High Accuracy Analog and Digital I/O for PC/104 MPC560 Features 32 channels of 16-bit analog input Fault protection on analog/digital Ultra-low noise design DSP and noise analysis software Low-pass filtering 14-bit, 4-channel DAC Digital I/O, Counter/Timer 5V only operation from PC/104 Extended temperature range available The MPC560 provides up to 32 single-ended 16- The optional 14-bit analog outputs have full- bit analog inputs that are fault protected to ±40V. scale output of ±10.1V. The digital-to-analog The analog input section offers individual channel converter is noise-protected by a faraday shield. selection of single-ended or differential modes in Each output has a 1-pole lowpass filter. any combination. The MPC560 also features basic and autoscan modes. Basic mode directly Twelve digital I/O lines can be individually set for controls all modes, gains, channel selection, and input or output, with fault protection against power filters. With autoscan mode, a user can preset sequencing and static discharge. individual channel attributes – channel on/off, mode, gain, and lowpass filter in on-board RAM. All analog power supplies are generated from the 5V input. The on-board analog supplies In autoscan mode, a pacer clock and the DMA include input and output filtering, and post- controller automatically move samples to system regulation of the initial converters, providing low- memory. The analog input includes a low-drift noise and stable power. reference, noise-protected by a faraday shield. Software Support Compatible Hardware Mounting/Packaging Example code for all Any Micro/sys CPU with PC/104 standard functions PC/104 expansion connector ™ C-code/Mathcad for advanced algorithms Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com DIO, CTR, TMR 4 Channels AO 12 Lines Filter/ ESD Buffer P C/ 14 bit FPGA, Read, DAC 1 Write, IRQ, DMA 0 Power Ref 16 bit 4 Supply A/D Fault Protection, MUX, GAIN, LPF 32 Channels AI Analog Inputs: Specifications: � 16-bit, 32-channels individually selected for single/differential Mechanical: � ADC conversion time of 5usec � PC/104 standard � -3dB typical full-power response of input � 3.55" (plus I/O region) x 3.775" circuitry: 20Vpp @35kHZ, 5Vpp @ 100kHZ Power Requirements: � Each channel can be set by software for the � +5V ± 5% at 500mA following attributes: on/off, single/differential, input range of Environmental: ±5.05V or ±10.1V, � 0° - +70°C operating Lowpass filter(1kHz or 100kHz) � -40° - +85°C operating, -ET version � Default Basic Mode from reset allows � 5%-95% relative humidity, non-condensing readings of individual channels from software directly with EOC being Polled/IRQ. PC/104 Interface: � Auto-scan Mode waits for an ext-trigger or � 16-bit transfers software to start the pacer-clock to � IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 systematically run through each channel supported with its preset values and store the data into � DMA 5, 6, 7 supported CPU DRAM with DMA Digital I/O: Analog Outputs: � 12 Multi-function TTL-level bit selectable � 14-bit, 4-channels I/O at 8mA sink/source � 10usec DAC settling time � Ext-trigger, Ext-pacer clock, User I/O � Each channel has a 1-pole reconstruction � Any/all inputs can generate an IRQ filter and output buffer � Read-back function on outputs � ±10.1V output Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com Counter/Timer: � 1Mhz 16-bit timer for pacer-clock External Connections: � 50-pin header for analog input � 16-pin header for digital/counter/timer I/O � 10-pin header for analog output Ordering Information: MPC560 16-bit, 16-channel analog input, digital I/O MPC560-ET 16-bit, 16-channel analog input, digital I/O, extended temperature operation 560OPT11 16-bit, 32-channel analog input, digital I/O 560OPT12 14-bit, 4-channel analog output Add -ET to option for extended temp operation Related Products: CA5049 50-pin to 50-pin ribbon cable CA4002 16-pin to 16-pin ribbon cable CA5052 10-pin to 10-pin ribbon cable TB5001 Breakout Board, 50-point terminal strip Mathcad trademark MathSoft Engineering and Education, Inc. Micro/sys 3730 Park Place, Montrose, CA 91020 (818)244-4600 Fax (818)244-4246 email: info@embeddedsys.com