Manufacturers
MICRO/SYS SBC1670
Description
Micro/Sys SBC1670 CPU Board with PXA270 XScale PC/104, LCD Panel Support
Part Number
SBC1670
Price
Request Quote
Manufacturer
MICRO/SYS
Lead Time
Request Quote
Category
COMPONENTS
Specifications
10/100BASE-T Ethernet Port
10/100 Ethernet port. Standard RJ45 connector.
COM1-COM5 Serial Ports
Five async serial ports. 16C550-compatible. RTS and CTS modem controls on COM1-COM4. RS232 on COM1-COM4. Half-duplex RS485 on COM5 with jumperable termination.
CompactFlash Interface
Supports Type I or II CompactFlash. Not hot-swappable.
DK1670 Development Kit
Free with first SBC1670 purchase. Breakout cable to COM1-COM4. Download cable and utilities. Documentation, schematics, sample software.
Environmental
Operating range 0° to +70°C. ET-version operating range -40° to +85°C. -40° to +85°C storage. 5%-95% relative humidity, non-condensing.
External Connections
40-pin header for COM1-COM4, USB, JTAG. 40-pin high-density header for LCD. 8-pin modular RJ45 jack for Ethernet. 1/8” phono jacks for audio I/O. 2-pin locking header for reset. 3-pin removable terminal strip for power input.
JTAG Interface
Debug unit has hardware break points and 256-entry trace history buffer. IEEE 1149.1 JTAG compatible
Keypad I/O
Six input signals with pull-up resistors. Programmable debounce period. Interrupt generated on key press.
LCD Graphics Port
Interfaces to STN, DSTN, or TFT panels. Resolutions up to 800 x 600.
Mechanical
PC/104 standard. 3.55” (plus I/O region) x 3.775” x 0.6”. Installed CompactFlash card extends past edge of board opposite the PC/104 connector. If installed, Ethernet connector on top side has height of 0.453”. Components on the bottom side have a maximum height of 0.134”.
On-board Memory
64-128MB Synchronous DRAM. 32-64MB of linear flash for bootloader, operating system, and application.
PC/104 Interface
Non-stackthrough PC/104 connectors. Standard mounting holes. 8-bit and 16-bit PC/104 module support I/O accesses supported, memory accesses not supported. Stackthrough option available (SBCOPT16ST)
Power Requirements
+5v ±5% at 720mA max. Off-board 3.6v battery can supply power if sleep mode is enabled.
Processor Core Section
Intel PXA270. 312 or 520 MHz clock rate. StrongARM v5TE instruction set
USB Interface
USB v1.1. USB host controller.
Watchdog Timer
Program must refresh watchdog timer periodically, or system will be reset. Enabled through software.
Features
- 10/100BASE-T Ethernet
- 520MHz Low-power ARM processor
- 800 x 600 Color LCD interface
- Debounced keypad interface
- Extended temperature available
- Five serial ports
Datasheet
Extracted Text
XScale PC/104 Computer with LCD Panel Support SBC1670 Features 99999 520MHz Low-power ARM processor 99999 800 x 600 Color LCD interface 99999 10/100BASE-T Ethernet 99999 Five serial ports 99999 Debounced keypad interface 99999 Extended temperature available The SBC1670 packs a fast Intel XScale RISC card. Immediately and easily, an advanced engine processor with lots of memory into a is available for software development. PC/104-sized board. The efficient, industry- standard ARM architecture allows the SBC1670 With up to 64MB of onboard linear flash, and to draw little power at its full 520MHz clock speed. 128MB of SDRAM, many complex operating This reduces power supply and cooling systems, such as Linux and Windows CE can be requirements. Onboard I/O includes LCD support, run. However, if additional storage capacity is a debounced keypad interface, five serial required, the CompactFlash connector allows ports, 10/100BASE-T Ethernet, USB, and hundreds of megabytes of removable storage. CompactFlash. And, if additional capabilities are needed, In its stackthrough version, the SBC1670 is an PC/104 expansion allows a wide variety of I/O ideal computer to plug into a custom OEM I/O cards to be stacked on the SBC1670. Software Support Compatible Hardware Mounting/Packaging Linux PC/104 expansion cards Standoffs, STDOFF01 Windows CE [Items above in Section 4] [Items above in Section 5] VxWorks® ENC104-4 RS232/RS485 devices RTOS Custom FPKIT-6.4T C, compilers FPKIT-10.4T [Items above in Section 6] Custom Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com Ethernet Keypad LCD P C / EEPROM XScale (ARM) 1 CPU 0 4 128MB 64MB Compact I/ Flash SDRAM Flash O USB JTAG COM1-COM5 Technical Details: (SDRAM) is more than sufficient for many complex The SBC1670 core is an Intel PXA270 XScale processor running at up to 520 MHz. This variation programs and operating systems. of the industry-standard ARM architecture is a RISC processor that is designed for low-power The 64-Mbyte Flash memory contains the operation and still supports many user-interface bootloader, operating system, and user application code space. A portion of the flash can be allocated options. as a read/write flash drive. The PXA270 allows compatibility with 32-bit operating systems. The PXA270 also integrates If a larger program or data storage space is many peripherals. A host USB port, an interrupt required, or if removability is needed, the CompactFlash interface can provide hundreds of controller, three 16C550 UARTs, a watchdog timer, and an SDRAM controller are all present. megabytes of storage. Complex user interface needs can be met with Five serial ports allow communication with many the built-in LCD interface, keypad inputs, and different devices. COM1 through COM5 are 16C550-compatible UARTs (with transmit and audio I/O. The LCD interface supports STN, DSTN, and TFT panels up to 800 x 600 pixels. receive FIFOs). Of these serial ports, The six keypad inputs are debounced and can be COM1-COM4 have RS-232 transceivers, and used for digital I/O if not needed for switches. The have RTS and CTS modem control lines. COM5 audio interface has line-level inputs and outputs is set up for half-duplex RS-485 communication with jumperable termination resistors. and uses a standard AC97 CODEC. The memory subsystem on the SBC1670 allows The PC/104 connector provides support for both many programs to be run without any external 8-bit and 16-bit I/O expansion boards. The default storage. 128 Mbytes of synchronous DRAM configuration is non-stackthrough connectors, Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com allowing the SBC1670 to be the bottom card in a Processor Core Section: Intel PXA270 stack. The stackthrough option (SBCOPT16ST) 312 or 520 MHz clock rate allows the SBC1670 to be plugged into a custom-designed OEM I/O board as a StrongARM v5TE instruction set programmable controller. On-board Memory: 64-128MB Synchronous DRAM For application development, the SBC1670 32-64MB of linear flash for bootloader, supports a number of alternatives. 32-bit operating systems such as Linux and Windows CE can be operating system, and application booted on the SBC1670. All have full tool suites available, including compilers and debuggers. Watchdog Timer: Program must refresh watchdog timer Other operating systems may also be available. periodically, or system will be reset For pre-configured sets of options, Micro/sys can Enabled through software provide OEMs with a single part number for ordering. In addition, custom versions of the COM1-COM5 Serial Ports: Five async serial ports SBC1670 are available. Please call Micro/sys 16C550-compatible Technical Sales for details. RTS and CTS modem controls on COM1-COM4 Specifications: RS232 on COM1-COM4 Half-duplex RS485 on COM5 with Mechanical: jumperable termination PC/104 standard 3.55” (plus I/O region) x 3.775” x 0.6” 10/100BASE-T Ethernet Port: Installed CompactFlash card extends past 10/100 Ethernet port edge of board opposite the PC/104 Standard RJ45 connector connector If installed, Ethernet connector on top side LCD Graphics Port: has height of 0.453”. Components on the Interfaces to STN, DSTN, or TFT panels bottom side have a maximum height of Resolutions up to 800 x 600 0.134”. Keypad I/O: Power Requirements: Six input signals with pull-up resistors +5v ±5% at 720mA max Programmable debounce period Off-board 3.6v battery can supply power if Interrupt generated on key press sleep mode is enabled JTAG Interface: Environmental: Debug unit has hardware break points and Operating range 0° to +70°C 256-entry trace history buffer ET-version operating range -40° to +85°C IEEE 1149.1 JTAG compatible -40° to +85°C storage 5%-95% relative humidity, non-condensing USB Interface: USB v1.1 USB host controller Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com PC/104 Interface: SBC1670-520-ET PXA270 CPU, 520MHz, Non-stackthrough PC/104 connectors 64MB RAM, 32MB Flash, Standard mounting holes Ethernet, -40° to +85°C 8-bit and 16-bit PC/104 module support operating temperature I/O accesses supported, memory DK1670 No charge development accesses not supported kit, available with first Stackthrough option available order only SDK-Linux-1670 Linux Development kit (SBCOPT16ST) (must also purchase 1670OPT50) CompactFlash Interface: SDK-WinCE-1670 WinCE Development kit Supports Type I or II CompactFlash (must also purchase Not hot-swappable 1670OPT55) 1670OPT3 128MB SDRAM DK1670 Development Kit: 1670OPT6 64MB Flash Free with first SBC1670 purchase 1670OPT45 AC97 Audio Interface Breakout cable to COM1-COM4 1670OPT50 Bootloader and Linux in Download cable and utilities flash Documentation, schematics, sample 1670OPT55 Bootloader and sample software WinCE image in flash External Connections: Related Products: 40-pin header for COM1-COM4, USB, CA4124 Breakout cable to four DB9 JTAG COM port connectors 40-pin high-density header for LCD BA4124 Breakout assembly to four 8-pin modular RJ45 jack for Ethernet DB9 COM port connectors, 1/8” phono jacks for audio I/O RS485, USB, JTAG 2-pin locking header for reset SBCOPT16ST Stackthrough PC/104 3-pin removable terminal strip for power CF-FL128 128MB CompactFlash Card input CF-FL256 256MB CompactFlash Card CF-FL512 512MB CompactFlash Card Ordering Information: Cables nominally 15”, other lengths available Single Board Computer: VxWorks trademark Wind River SBC1670 PXA270 CPU, 312MHz, 64MB RAM, 32MB Flash, Ethernet SBC1670-520 PXA270 CPU, 520MHz, 64MB RAM, 32MB Flash, Ethernet SBC1670-ET PXA270 CPU, 312MHz, 64MB RAM, 32MB Flash, Ethernet, -40° to +85°C operating temperature Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SBC1670 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mirco/sys Extractor Tool - Extractor Tool for PC/104 Boards
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods