Manufacturers
MICRO/SYS OPTO104
Description
Micro/Sys OPTO/104 - Optically Isolated Analog and Digital I/O Module Rack On EPIC-Footprint
Part Number
OPTO104
Price
Request Quote
Manufacturer
MICRO/SYS
Lead Time
Request Quote
Category
COMPONENTS
Specifications
Alphanumeric LCD Interface
Connects to a wide variety of alphanumeric displays. 8-data lines and RS, RW, and CE control lines. On-board or off-board contrast adjustment.
CAN Bus
Uses Intel 82527 CAN controller. Supports CAN specification 2.0, Parts A and B. Jumper selectable termination.
Dallas Probe Interface
Connects to Dallas iButton Probe. 1-Wire interface.
DC-DC Converter Input
DC-DC converter option at power input allows wide voltage ranges (9-18V, 18-36V, 36-75V). Isolates OPTO104 from power supply input voltage. On-board jumper can bleed off static charge from the output (caused by common-mode leakage current) to the safety ground or the -IN. This lowers the susceptibility to ESD.
Environmental
-40 - +85°C operating. -40 - +85°C storage. 5%-95% relative humidity, non-condensing.
External Connections
Two 8-point screw terminal strips for isolated I/O. Two 5-point screw terminal strips for non-isolated I/O. One 26-pin header for local/remote OPTO bus. One 6-point screw terminal strip for a rotary encoder and Dallas iButton Probe. One 16-pin header for a matrix keypad. One 34-pin header for an alphanumeric LCD. One 3-pin header for off-board LCD contrast potentiometer. One 3-point screw terminal strip for CAN bus.
Keypad Interface
4 x 4 matrix keypad. 10k pull-ups to +5V.
Mechanical
EPIC-footprint board size with corner mounting holes. 4.53” x 6.50” x 0.6” (If OPTO modules are installed, the height may be as much as 2.55”)
Onboard Temperature Sensor
Dallas DS75U temperature sensor. Measures board temperatures of –40° to +85°C.
PC/104 Interface
8-bit PC/104 transfers with 16-bit pass-through connector. Jumper selectable base address range from 000h to 3F0h. Occupies 16 byte-wide addresses
Power Requirements
OPTO104 +5v ±5% at 300mA Max, plus current needed for installed I/O modules. Board with 8 modules installed 500mA Max. OPTO104-12 9-18V. OPTO104-24 18-36V. OPTO104-48 36-75V.
Rotary Encoder Interface
Provides general-purpose quadrature input. Connects to Grayhill 61K128-050 or equivalent.
Watchdog Timer
1.6 second timeout. Resets all output modules upon timeout.
Features
- Accepts up to eight G4 or G5 OPTO modules for isolated digital and analog I/O
- CAN bus
- General-purpose status LEDs
- LCD/keypad interface
- Onboard temperature sensor
- Remote slave OPTO104 boards can be added via a ribbon cable
- Rotary encoder input
- Wide supply voltage range
Datasheet
Extracted Text
Optically Isolated Analog and Digital I/O Module Rack On EPIC-Footprint OPTO104 Features 99999 Accepts up to eight G4 or G5 OPTO modules for isolated digital and analog I/O 99 999 Remote slave OPTO104 boards can be added via a ribbon cable 99999 Rotary encoder input 99 999 LCD/keypad interface 99 999 CAN bus 99999 Wide supply voltage range 99 999 General-purpose status LEDs 99 999 Onboard temperature sensor The OPTO104 is a user-configurable I/O board The OPTO104 has a CAN bus interface and an ideal for use in industrial systems requiring high onboard temperature sensor. The CAN interface voltage isolation for analog and digital I/O. allows digital I/O, analog I/O, control commands, Standard PC/104 CPU boards plug onto the and temperature data to be easily communicated OPTO104. It accepts up to eight optically-isolated in a factory. I/O modules. The G4 module series provides either AC or DC I/O with a wide range of voltages. The OPTO104 also provides hardware interfaces The G5 module series provides an analog to a wide variety of industrial-user interface interface for voltage or temperature devices. These devices include a rotary encoder, measurements. an alphanumeric LCD, a keypad, and onboard general-purpose LEDs. Software Support Compatible Hardware Mounting/Packaging Example software included Any Micro/sys CPU with Enclosure, ENC104-4 PC/104 expansion connector Standoffs, STDOFF104 for DOS, Linux Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com Eight Keypad LCD OPTO P Modules Rotary Encoder C & Dallas Probe / 1 CAN Bus 0 4 Isolated Local/Remote Temperature DC-DC Bus Sensor Converter Specifications: Mechanical: DC-DC Converter Input: EPIC-footprint board size with corner DC-DC converter option at power input mounting holes allows wide voltage ranges (9-18V, 4.53” x 6.50” x 0.6” (If OPTO modules are 18-36V, 36-75V) installed, the height may be as much as Isolates OPTO104 from power supply 2.55”) input voltage On-board jumper can bleed off static Power Requirements: charge from the output (caused by OPTO104 +5v ±5% at 300mA Max, plus common-mode leakage current) to the current needed for installed I/ safety ground or the -IN. This lowers the O modules. Board with 8 susceptibility to ESD. modules installed 500mA Max. OPTO Modules: OPTO104-12 9-18V Accepts eight G4 or G5 modules OPTO104-24 18-36V Digital and analog modules may be mixed Up to 4000 volts of opto-isolation OPTO104-48 36-75V Remote (having no CPU) OPTO104 boards may be connected with 26-wire Environmental: ribbon cable -40 - +85°C operating -40 - +85°C storage Alphanumeric LCD Interface: 5%-95% relative humidity, non-condensing Connects to a wide variety of alphanumeric displays PC/104 Interface: 8-data lines and RS, RW, and CE control 8-bit PC/104 transfers with 16-bit pass-through connector lines Jumper selectable base address range On-board or off-board contrast adjustment from 000h to 3F0h Occupies 16 byte-wide addresses Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com External Connections: PC/104 Two 8-point screw terminal strips for CPU Local isolated I/O Two 5-point screw terminal strips for non-isolated I/O One 26-pin header for local/remote OPTO bus One 6-point screw terminal strip for a rotary Remote encoder and Dallas iButton Probe One 16-pin header for a matrix keypad One 34-pin header for an alphanumeric LCD One 3-pin header for off-board LCD contrast potentiometer One 3-point screw terminal strip for CAN Remote bus Ordering Information: Keypad Interface: 4 x 4 matrix keypad OPTO104 8 G4/G5 module sockets, 10k pull-ups to +5V CAN bus, 5V input voltage OPTO104-12 8 G4/G5 module sockets, CAN Bus: CAN bus, 9-18V input voltage Uses Intel 82527 CAN controller OPTO104-24 8 G4/G5 module sockets, Supports CAN specification 2.0, Parts A CAN bus, 18-36V input and B voltage Jumper selectable termination OPTO104-48 8 G4/G5 module sockets, CAN bus, 36-75V input Rotary Encoder Interface: voltage Provides general-purpose quadrature input Related Products: Connects to Grayhill 61K128-050 or CA5050 34-pin to 34-pin ribbon equivalent cable CA5051 26-pin to 26-pin ribbon cable Watchdog Timer: LC0240 2 line by 40 character LCD 1.6 second timeout CA4129 OPTO104 to LC0240 cable Resets all output modules upon timeout KEYPAD16 Keypad, 4 x 4, Customizable Legends Dallas Probe Interface: CA4130 OPTO104 to KEYPAD16 Connects to Dallas iButton Probe cable 1-Wire interface STDOFF104 Two .6” nylon standoffs, machine screws, and nuts for Onboard Temperature Sensor: mounting Dallas DS75U temperature sensor OMD-xxx Opto-isolated digital modules Measures board temperatures of –40° to from Opto 22 and Grayhill. +85°C See OMD-xxx data sheet for details Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com OMA-xxx Opto-isolated analog modules from Grayhill. See OMA-xxx data sheet for details Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the OPTO104 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mirco/sys Extractor Tool - Extractor Tool for PC/104 Boards
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods