Manufacturers
MICRO/SYS SBC1190
Description
Micro/Sys SBC1190 - PC/104 Controller with Analog, Digital, Serial, Ethernet, and Built-in O/S and Network Software
Part Number
SBC1190
Price
Request Quote
Manufacturer
MICRO/SYS
Lead Time
Request Quote
Category
COMPONENTS
Specifications
Analog Input Option
Eight 12-bit channels. ±1/2 LSB linearity. 6usec conversion time. 0 to +5V, 0 to +10V ±5V, ±10V input ranges. Software-programmable input range.
Analog Output Option
Four 12-bit outputs. 0 to +5V output range, all channels. ±1 LSB linearity. 12usec DAC settling time. Software-based update rate, approx. 5k per second
Digital I/O
24-programmable lines. 8-bit programmable input or output. TTL-compatible levels, 2.5mA drive. Implemented with 82C55.
DK1190 Development Kit
Free with first SBC1190 purchase. BIOS and DOS compatible O/S. “Implied AUTOEXEC.BAT” on reset. Directly executes programs written in C/C++, Pascal, BASIC. No modified libraries or locator utilities. Executes .EXE file from flash. Includes Turbo Debugger remote support. Download program to flash EPROM with XMODEM (using PROCOMM, etc.). Includes all cables and documentation, drivers, and sample programs.
Environmental
0° - +70°C operating. -40° - +85°C storage. 5%-95% relative humidity, non-condensing.
Ethernet Option:UDP/IP Network Version Ordered as Netsock/100 (refer to sep
10BASE-T twisted-pair interface. RJ45 connector on-board. Flash Setup configuration utility, including IRQ, IP address, and DHCP options. UDP/IP driver stack preloaded into flash. Implements subset of Winsock functions. SOCK_DGRAM (UDP datagram) and SOCK_RAW (low level) sockets supported. IP, UDP, ARP, DHCP, ICMP protocols supported. Dynamically linked with application program.
External Connections
5-pin pluggable terminal strip. 50-pin header for digital and analog I/O. 10-pin header, RS232 signals, each serial port. 14-pin header, COM-A RS485 serial port signals. RJ45 modular connector, 10BASE-T Ethernet.
Mechanical
PC/104 standard. 3.55" (plus I/O region) x 3.775" x .6".
On-board Memory
128K RAM, expandable to 512k. 512K Flash. JEDEC socket for battery-backed RAM or EPROM
PC/104 Interface
8-bit PC/104 module support. IRQ2-IRQ7 and IOCHCK (NMI). No DMA Support.
Power Requirements
+5V ± 5% at 200mA, no options. +5V ± 5% at 380mA, all options.
Processor
Intel 80C188EB
Processor Core Section
80C188EB CPU. 12, 20, and 25MHz clock rate. Includes three 16-bit timers. Integrated interrupt controller.
Real Time Clock
Date and time, battery-backed. 31 bytes of battery-backed RAM. BIOS support.
Serial Ports
Two async ports in 80C188EB device. RTS and CTS modem controls. Separate RS232 connectors, COM-A RS485 connector. 7, 8, or 9-bit operation. Separate programmable baud rate generators. Not PC-software-compatible at register level. BIOS includes INT 14 polled support. CommBLOK library available for interrupt driven support.
Watchdog Timer
Program must refresh watchdog timer periodically, or system will be reset. Enabled by jumper
Features
- 24 TTL-compatible I/O lines
- 5V-only operation
- 8 Analog in, 4 analog out (optional)
- Onboard Flash downloader and operating systems
- Ready-to-run embedded PC
- Small PC/104 format and expansion
- Two RS232/RS485 COM ports
- UDP/IP Network Version available
Datasheet
Extracted Text
PC/104 Controller with A/D,D/A,Serial, Built-in O/S,Network Software SBC1190 Features Ready-to-run embedded PC Small PC/104 format and expansion Two RS232/RS485 COM ports 24 TTL-compatible I/O lines 8 Analog in, 4 analog out (optional) UDP/IP Network Version available Onboard Flash downloader and operating systems 5V-only operation The SBC1190 is a small embeddable PC that The SBC is full turnkey. Factory-installed in flash includes a large mix of I/O and firmware on a memory are an application download utility, Flash single PC/104-sized module. Based on a cost- Setup™ configuration utility, and the free effective Intel 188 processor, the SBC1190 core RUN.EXE operating system. Apply 5V, and the includes system RAM, flash EPROM, serial ports, SBC1190 prints a sign-on message and awaits battery-backed real-time clock, watchdog timer, further instructions. and PC/104 expansion. Many applications can be completely implemented with the SBC1190 For Networking SBC1190s on Ethernet UDP/IP by itself. A set of 24 TTL I/O lines, and optional networks, a special version of the SBC1190 is 12-bit analog input and analog output provide the available. This product, Netsock/100™, adds a designer with a wealth of control and monitoring 10BASE-T Ethernet port, and a free, preloaded possibilities. UDP/IP stack to the SBC1190 Software Support Compatible Hardware Mounting/Packaging ™ DOS emulation, RUN.EXE PC/104 expansion cards Enclosure, ENC104-3 ™ Turbo Debugger [Items above in Section 4] Standoffs, STDOFF01 ™ Comm library, CommBLOK RS232 devices [Items above in Section 5] ™ PID loop library, PidBLOK , Ethernet Networks Custom C, BASIC, compilers Analog sensors [Items above in Section 6] Analog controls UDP/IP Networks Custom Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com 128K/512K 82C55 A/D and D/A P RAM Parallel I/O Options C 512k / flash 1 EPROM Ethernet 80C188EB 0 (Netsock/100 4 128k version only) Socket W'dog I/ Counter/ O COM1 COM2 Timers RS232 RS232 RS485 Specifications: On-board Memory: � 128K RAM, expandable to 512k Mechanical: � 512K Flash � PC/104 standard � 3.55" (plus I/O region) x 3.775" x .6" � JEDEC socket for battery-backed RAM or EPROM Power Requirements: Serial Ports: � +5V ± 5% at 200mA, no options � Two async ports in 80C188EB device � +5V ± 5% at 380mA, all options � RTS and CTS modem controls � Separate RS232 connectors, COM-A Environmental: RS485 connector � 0° - +70°C operating � 7, 8, or 9-bit operation � -40° - +85°C storage � Separate programmable baud rate � 5%-95% relative humidity, non-condensing generators � Not PC-software-compatible at register Processor Core Section: level � 80C188EB CPU � BIOS includes INT 14 polled support � 12, 20, and 25MHz clock rate � CommBLOK library available for interrupt- � Includes three 16-bit timers � Integrated interrupt controller driven support Digital I/O: Watchdog Timer: � 24-programmable lines � Program must refresh watchdog timer � 8-bit programmable input or output periodically, or system will be reset � Enabled by jumper � TTL-compatible levels, 2.5mA drive � Implemented with 82C55 Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com Ethernet Option: J4 COM-A and J3 COM-B UDP/IP Network Version Ordered as Serial Port Connector/Cable Netsock/100 (refer to separate data sheet) Pin RS232 DB9 Pin � 10BASE-T twisted-pair interface 11 � RJ45 connector on-board � Flash Setup configuration utility, including 26 IRQ, IP address, and DHCP options 3RX Data In 2 � UDP/IP driver stack preloaded into flash 4RTS Out 7 � Implements subset of Winsock functions TX Data Out 3 5 � SOCK_DGRAM (UDP datagram) and 6CTS In 8 SOCK_RAW (low level) sockets supported 7 4 � IP, UDP, ARP, DHCP, ICMP protocols 89 supported 9GND 5 � Dynamically linked with application program 10 -- External Connections: Real Time Clock: � 5-pin pluggable terminal strip � Date and time, battery-backed � 50-pin header for digital and analog I/O � 31 bytes of battery-backed RAM � 10-pin header, RS232 signals, each serial � BIOS support port � 14-pin header, COM-A RS485 serial port PC/104 Interface: signals � 8-bit PC/104 module support � RJ45 modular connector, 10BASE-T � IRQ2-IRQ7 and IOCHCK (NMI) Ethernet � No DMA Support Analog Input Option: � Eight 12-bit channels J5 RS485 � ±1/2 LSB linearity Misc. Connector � 6usec conversion time Signal Pin Pin Signal � 0 to +5V, 0 to +10V ±5V, ±10V input GND 1 2 RS485TX+ ranges RS485TX- 3 4 RS485RX+ � software-programmable input range RS48 RX- 6P2. 5 5 5 -- 7 8+5V Analog Output Option: � Four 12-bit outputs Timer 0 In 9 10 Timer 0 Out � 0 to +5V output range, all channels Timer 1 In 11 12 Timer 1 Out � ±1 LSB linearity GND 13 14 BOOTSWAP � 12usec DAC settling time � Software-based update rate, approx. 5k per second Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com I/O Connector Ordering Information: Signal Pin Pin Signal PA0 1 2 PA1 Single Board Computer: PA2 3 4 PA3 SBC1190 80C188EB CPU, 12MHz, PA4 5 6 PA5 128K RAM, 512K Flash SBC1190-20 80C188EB CPU, 20MHz, PA6 7 8PA7 128K RAM, 512K Flash PB0 9 10 PB1 SBC1190-25 80C188EB CPU, 25MHz, PB2 11 12 PB3 128K RAM, 512K Flash PB4 13 14 PB5 DK1190 No charge development kit, PB6 15 16 PB7 available with first order only PC0 17 18 PC1 PC2 19 20 PC3 Netsock/100 SBC1190-25 with built-in UDP/IP networking (refer to PC421 22PC5 separate data sheet) PC6 23 24 PC7 GND 25 26 GND 1190OPT3 512K static RAM Upgrade AOUT0 27 28 GND 1190OPT11 A/D Converter, 8-Channel AOUT1 29 30 GND 1190OPT12 D/A Converter, 4-Channel AOUT2 31 32 GND AOUT3 33 34 GND AIN7 35 36 GND Accessories: AIN6 37 38 GND MPCxxx All Micro/sys PC/104 cards AIN 39 40 GND 5 CA4020 RS232 cable to male 9-pin D AIN4 41 42 GND connector AIN3 43 44 GND CA5049 50-pin header to 50-pin header AIN2 4 46 GND 5 TB5001 Breakout panel, 50-pin header AIN1 47 48 GND to terminal strips AIN0 49 50 GND ENC104-3 Metal enclosure for SBC1190 plus 3 PC/104 add-ons DK1190 Development Kit: � Free with first SBC1190 purchase Cables nominally 15", other lengths available � BIOS and DOS compatible O/S � “Implied AUTOEXEC.BAT” on reset � Directly executes programs written in RUN.EXE, BIOS Boss, Flash Setup, Embedded Netsock C/C++, Pascal, BASIC trademark Micro/sys, Inc. CommBLOK, PidBLOK, OptoBLOK trademark Drumlin � No modified libraries or locator utilities IBM, PC trademark IBM Corp. � Executes .EXE file from flash MSDOS, QuickBASIC, Microsoft trademark Microsoft Corp. � Includes Turbo Debugger remote support Turbo Pascal, Turbo Debugger trademark Borland � Download program to flash EPROM with International XMODEM (using PROCOMM, etc.) � Includes all cables and documentation, drivers, and sample programs Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SBC1190 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mirco/sys Extractor Tool - Extractor Tool for PC/104 Boards
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods