MICRO/SYS SBC1390
Specifications
COM1-COM4 Serial Ports
Four async serial ports, PC compatible. COM1, COM2 16450-compatible. COM3, COM4 16550-compatible. RTS and CTS modem controls. RS232 on all four channels. COM4 RS485 full duplex.
CompactFlash Interface
Supports Type I CompactFlash. Operates in True IDE mode. CF+ cards not supported. Not hot-swappable.
DK1390 Development Kit
Free with first SBC1390 purchase. Breakout cables to COM1-COM4. Download cable and utilities. Power cable pigtail. Documentation, schematics, sample software
Environmental
-40 ° - +85 °C storage. 5%-95% relative humidity, non-condensing.
External Connections
.50-pin header for COM1-COM4, Sync serial port, timer 2, and digital I/O. 10-pin header for power input.
Mechanical
PC/104 standard. 3.55” (plus I/O region) x 3.775” x .6”. Installed PCMCIA card extends past one side where I/O connector overhang allowed.
On-board Memory
16M DRAM based at 0, expandable to 32M. 1M of Flash at top of memory map with BIOS and operating system installed; 768k available for user application.
PC Card Interface Option
Supports type I, II, or III. 82365SL-compatible register set. Up to five memory windows. Up to two I/O windows. 16-bit cards supported. CardBus not supported.
PC/104 Interface
8-bit and 16-bit PC/104 module support. IRQ5-7, 9-11, 14, and IOCHCHK (NMI). DMA support for DRQ2 or DRQ6.
Power Requirements
+5v ±5% at TBD max. +12v required only if used by PC Card or PC/104 modules. -12v required only if used by PC/104 modules.
Processor
Intel 386EX
Processor Core Section
386EX CPU. 25 or 33 MHz clock rate. Includes three 16-bit timers. Dual 8259A interrupt controllers. Selectable DMA support – DRQ2 or DRQ6.
Real Time Clock
RTC with on-board battery. Driver software in BIOS. Optional enhanced accuracy real-time clock is accurate to ±4 min per year.
Synchronous Serial Port
One sync serial port, up to 6M baud. Consists of double-buffered 16-bit RX and TX shift registers, no protocol implemented.
Watchdog Timer
Program must refresh watchdog timer periodically, or system will be reset. Enabled through software.
Features
- 386EX, 25 or 33MHz
- CompactFlash connector
- Extended temperature range available
- Four serial ports
- Optional PC Card interface for Wi-Fi, modem, Ethernet, and other I/O
- Small, low cost, ready to run
- Up to 32MB DRAM
Datasheet
Extracted Text
386EX PC/104 Computer with CompactFlash and PCMCIA SBC1390 Features Small, low cost, ready to run 386EX, 25 or 33MHz Up to 32MB DRAM CompactFlash connector Optional PC Card interface for Wi-Fi, modem, Ethernet, and other I/O Four serial ports Extended temperature range available The SBC1390 packs a fast 386EX processor storage capacity is required, the CompactFlash with plenty of memory, and copious amounts of connector allows hundreds of megabytes of storage into a PC/104-sized board. The optional removable program and data storage. PC Card interface allows many different types of I/O to be added. Wi-Fi (802.11b) cards, modems, Four serial ports, five digital I/O lines, three or Ethernet interfaces can be plugged into the counter/timers, and a watchdog timer mean that PC Card slot. the SBC1390 won’t require any additional I/O for many applications. However, if additional With 1MB of on-board flash, accessible as a capabilities are needed, PC/104 expansion allows read/write disk, and up to 32MB of DRAM, many a wide variety of I/O cards to be stacked on the large programs can be run. However, if additional SBC1390. Software Support Compatible Hardware Mounting/Packaging DOS emulation, MSDOS 5.0, PC/104 expansion cards Standoffs, STDOFF01 RTOS [Items above in Section 4] [Items above in Section 5] ™ Comm library, CommBLOK RS232/RS485 devices Custom ™ PID loop library, PidBLOK , Custom C, compilers [Items above in Section 6] Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com RS232 Timers RS232 P Sync SIO RS232 RS485 CMOS I/O C COM1 / COM2 COM3 COM4 1 0 386EX 4 CPU Real- I/ 1MB 32MB Time Flash O SDRAM Clock PC Card Compact Interface Flash Technical Details: The SBC1390 core is an Intel 386EX processor CardBus is not supported. running at 25 or 33 MHz. The 386EX allows compatibility with both real mode and 32-bit The memory subsystem on the SBC1390 allows protected mode programs. The 386EX also many programs to be run without any external integrates many PC-compatible peripherals. Two storage. Up to 32 Mbytes of synchronous DRAM cascaded 82C59A interrupt controllers, dual (SDRAM) is more than sufficient for many 16C450 UARTs, three timer/counters (82C54 complex, protected-mode programs and compatible), and a two-channel DMA controller operating systems. are all present. The 386EX also integrates peripherals that are often needed in embedded The 1-Mbyte Flash memory chip contains both systems. Bi-directional digital I/O lines, a the BIOS and a user application code space. synchronous serial I/O unit, a chip-select unit, The user space can be configured as a 768k DRAM refresh controller, and a watchdog timer read/write flash disk. are all packed into the CPU chip. If a larger program or data storage space is The optional PC Card (PCMCIA) interface allows required, or if removability is needed, the many different devices to be plugged into the CompactFlash interface can provide hundreds SBC1390. Wireless networking capability can of megabytes of storage. be added with Wi-Fi (802.11b) cards. A modem can be plugged in to allow remote data or code The user byte-wide socket can accept a number transfers. Ethernet PC Cards allow connection of different devices. EPROM, 5v Flash, ® , or SRAM can all be plugged in. into a company’s wired network. Almost any DiskOnChip kind of 16-bit PC Card can be added as long as The SRAM can be battery-backed, which makes the operating system supports it. 32-bit for fast storage for data that is updated often. Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com The socket location is programmable for many SBC1390 are available. Please call Micro/sys different locations both above and below 1 Meg. Technical Sales for details. Four serial ports allow communication with many different devices. COM1 and COM2 are 16C450- Specifications: compatible UARTs. COM3 and COM4 are 16C550-compatible UARTs (with transmit and Mechanical: receive FIFOs). All four serial ports are capable � PC/104 standard of speeds up to 115200 baud, have RS-232 � 3.55” (plus I/O region) x 3.775” x .6” transceivers, and have RTS and CTS modem � Installed PCMCIA card extends past one control lines. Additionally, COM4 is configurable side where I/O connector overhang allowed for full-duplex RS-485 communication with jumperable termination resistors. Power Requirements: � +5v ±5% at TBD max The PC/104 connector provides support for both � +12v required only if used by PC Card or 8-bit and 16-bit expansion boards and operates PC/104 modules with standard PC/104 bus protocol and timing. � -12v required only if used by PC/104 modules The default configuration is non-stackthrough connectors, allowing the SBC1390 to be the Environmental: bottom card in a stack. The stackthrough option (SBCOPT16ST) allows the SBC1390 to be Part Number Airflow Operating Temp plugged into a custom-designed OEM I/O board as an automation component. SBC1390 0 Ifpm 0° to +70°C SBC1390-33 0 Ifpm 0° to +60°C The SBC1390 can support application SBC1390 with 0 Ifpm 0° to +60°C 1390OPT23 development under numerous strategies. If 16- SBC1390-33 200 Ifpm 0° to +70°C bit DOS or DOS-extended software is sufficient, Micro/sys offers a free DOS-compatible operating SBC1390-ET 230 Ifpm -40° to +85°C system preinstalled on the SBC1390. For a small royalty fee, true MSDOS 5.0 can be preinstalled. Powerful, cost-effective remote � -40° - +85°C storage debug capabilities are provided through Borland’s � 5%-95% relative humidity, non-condensing Turbo Debugger. Processor Core Section: For true 32-bit application development, the � 386EX CPU SBC1390 supports a number of alternatives. � 25 or 33 MHz clock rate Due to its PC compatibility, 32-bit real time � Includes three 16-bit timers ® operating systems (RTOS) such as PharLap � Dual 8259A interrupt controllers ® ETS and VxWorks can be booted on the � Selectable DMA support – DRQ2 or DRQ6 SBC1390. All support 32-bit linear protected mode operation, and have full tool suites available, including compilers and debuggers. On-board Memory: � 16M DRAM based at 0, expandable to 32M For pre-configured sets of options, Micro/sys � 1M of Flash at top of memory map with BIOS can provide OEMs with a single part number for and operating system installed; 768k ordering. In addition, custom versions of the available for user application Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com Watchdog Timer: DK1390 Development Kit: � Program must refresh watchdog timer � Free with first SBC1390 purchase periodically, or system will be reset � Breakout cables to COM1-COM4 � Enabled through software � Download cable and utilities � Power cable pigtail COM1-COM4 Serial Ports: � Documentation, schematics, sample software � Four async serial ports, PC compatible � COM1, COM2 16450-compatible External Connections: � COM3, COM4 16550-compatible � 50-pin header for COM1-COM4, Sync serial � RTS and CTS modem controls port, timer 2, and digital I/O � RS232 on all four channels � 10-pin header for power input � COM4 RS485 full duplex J2 Synchronous Serial Port: Main I/O Connector � One sync serial port, up to 6M baud Pin Signal Signal Pin � Consists of double-buffered 16-bit RX and 1 RX COM1 RTS COM1 2 TX shift registers, no protocol implemented 3 TX COM1 CTS COM1 4 5 N/C N/C 6 Real Time Clock: � RTC with on-board battery 7 GND RX COM2 8 � Driver software in BIOS 9 RTS COM2 TX COM2 10 � Optional enhanced accuracy real-time clock 11 CTS COM2 N/C 12 is accurate to ±4 min per year 13 N/C GND 14 15 RX COM3 RTS COM3 16 PC/104 Interface: 17 TX COM3 CTS COM3 18 � 8-bit and 16-bit PC/104 module support 19 N/C N/C 20 � IRQ5-7, 9-11, 14, and IOCHCHK (NMI) 21 GND RX COM4 22 � DMA support for DRQ2 or DRQ6 23 RTS COM4 TX COM4 24 CompactFlash Interface: 25 CTS COM4 N/C 26 � Supports Type I CompactFlash 2 N/C GND 28 7 � Operates in True IDE mode 29 GND TX+ COM4 RS485 30 � CF+ cards not supported 31 TX- COM4 RS485 RX+ COM4 RS485 32 � Not hot-swappable 33 RX- COM4 RS485 N/C 34 35 PC CARD SPEAKER GND 36 PC Card Interface Option: 37 Sync TX CLK Sync TX Data 38 � Supports type I, II, or III 39 Sync RX CLK Sync RX Data 40 � 82365SL-compatible register set 41 GND Timer 2 CLK 42 � Up to five memory windows 43 Timer 2 Gate Timer 2 OUT 44 � Up to two I/O windows 45 DIO P11 DIO P36 46 � 16-bit cards supported 47 DIO P10 DIO P13 48 � CardBus not supported 49 DIO P31 GND 50 Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com CommBLOK, PidBLOK, trademark Drumlin J5 IBM, PC trademark IBM Corp. Power Connector MSDOS, Microsoft trademark Microsoft Corp. Turbo Debugger trademark Borland International Pin Signal Signal Pin ® DiskOnChip trademark M-Systems 1+5V +5V 2 3 +12V +12V 4 5 -12V -12V 6 7Ext Batt GND 8 9GND GND 10 Ordering Information: Single Board Computer: SBC1390 386EX CPU, 25MHz, 16MB RAM, 1MB Flash SBC1390-33 386EX CPU, 33MHz, 16MB RAM, 1MB Flash SBC1390-ET 386EX CPU, 25MHz, 16MB RAM, 1MB Flash, extended temp operation DK1390 No charge development kit, available with first order only 1390OPT2 32MB RAM total 1390OPT15 Enhanced accuracy, extended temp real-time clock, can be installed on SBC1390 or SBC1390-ET 1390OPT23 PCMCIA (PC Card) slot, 0°C - 70°C operation only Accessories: CA4045 Power connector pigtail, 18" CA4092 Breakout cable for COM1- COM4, Sync serial port, digital I/O TB1485-1 RS485 Breakout board, use with CA 4092 RAM128 128k RAM device RAM512 512k RAM device SBCOPT16ST Stackthrough PC/104 PCC-WIFI11B 802.11b Wireless PCMCIA card CF-FL128 128MB CompactFlash Card CF-FL256 256MB CompactFlash Card CF-FL512 512MB CompactFlash Card Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the SBC1390 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods