X/40EV-DB the MiWi protocols. Used to evaluate and demonstrate the ® rfPIC Development Kit 1 MCP2150, MCP2155 or the MCP2140 IrDA® Part Number: DV164102 Standard Protocol Handler with Encoder/Decoder devices. Headers allow the MCP215X/40 Provides design engineers with an easy way Developer’s Daughter Board to be easily to evaluate unidirectional remote sense jumpered into systems for development and control wireless links based on the purposes. This board also interfaces with these new low-cost rfPIC12F675 and rfRXD0420/0920 devices. PIC® MCU demo boards: PICDEM™ HPC Explorer, PICDEM FS USB The kit is based on the PICkit™ 1 Flash Starter and PICDEM LCD Demo Board. Kit and consists of modular building blocks for different transmitters and receivers that can be utilized for prototype systems or to MCP23X08 8-bit GPIO Expander Evaluation Board evaluate different options. Part Number: MCP23X08EV ® rfPIC Development Kit 1 Accessories Demonstrates simple input/output functionality 2 rfPIC® Transmitter Module (433.92 MHz) of the MCP23008 (I C™ interface) and the Part Number: AC164101 MCP23S08 (SPI interface). The system rfPIC® Transmitter Module (315 MHz) demonstrates the simplicity of monitoring four Part Number: AC164102 inputs and applying the level to associated outputs. rfPIC® Receiver Module (433.92 MHz) Part Number: AC164103 MCP23X17 16-bit GPIO Expander rfPIC® Receiver Module (315 MHz) Evaluation Board Part Number: AC164104 Part Number: MCP23X17EV rfPIC® Receiver Module 5 pack (433.92 MHz) This board demonstrates the simple input/ Part Number: AC164105 2 output functionality of the MCP23017 (I C™ rfPIC® Receiver Module 5 pack (315 MHz) interface) and the MCP23S17 (SPI interface). Part Number: AC164106 The system demonstrates the simplicity of monitoring four pins ® configured as inputs and applying a predetermined pattern on LEDs MCP2140 IrDA Wireless Temp Demonstration Board connected to the remaining 12 pins configured as outputs. Part Number: MCP2140DM-TMPSNS Demonstrates the MCP2140 device in a MCP250XX CAN I/O Expander Developer’s Kit real-world application. This design is an Part Number: DV250501 example of how to integrate an IrDA® standard Supporting CAN V2.0B active with bus rates up port into a system. to 1 Mb/s, this kit includes everything needed to demonstrate, design, develop and configure a CAN node using the MCP250XX CAN I/O Expander MCP212X Developer’s Daughter Board family of products. Part Number: MCP212XEV-DB Evaluates and demonstrates the MCP2122 or MCP2510/2515 CAN Developer’s Kit MCP2120 IrDA® Standard Encoder/Decoder devices. A header allows the MCP212X Part Number: DV251001 Daughter Board to be easily jumpered into To speed up software development and enable systems for development purposes. This board introduction of CAN to those who are unfamiliar also interfaces with these new low-cost PIC® with the protocol, Microchip offers a unique MCU demo boards: PICDEM™ HPC Explorer, PICDEM FS USB and combination of a software development tool and PICDEM LCD Demo Board. a CAN message/communication tool called the MCP2515/2510 CAN Developer’s Kit. MCP2120/2150 Infrared Developer’s Kit Part Number: DM163008 Includes everything needed to create a system that communicates using infrared. The kit contains two MCP2120 developer’s boards, enabling a complete system (transmitter and receiver) to be implemented, and a MCP2150 developer’s board that can be used to set up a system to communicate with other IrDA® standard enabled devices. 4 NEW NEW NEW Low-Cost Development Tools Guide ™ MCP2515 CAN Controller PICtail MCP3551 Delta-Sigma ADC Demonstration Board Part Number: MCP3551DM-PCTL Demonstration Board Part Number: MCP2515DM-PCTL Designed to demonstrate the MCP3551 device’s 22-bit Delta-Sigma Analog-to-Digital Converter (ADC) This demo board implements a simple CAN performance using DataView™ software installed on a bus using two nodes. One using the MCP2515 ® PC. This demo board can be used with MPLAB ICD 2, Stand Alone CAN controller and the other PICkit™ 1 Flash Starter Kit or PICkit™ 2 for developing using the MCP25020 CAN I/O Expander. Each demonstration/evaluation firmware. node utilizes one input (push button) and one output (LED). The boards demonstrate a simple, inexpensive implementation of a CAN bus. MCP3905 Energy Meter Evaluation Board Part Number: MCP3905EV Mixed Signal Products This evaluation board is designed to test out a variety of energy meter designs. On the input side ® MCP3XXX Single/Dual ADC MXDEV high-voltage line and load AC-plug headers are Daughter Board included, along with mounting holes for shunts, Part Number: DV3201A current transformers and screw-type connections for wiring. On the output side a large prototype area is included Supports MCP3001, MCP3002, MCP3201 along with optical isolation and a standard PICtail™ header for and MCP3202 stand-alone A/D converters. ® experiments with a variety of PIC MCU-based energy meter Used with the MXDEV Driver Board (available designs. separately). MCP3905 Energy Meter Reference Design ® MCP3204/08 MXDEV Daughter Board Part Number: MCP3905RD-PM1 Part Number: DV3204A A stand-alone low-cost energy meter that Supports MCP3004, MCP3008, MCP3204 can act as either a stand alone energy and MCP3208 stand-alone A/D converters. meter, or as the analog front end design for Used with the MXDEV Driver Board (available LCD MCU-based meters. This design is specified with an energy separately). measurement error of 0.1% typical across 1:500 dynamic range for high accurate energy meter designs and is compliant with EMC ™ MCP3221 12-bit A/D PICtail Demonstration Board requirements per energy metering standards IEC62053 and legacy Part Number: MCP3221DM-PCTL IEC61036, IEC1046 and IEC687. Designed to demonstrate the MCP3221 device MCP4XXX Digital Potentiometer using DataView™ Windows software for a Daughter Board graphical real-time data analysis from the board Part Number: MCP4XXXDM-DB through USB. This demo board can also be used for firmware development to the MCP3221 device This board allows evaluation of the MCP42XXX using the PICkit™ 1 Flash Starter Kit. and MCP402X Digital Potentiometers. The MCP42XXX are dual digital potentiometer devices that have the same characteristics as the single MCP355X Tiny Application Sensor digital potentiometer devices (MCP41XXX). Demonstration Board The MCP402X devices are non-volatile and have similar Part Number: MCP355XDM-TAS characteristics to their volatile memory versions (MCP401X). This 1” x 1” board is designed to demonstrate The board supports two MCP42XXX devices to allow the resistor the performance of the MCP3550/1/3 devices networks to be “stacked” and form a programmable windowed in a simple low-cost application. The circuit uses digital potentiometer. The board also has a voltage doubler device a ratiometric sensor configuration and uses the (TC1240A), which can be used to show the WiperLock™ Technology system power supply as the voltage reference. feature of the MCP4021. MCP402X Non-Volatile Digital Potentiometer MCP355X Sensor Applications Evaluation Board Developer’s Board Part Number: MCP402XEV Part Number: MCP355XDV-MS1 This low-cost board enables user’s to exercise all This board allows for easy design of high of the features of the MCP401X and MCP402X resolution systems such as weigh scale, devices. Kit includes one populated and one temperature sensing or other small signal unpopulated PCB. The populated board has systems requiring precise signal conditioning an MCP4021-103E/SN digital potentiometer circuits. The reference design includes LCD display firmware that configured as a “windowed” potentiometer using a 2.5 kΩ pull-up performs all the necessary functions including ADC sampling, and a 2.5 kΩ pull-down resistor. The PCB supports the 8-pin SOIC, USB communication for PC data analysis, LCD display output, zero SOT-23-6 and SOT-23-5 package variations. The unpopulated PCB cancellation, full scale calibration and units display in gram (g), allows user’s to build the exact combination of components their kilogram (kg) or ADC output units. application requires. 5 NEW NEW Low-Cost Development Tools Guide MCP42XXX Digital Potentiometer Evaluation Board Power-Management Products Part Number: DV42XXX MCP1252 Charge Pump Backlight Includes an evaluation board, prototype board, Demonstration Board RS-232 cable, 9V DC power supply, MXLAB® Part Number: MCP1252DM-BKLT software, digital potentiometers and PIC® MCU. Used with the MXDEV® Driver Board (available Demonstrates the use of a charge pump separately). device in an LED application and acts as a platform to evaluate the MCP1252 device PICDEM™ MSC1 Delta-Sigma ADC Daughter Board in general. Light intensity is controlled Part Number: AC163003 uniformly through the use of ballast resistors. A PIC10F206 MCU provides an enable signal to the MCP1252 In combination with the PICDEM MSC1 Demo and accepts a push-button input that allows the white LEDs to be Board, this board serves as a demonstration and adjusted to five different light intensities. evaluation kit for designing high-resolution Delta Sigma Analog-to-Digital Converters using the MCP1256/7/8/9 Charge Pump PIC16C781/782. Evaluation Board PICDEM™ MSC1 Flow Rate Sensor Daughter Board Part Number: MCP1256/7/8/9EV Part Number: AC163004 An evaluation and demonstration tool for the MCP1256/7/8/9 regulated 3.3V, low-ripple charge This board, in combination with the pumps with low-operating current Sleep mode or PICDEM MSC1 Demo Board, is a complete Bypass mode. The board is set-up to evaluate demonstration kit for a high sensitivity simple, stand-alone, DC-to-DC conversion. The hot-wire anemometer-styled fl ow rate sensor two evaluation circuits provided, demonstrate the using the PIC16C782. versatility of the MCP1256/7/8/9 family. ™ PICDEM MSC1 Mixed Signal Controller MCP1601 Buck Regulator Evaluation Board Demonstration Board Part Number: MCP1601EV Part Number: DM163012 For both battery-powered and distributed- The PICDEM MSC1 with its PC-based power applications. Operates over a 2.7V to Graphical User Interface (GUI) software 5.5V input range while delivering 500 mA of serves as a stand-alone development and output current. evaluation tool for the PIC16C781/782 MCUs, or as a user interface to the peripherals. MCP1612 Synchronous Buck Regulator Evaluation Board Mixed-Signal PICtail™ Demonstration Board Part Number: MCP1612EV Part Number: MXSIGDM Features a 1A 1.4 MHz synchronous buck Quickly and accurately evaluates performance regulator in two buck converter applications. The of Microchip DACs, A/D converters, LDOs, applications use the 8-lead MSOP and 8-lead DFN VREFs and operational amplifiers. Interfaces to packages respectively. Selectable output voltages the PICkit™ 1 Flash Starter Kit. Can use with and a shutdown terminal are available on each a PIC16F767 for stand-alone operation. Supports many Microchip converter. mixed-signal devices (surface mount footprint). ® MXDEV Analog Evaluation System Part Number: DVMCPA MCP1630 Automotive Input Boost Converter Versatile, easy-to-use system helps evaluate Demonstration Board mixed-signal products. Includes the Part Number: MCP1630DM-DDBS1 DVMCPA MCP Driver Board, which provides data acquisition and analysis/display in a Demonstrates the MCP1630/V high-speed Windows® environment. pulse width modulator used for automotive applications. When used with a microcontroller, the MCP1630/V devices control the power system duty cycle to provide regulated output voltage. The programmable PIC12F683 microcontroller is used to provide oscillator pulses at switching frequency of 500 kHz and set maximum duty cycle. The user may also modify or develop their own firmware routines to further evaluate the MCP1630/V devices in this application. 6 NEW NEW Low-Cost Development Tools Guide MCP1630 Coupled Inductor Boost MCP1630 Li-Ion Multi-Bay Battery Charger Demonstration Board Reference Design Part Number: MCP1630DM-DDBS2 Part Number: MCP1630RD-LIC1 This board demonstrates Microchip’s high- Used to evaluate the MCP1630 used in a SEPIC speed Pulse Width Modulator (PWM) used in power converter application. This charger is a coupled inductor design. When used with a capable of charging two single-cell, Li-Ion battery programmable PIC12F683 microcontroller, the packs in parallel utilizing an input voltage of 10V MCP1630 device controls the power system to 30V (battery packs are not included). duty cycle to provide different regulated output voltages from 15V-40V, generates oscillator pulses, reference voltage, output voltage selection and ON/OFF MCP1630 Low-Cost Li-Ion Battery Charger of converter using push button S1. The user can also modify Reference Design or develop their own firmware routines to further evaluate the Part Number: MCP1630RD-LIC2 MCP1630 device in this application. This board is used to evaluate the MCP1630 MCP1630 Automotive Input, Triple Output device used in a SEPIC power converter Converter Demonstration Board applications. The charger is capable of charging Part Number: MCP1630DM-DDBK4 a single-cell, Li-Ion battery pack utilizing an input voltage of 6V to 18V (battery packs are not Demonstrates a high-speed Pulse Width Modulator (PWM) used included). for automotive application. When used in conjunction with a microcontroller, the MCP1630 will control the power system MCP1630 NiMH Battery Charger duty cycle to provide three regulated output voltages of 3.3V Demonstration Board at 1.2A, 1.2V at 600 mA and 4.7V at 150 mA. The PIC12F683 Part Number: MCP1630DM-NMC1 microcontroller is used to provide reference voltage, ON/OFF of Converter using push button SW1 and oscillator pulses at switching High-speed PWM interfaces to PIC16LF818, frequency of 250 kHz. The MCP1630 generates duty cycle based providing a complete NiMH battery charger on various external inputs. External signals include the input with fuel gauge capability. Minimizes external oscillator pulses, reference voltage from PIC12F683 device, and the inductor, capacitor cost; performs complex feedback voltage. The user can also modify or develop their own NiMH battery charger timing functions. firmware routines to further evaluate the MCP1630 device in this Protects battery circuit if a fault occurs. application. MCP1650 3W White LED Demonstration Board MCP1630 +12V in Dual-Output Buck Converter Part Number: MCP1650DM-LED1 Reference Design Demonstrates the MCP165X Boost Controller Part Number: MCP1630RD-DDBK1 product family in a battery-powered white LED application with an input voltage range of 2.0V to This demo board is a dual-output 4.5V. programmable power supply capable of 20A per output. Both outputs switch at 500 kHz 180° out of phase while powered from a +12V input source. Features include programmable MCP1650 Multiple White LED Demonstration Board output voltage, power good output indication, sequencing, Part Number: MCP1650DM-LED2 overcurrent and overtemperature. The MCP1650 Multiple White LED Demo MCP1630 1A Bias Supply Demonstration Board Board uses the MCP1650 IC to power the nine Part Number: MCP1630DM-DDBK1 white LEDs which are connected in series. A PIC10F202 MCU in a SOT-23-6 package is used This demo board is used to evaluate Microchip’s to provide the PWM signal to the MCP1650. It MCP1630 used in a SEPIC power converter also accepts a push button input that allows the application. The demo board is capable of user to adjust the white LEDs to three different providing a regulated output from an input intensities of 100%, 50% and 25%. voltage of 9V. The regulated output voltage is selectable at 3.3V or 5V and remains constant MCP1650 Boost Controller Evaluation Board for an output load range of 0A to 1A. An LED indicates the Part Number: MCP1650EV presence of output voltage. Demonstrates the MCP165X Boost Controller product family in two high-power, boost- converter applications. 7 NEW Low-Cost Development Tools Guide MCP1650 SEPIC Power Supply Demonstration Board MCP7384X Li-Ion Battery Charger Evaluation Board Part Number: MCP1650DM-DDSC1 Part Number: MCP7384XEV Used to evaluate Microchip’s MCP1650 Three circuits use MCP73841, MCP73842 boost controller in a low-power application and MCP73843 devices to demonstrate that requires a regulated output voltage from simple, stand-alone, linear charging of an input source that can be greater than, single- or dual-cell, Lithium-Ion/Lithium-Polymer less than or equal to the output voltage. As battery packs (battery packs are not included). provided, this board generates a 5.0V output from a 3.0V to 7.0V MCP73855 Li-Ion Battery Charger Evaluation Board source. Part Number: MCP73855EV MCP1726 1A LDO Evaluation Board Use to evaluate simple, stand-alone, linear Part Number: MCP1726EV charging of single cell Li-Ion/Li-Polymer battery packs (the battery packs are not included). This board features 1A, Low Quiescent Current The board design provides constant current LDO Regulator in two circuits. The circuits charging followed by constant voltage charging feature adjustable versions of the MCP1726 in with automatic charge termination. the 8-lead 3x3 DFN and 8-pin SOIC packages respectively. Both circuits have potentiometers MCP7386X Li-Ion Battery Charger Evaluation Board to adjust the output voltage of the LDO. Fixed voltage versions of the device can also be evaluated with this Part Number: MCP7386XEV board. Use to evaluate simple, stand-alone, linear charging of single/dual cell Lithium-Ion/ MCP7382X Li-Ion Battery Charger Evaluation Board Lithium-Polymer battery packs (the battery Part Number: MCP7382XEV packs are not included). The board design provides constant current charging followed Three circuits utilizing the MCP73826, by constant voltage charging with automatic MCP73827 and MCP73828 devices to charge termination. demonstrate simple, stand-alone, linear charging of single cell Lithium-Ion/ TC115 PFM/PWM Boost Converter Evaluation Board Lithium-Polymer battery packs (the battery Part Number: TC115EV packs are not included). A complete, step-up, switch-mode, DC-DC MCP73831 Evaluation Kit power converter. This board generates a Part Number: MCP73831EV regulated 3.0V output at load currents up to 110 mA. Different output voltages are The two evaluation boards provided are set obtainable by replacing the fixed 3.0V output up to evaluate simple, stand-alone, linear TC115 with a fixed 3.3V or 5.0V device. charging of single cell Li-Ion/Li-Polymer battery Requires the use of an external input voltage packs (the battery packs are not included). source (0.9V – VOUT). The board is provided with an aluminum Each board design provides constant current electrolytic output capacitor with additional surface-mount pads to charging followed by constant voltage charging evaluate tantalum or ceramic capacitors. with automatic charge termination. Each board design provides evaluation in two package options: a SOT-23-5 and TC1016/17 LDO Linear Regulator a 8-lead 2x3 DFN for higher power handling capability. Evaluation Board MCP73833 Li-Ion Battery Charger Part Number: TC1016/17EV Evaluation Board This evaluation board contains two Part Number: MCP73833EV independent LDO circuits that allow the user to evaluate the TC1016 (80 mA) and TC1017 This evaluation and demonstration tool for (50 mA) devices in SC-70-5 and SOT-23-5 MCP73833/4 charge management controllers packages. The evaluation board is populated provides two independent circuits (only one is with 1.8V and 3.0V TC1017 devices. Any of the populated) for charging single cell Li-Ion/ available output voltage values of the devices (1.2V to 5.0V) can Li-Polymer battery packs (the battery packs be used on this board. are not included). Each circuit design provides constant current charging followed by constant voltage charging algorithm with automatic charge termination and battery temperature monitoring. The board provides for evaluation of two package options: a MSOP-10 (not populated) and a 10-lead 3x3 DFN for higher power handling capability. 8 NEW Low-Cost Development Tools Guide TC1303 DFN Adjustable Output Thermal Management Products Demonstration Board ™ MCP9700 Temperature-to-Voltage Converter PICtail Part Number: TC1303DM-DDBK2 Demonstration Board This demo board is used to evaluate the Part Number: MCP9700DM-PCTL TC1303C device over the input voltage range, This board demonstrates how to interface the output voltage and current range for both the MCP9700 to a MCU. This can be used by the synchronous buck regulator output and the low system designer as an example of how to integrate dropout linear regulator output. Test points are an analog temperature sensor into systems. provided to monitor the input voltage, output voltage, shut down control and power good signal. ™ MCP9800 Temperature Sensor PICtail Demonstration Board TC1303B Demonstration Board Part Number: MCP9800DM-PCTL Part Number: TC1303BDM-DDBK1 Demonstrates how to interface the MCP9800 The TC1303B Dual-Output Regulator with Power- to a PIC® MCU using the PICkit™ 1 Flash Good Output Demo Board can be used to evaluate Starter Kit as a platform. The demo board the TC1303B device over the input voltage range can also be used as a stand-alone module to and output current range for both the synchronous quickly add thermal sensing capability to any buck regulator output and the low-dropout linear existing application. regulator output. Test points are provided for input power, output loads, shutdown control and power-good monitoring. MCP9800 Temperature Data Logger Demonstration Board ™ PICDEM Low-Power Solutions Demonstration Board Part Number: MCP9800DM-DL Part Number: DM163026 Allows users to store up to 128000 This board explores PIC® microcontroller temperature readings from the MCP9800 nanoWatt features within a functional sensor to the 24LC1025, Microchip’s ultrasonic range-finder application. It 1024 Kbit EEPROM. A PIC16F684 MCU features the PIC18F4620 power managed communicates with the sensor and EEPROM. In addition, the PIC® device. MCU interfaces to a PC using the PICkit™ 1 Flash Starter Kit and transfers the temperature readings from the EEPROM to the PC. PICDEM™ MSC1 Switch Mode Power Supply (SMPS) Microsoft Excel® can be used to view the data. Daughter Board ™ TC72 Digital Temperature Sensor PICtail Part Number: AC163001 Demonstration Board In combination with the PICDEM MSC1 Demo Part Number: TC72DM-PICTL Board, this board is a complete demonstration and evaluation kit for designing switch mode Connects directly to the PICkit™ 1 Flash Starter power supplies using the PIC16C781/782. Kit. Highly accurate board features a 10-bit digital The daughter board can be confi gured for sensor with 3-wire SPI interface. the following switch mode power supply topologies: Boost: output voltage greater than the supply voltage, Buck: output voltage less than the supply voltage, Buck-Boost: output voltage less than or TC74 Serial Digital Thermal Sensor greater than the supply voltage and Invert: negative output voltages. Demonstration Board Part Number: TC74DEMO Particularly suited for low-cost, small form factor applications. Connects directly to the PICkit™ 1 Flash Starter Kit. ™ TC77 Thermal Sensor PICtail Demonstration Board Part Number: TC77DM-PICTL System designers can use this design as an example of how to integrate a digital temperature sensor into their systems. Connects directly to the PICkit™ 1 Flash Starter Kit. 9 NEW NEW NEW NEW NEW Low-Cost Development Tools Guide ® ® TC64X/64XB Fan Speed Controller PIC MCU and dsPIC DSC Demonstration Board Demonstration Boards Part Number: TC642DEMO Explorer 16 Development Board Fan control module allows users to quickly Part Number: DM240001 prototype fan control circuits based on the TC642 or TC646 PWM Fan Control ICs. It The Explorer 16 is a low-cost, efficient uses through hole components for easy user development board to evaluate the features and assembly and evaluation. performance of Microchip’s new 16-bit PIC24 MCU and dsPIC33 DSC families. Coupled with TC64X/64XB Fan Speed Controller Evaluation Board the MPLAB® ICD 2 In-Circuit Debugger, real-time Part Number: TC642EV emulation and debug facilities speed evaluation and prototyping of application circuitry. The board features two interchangeable Plug-In This is a complete evaluation board for evaluation and prototyping Modules (PIMs), PIC24FJ128GA010 and dsPIC33F128GP710. brushless DC fan control circuits using the TC642, TC646, TC647, TC648 and TC649 BDC fan controllers PICkit™ 2 Low Pin Count Demonstration Board TC650 Fan Controller Demonstration Board Part Number: DM164120-1 Part Number: TC650DEMO A small demo board with a PIC16F690 on board and a small prototype area. Use with Allows users to quickly prototype fan control circuits the PICkit 2 to program code via a 6-pin ICSP™ based on the TC650 or TC651 PWM Fan Control ICs. header on the board. The kit also includes two bare PCB boards for those interested in customizing their development. TC652 Fan Controller Demonstration Board Part Number: TC652DEMO PICkit™ 28-pin Demonstration Board Part Number: DM164120-3 Allows users to quickly prototype fan control circuits on TC652 or TC653 PWM Fan Control This small demo board comes populated with ICs. The board can interface with virtually any Microchip’s PIC16F888 28-pin microcontroller brushless DC fan. and includes a generous prototyping area. The kit also includes two bare boards for those TC1047A Temperature-to-Voltage Converter PICtail™ interested in customizing their development. Demonstration Board PICkit™ 44-pin Demonstration Board Part Number: TC1047ADM-PICTL Part Number: DM164120-2 Demonstrates how to interface the TC1047A A small demo board with a PIC16F917 MCU device to a MCU. Connects directly to the PICkit™ on board and a small surface mount prototype 1 Flash Starter Kit, providing a platform for code area. Use with PICkit 2 to program code via a development and evaluation. Provides a good 6-pin ICSP™ header on the board. This kit also example of how to integrate an analog temperature includes two bare PCB boards for those interested in customizing sensor into a system. their development. PT100 RTD Evaluation Board ™ dsPICDEM SMPS Buck Development Board Part Number: TMPSNS-RTD1 Part Number: DM300023 This board demonstrates how to bias a Resistive Temperature Detector (RTD) This development board implements a simple and accurately measure temperature. Up DC/DC Switch Mode Power Supply (SMPS) with a to two RTDs can be connected. The RTDs dsPIC30F2020 DSC and is a good starting point are biased using constant current source and the output voltage is for designers new to digital loop control design. scaled using a differential amplifier. The output is then connected Key features: dual independent buck converters, to a 12-bit differential Analog-to-Digital Converter (ADC) MCP3301. operable in synchronous or asynchronous modes, input voltage range The ADC outputs serial data to a PIC18F2550 device using a Serial 7-15V (nominal 9V), output voltage programmable: 0 to input voltage Peripheral Interface (SPI). The data is transmitted to a PC using a minus 1.5V. User can enable a dynamic output load to investigate USB interface. A Microsoft® Excel® macro is used as a Graphical transient response. User Interface (GUI) to acquire the data. The acquired data is stored ™ in an Excel Worksheet and graphed as a real-time stripchart display. PICDEM MC LV Development Board Part Number: DM183021 This board provides a cost-effective method of evaluating and developing sensored or sensorless brushless DC (BLDC) motor control applications. The board supports Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers and is capable of controlling motors rated up to 48V and 2.2 amps. This board is designed to work with the 24V BLDC motor (AC300020) and the 24V motor power supply (AC002013) to create a complete 24V BLDC development kit. 10 NEW Low-Cost Development Tools Guide ™ dsPICDEM 28-Pin Starter Demonstration Board Analog Blank Evaluation PCBs Part Number: DM300017 SOIC 8-Lead Evaluation Board This low-cost board allows users to easily validate Part Number: SOIC8EV a development tool setup using a 28-pin SDIP or SOIC dsPIC30F device. The board has a socketed A blank PCB to easily evaluate Microchip’s dsPIC30F2010 DSC, power supply regulator, 8-pin devices (in SOIC, DIP , MSOP and TSSOP crystal oscillator, ICD header, serial port, power packages). Each device pin is connected to on indicator, reset push-button, 28L SOIC layout a pull-up resistor, a pull-down resistor, an pad and a prototyping area. in-line resistor and a loading capacitor. The PCB pads allow through hole or surface mount connectors to ™ dsPICDEM 80-Pin Starter Development Board be installed to ease connection to the board. Additional passive component footprints are on the board, to allow simple circuits to be Part Number: DM300019 implemented. This board offers an economical way to evaluate both the dsPIC30F and dsPIC33F general purpose SOT-23-3 Voltage Supervisor Evaluation Board and motor control family of devices. An ideal Part Number: VSUPEV prototyping tool to help quickly develop and validate key design requirements. dsPIC30F6014A Quickly evaluates operation of Voltage and dsPIC33F Plug-In Modules are included. Supervisors and Voltage Detectors in the Microchip SOT-23-3 package. Generic board ™ evaluates SOT-23-3 devices (such as LDOs dsPICDEM 2 Demonstration Board and Voltage References). Four blank PCBs are Part Number: DM300018 included for testing multiple devices. A development and evaluation tool to help create embedded applications using dsPIC30F DSCs. SOT-23-5/6 Voltage Supervisor Evaluation Board Sockets are provided for 28- and 40-pin devices in Part Number: VSUPEV2 the motor control family and 18-, 28- and 40-pin This blank PCB allows quick evaluation of devices in the general purpose and sensor family. Voltage Supervisors and Voltage Detectors in the SOT-23-5 and SOT-23-6 packages. This PCB supports many Microchip devices, including the ™ PICDEM 2 Plus Demonstration Board non-volatile Digital Potentiometer and PIC10F2XX Part Number: DM163022 devices. A simple board that demonstrates the 14-Pin SOIC/TSSOP/DIP Evaluation Board capabilities of the 18-, 28- and 40-pin Part Number: VSUPEV PIC16XXXX and PIC18XXXX devices. It can be used stand-alone with a programmed part, with This 14-lead SOIC/TSSOP/DIP evaluation board MPLAB® ICE or with MPLAB ICD 2. allows system designers to quickly evaluate the operation of Microchip’s devices in either SOIC, DIP ™ PICDEM 4 Demonstration Board or TSSOP packages. Part Number: DM163014 A demonstration and evaluation board for the 8-, 14- and 18-pin general purpose products with power-management features. It comes with two pre-programmed Flash-based MCUs, the PIC18F1320 and PIC16F627A, which both feature nanoWatt Technology. ™ PICDEM Mechatronics Demonstration Board Part Number: DM163029 Learn how to use PIC® MCUs to enhance or replace a mechanical design. This demo kit takes a hands-on approach to learning about mechatronics. Jumper wires are provided in the kit and allow the user to experiment by connecting the PIC MCU to various components on the board. These components include sensors, LEDs, human input devices and motor drivers. The board comes with nine example projects and includes firmware, connection diagrams and schematics. 11 11 NEW Low-Cost Development Tools Guide Programmers MCU Software Tools ® ® MPLAB ICD 2 Debugger/Programmer MPLAB IDE Part Number: DV164005 Microchip’s FREE, integrated toolset for the development of PIC® MCU and dsPIC® DSC embedded applications. MPLAB IDE runs as A low-cost, all-in-one real-time debugger/ a 32-bit application on MS Windows, is easy to use and includes a programmer solution for selected PIC® MCUs. host of free software components for fast application development Programs can be downloaded, executed in real and debugging. MPLAB IDE also serves as a single, unified graphical time and examined in detail using the proprietary user interface for Microchip and third party software/hardware debug functions of MPLAB IDE. Watch variables development tools. and breakpoints can be set from symbolic labels in C or assembly source code, and single stepping can be done through C ® MPLAB C18 C Compiler source line, assembly code level, or from a mixed C source and A full-featured ANSI compliant C compiler for the PIC18F family generated assembly level listing. MPLAB ICD 2 can also be used of 8-bit PIC® MCUs. MPLAB C18 is a 32-bit Windows console as a development programmer for supported devices. application as well as a fully integrated component of MPLAB IDE, allowing source level debugging with the MPLAB ICE emulator, PIC10F2XX Universal Programmer Adapter the MPLAB ICD 2 debugger and the MPLAB SIM simulator. A full- Part Number: AC163020 featured 60-day demo of the MPLAB C18 compiler is available at Populates DIP-8 and SOT-23 sockets. www.microchip.com. 2x3 DFN socket unpopulated. ® Part Number: AC163020-2 MPLAB C30 C Compiler A fully ANSI-compliant C compiler with standard libraries for the Populates DIP-8 and 2x3 DFN PIC24 MCU and dsPIC® DSC architectures. Provides efficient sockets. SOT-23 socket unpopulated. software code generation and extensions that allow for excellent The PIC10F2XX Universal Programmer Adapter provides PIC10F support of the hardware, such as interrupts and peripherals. socket support for the SOT-23, 2x3 DFN and DIP-8 packages. It is fully integrated with the MPLAB IDE for high level, source It provides a simple interface to Microchip’s low-cost family of debugging. MPLAB C30 comes complete with its own assembler, programmers including: PICkit™ 1, PICkit™ 2, MPLAB® ICD 2 and linker and librarian, allowing users to write and link mixed mode C PICSTART® products. and assembly programs into a single executable file. A full-featured 60-day demo of the MPLAB C30 compiler is available at www. Analog Software Tools microchip.com. ® FilterLab Active Filter Design Software Application Maestro™ Software The FilterLab Active Filter Software Design A stand-alone module tool to configure and incorporate a range of tool simplifies active filter design and pre-written firmware modules into PIC® MCU applications. Using a provides full schematic diagrams of the graphic interface, select one or more modules, then configure the filter circuit with component values and parameters listed. The Application Maestro software generates displays the frequency response. A free code that can be incorporated into the application project, using download is available at the Microchip web MPLAB® IDE or any compatible development environment. site at: www.microchip.com ® MPLAB Visual Device Initializer MPLAB VDI graphically configures the microprocessor and SPICE Software Models peripherals, and when complete, generates code usable in Modeling is the heart of any SPICE simulation system and assembly language or C programs. MPLAB VDI does extensive error Microchip provides a variety of model libraries. This library and checking on assignments and settings, and generates an error service is an example of Microchip’s focus on analog simulation message if there are conflicts on any resources. and modeling. For more information, visit the Microchip web site at: www.microchip.com 12 12 NEW NEW Low-Cost Development Tools Guide ® dsPIC30F Asymmetric Key Embedded Encryption dsPIC DSC Evaluation Software Tools Library Digital Filter Design Lite Part Number: SW300055-EVAL Part Number: SW300001-LT A reliable security solution for embedded applications built on the This software package provides a subset of the functionality in the dsPIC30F platform. The Asymmetric-Key Embedded Encryption full version of Digital Filter Design. The differences between the library implements these functions: Public Key Encryption/ two versions is the number of supported FIR and IIR taps and the Decryption Functions, Key Agreement Protocol, Signing and presence of MATLAB support. Verification, Hash and Message Digest Functions and Random Number Generator (RNG). dsPIC30F Acoustic Echo Cancellation Library dsPIC30F Speech Recognition Library Part Number: SW300060-EVAL Part Number: SW300010-EVAL This library provides a function to eliminate echo generated in the acoustic path between a speaker and a microphone. Useful This library is speaker independent US English and provides voice for speech and telephony applications in which a speaker and control of embedded applications that require an alternative user a microphone are located in close proximity to each other, and interface. With a vocabulary of up to 100 words, the Speech susceptible to signals propagating from the speaker to the Recognition Library allows users to control their application vocally. microphone result in a perceptible and distracting echo effect. This library is an ideal front end for hands-free products. The library has very modest memory and processing requirements and is dsPIC30F Line Echo Cancellation Library targeted for the dsPIC30F5011/5013 and dsPIC30F6012/6014 Part Number: SW300080-EVAL processors. The dsPIC30F Line Echo Cancellation Library provides a function dsPIC30F Noise Suppression Library to eliminate echo generated in telephone or digital network Part Number: SW300040-EVAL components, such as telephone hybrids. Line echo cancellation Provides a function to suppress the effect of noise interfering with is applicable in telephony applications that involve transmitting a speech signal. This function is useful for microphone-based and receiving signals through a telephone hybrid and is especially applications that have a potential for incoming speech corruption suitable for: hands-free cell phone kits, speaker phones, intercoms, from ambient noise. It is especially suitable for systems where an teleconferencing systems and voice-over-internet protocol. This acoustically isolated noise reference is not available. library is fully compliant with the ITU-T G.168 standard for Digital Network Echo Cancellers. dsPIC30F V.32 (non-trellis) Soft Modem Library dsPIC30F Symmetric Key Embedded Encryption The Soft Modem libraries are composed of ITU-T compliant Library algorithms for V.21, V.22, V.22bis, V.23, V.32 and V.32bis modem Part Number: SW300050-EVAL recommendations. Bell standard 103 is also included in these libraries. A reliable security solution for embedded applications built on Part Number: SW300003-EVAL the dsPIC30F platform. The Symmetric Key Embedded Encryption Supports V.21, V.22, V.22bis, V.23, V.32 and V.32bis modem. library has the following features: Hash Functions, Symmetric-Key Encryption/Decryption Functions and Random Number Generator Part Number: SW300002 (Free Download) Functions. Supports V.21, V.22 and V.22bis modem. ® dsPIC DSC Speech Encoding/Decoding Library This library provides toll-quality voice compression and decompression to help generate speech-based embedded applications with three available options. Part Number: SW300026 (Free Download) Supports ITU-T G.711 (A-law/u-law) companding algorithm. Part Number: SW300090-EVAL Supports ITU-T G.726A (ADPCM) companding algorithm. Part Number: SW300070-EVAL Supports dsPIC® DSC SPEEX (CELP) companding algorithm. 13 Support Purchase Microchip is committed to supporting its customers microchipDIRECT is a microchip in developing products faster and more efficiently. We web-based purchasing maintain a worldwide network of field applications site that gives you DIRECT engineers and technical support ready to provide product www.microchipdirect.com 24-hour-a-day access to and system assistance. In addition, the following service all Microchip devices and areas are available at www.microchip.com: tools, including pricing, ordering, inventory and support. You can buy the products you need on an easily opened ■ Support link provides a way to get questions Microchip line of credit. answered fast: http://support.microchip.com ■ Sample link offers free evaluation samples of any Microchip device: http://sample.microchip.com ■ Training link offers webinars, registration for local seminars/workshops and information on annual MASTERs events held throughout the world: www.microchip.com/training Sales Office Listing Technical Support: http://support.microchip.com AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Atlanta Australia - Sydney India - Bangalore Austria - Wels Tel: 678-957-9614 Tel: 61-2-9868-6733 Tel: 91-80-4182-8400 Tel: 43-7242-2244-39 Boston China - Beijing India - New Delhi Denmark - Copenhagen Tel: 774-760-0087 Tel: 86-10-8528-2100 Tel: 91-11-4160-8631 Tel: 45-4450-2828 Chicago China - Chengdu India - Pune France - Paris Tel: 630-285-0071 Tel: 86-28-8665-5511 Tel: 91-20-2566-1512 Tel: 33-1-69-53-63-20 Cleveland China - Fuzhou Japan - Yokohama Germany - Munich Tel: 216-447-0464 Tel: 86-591-8750-3506 Tel: 81-45-471- 6166 Tel: 49-89-627-144-0 Dallas China - Hong Kong SAR Korea - Gumi Italy - Milan Tel: 972-818-7423 Tel: 852-2401-1200 Tel: 82-54-473-4301 Tel: 39-0331-742611 Detroit China - Qingdao Korea - Seoul Netherlands - Drunen Tel: 248-538-2250 Tel: 86-532-8502-7355 Tel: 82-2-554-7200 Tel: 31-416-690399 Kokomo China - Shanghai Malaysia - Penang Spain - Madrid Tel: 765-864-8360 Tel: 86-21-5407-5533 Tel: 60-4-646-8870 Tel: 34-91-708-08-90 Los Angeles China - Shenyang Philippines - Manila UK - Wokingham Tel: 949-462-9523 Tel: 86-24-2334-2829 Tel: 63-2-634-9065 Tel: 44-118-921-5869 Santa Clara China - Shenzhen Singapore 8-29/06 Tel: 408-961-6444 Tel: 86-755-8203-2660 Tel: 65-6334-8870 Toronto China - Shunde Taiwan - Hsin Chu Mississauga, Ontario Tel: 86-757-2839-5507 Tel: 886-3-572-9526 Tel: 905-673-0699 China - Wuhan Taiwan - Kaohsiung Tel: 86-27-5980-5300 Tel: 886-7-536-4818 China - Xian Taiwan - Taipei Tel: 86-29-8833-7250 Tel: 886-2-2500-6610 Thailand - Bangkok Tel: 66-2-694-1351 www.microchip.com/developmenttools Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199 Microcontrollers • Digital Signal Controllers • Analog • Serial EEPROM Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, MPLAB, PIC, PICmicro, PICSTART and rfPIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, MXDEV, MXLAB and SEEVAL are registered trademarks of Microchip Technology Incorporated in the U.S.A. Application Maestro, dsPICDEM, ICSP, PICkit, PICDEM and PICtail are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2006, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 11/06 DS51560D *DS51560D*