F4 Data Sheet - 2004-10-27 F4 - 3U CompactPCI PowerPC Peripheral SBC u PowerPC MPC8245/300MHz u 1-slot 32-bit peripheral slot card u 1 MB ultra-fast DPRAM u 256 MB DRAM, CompactFlash u Graphics via PC-MIP u Ethernet via PC-MIP u 2 COMs, IDE, USB, keyboard/mouse u 2 PC-MIP slots u Option: 4 RS232 and 100Base-T with 5 RJ45 The F4 is a high-speed Kahlua II PowerPC-based functionality on one slot and includes two PC-MIP CompactPCI CPU card optimized for industrial slots for further I/O extensions. The F4 has a non- requirements in control and instrumentation in terms transparent PCI-to-PCI bridge and acts as a peripheral of functionality, environmental conditions and cost. board on the CompactPCI bus. It is especially prepared for all types of industrial Using an adapter in double PC-MIP format (AD45) the F4 qualification such as extended temperature range (-40 functionality can be extended by four RS232 UARTs and to +85°C), shock, vibration, humidity etc., and is 100Base-T Ethernet. The signals are available at the thus the optimum choice for the most extreme front via five RJ45 connectors. The F4 in this environmental conditions: railroad, ship and aerospace configuration still needs only one slot on the applications.CompactPCI bus (see Related Products and AD45 data The F4 provides full single-board computing sheet). ® 1 Embedded Solutions F4 Data Sheet - 2004-10-27 Technical Data CompactPCI Bus Mechanical Specifications • Compact PCI peripheral slot • Dimensions: conforming to CompactPCI specification for 3U · PICMG Spec. 2.0 R3.0 compliant boards · 32-bit data bus • Weight: 215g · 33MHz Environmental Specifications • V(I/O): +3.3V or +5V (Universal Board) • Temperature range (operation): • Concurrent primary and secondary bus operation · 0..+60°C or -40..+85°C • I2O message unit · Airflow: min. 10m³/h CPU • Temperature range (storage): -40..+85°C • PowerPC MPC8240 @ 250MHz • Relative humidity range (operation): max. 95% • PowerPC MPC8245 up to 400MHz on request non-condensing • Core voltage 2.5V (MPC8245: 1.8V) • Relative humidity range (storage): max. 95% non-condensing • Altitude: -300m to + 3,000m Memory • Shock: 15g/0.33ms, 6g/6ms • Level 1 Cache integrated in MPC824x • Vibration: 1g/5..2,000Hz • 100 MHz memory bus operation • SDRAM SO-DIMM up to 256MBSafety · 64 bits • PCB manufactured with a flammability rating of 94V-0 by • Flash 2MB UL recognized manufacturers · 8 bits EMC • Serial EEPROM 4Kbit • Tested according to EN 55022 (radio disturbance), · For factory settings IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to • CompactFlash (TM) interface (true IDE) CE conformity Interfaces Software Support • Two serial COM ports • MENMON · Physical interface using SA adapter via 10-pin ribbon • VxWorks cable · RS232..RS485, isolated or not: for free use in system (cable to front or back) • IDE • Keyboard/mouse • USB PC-MIP Extension • Two PC-MIP mezzanine extension slots at front panel • Compliant with PC-MIP specification (Type I/II slots) Miscellaneous • Real-time clock with 8k NVRAM • Hardware monitor and watchdog for on-board temperature control • Hex switch for user settings Electrical Specifications • Supply voltage/power consumption: · +5V (4.75V..5.25V), 2A · +3.3V (3.0V..3.6V), 0.8A • MTBF: 88,000h @ 50°C ® 2 Embedded Solutions F4 Data Sheet - 2004-10-27 Diagram ® 3 Embedded Solutions F4 Data Sheet - 2004-10-27 Related Products Standard Hardware 02F004-00 F4, CompactPCI 3U, peripheral card, MPC8240/250MHz, 2MB Flash, no DRAM, 2 PC-MIP slots, 1-slot front panel 02F004-01 F4, CompactPCI 3U, peripheral card, MPC8240/250MHz, 2MB Flash, no DRAM, 2 PC-MIP slots, 1-slot front panel, temperature range: -40..+85°C Please refer to our 3U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0701-0009 Abk13.10.04 - nur intern; Preis wird nicht erhBuy:offen fexistierende Kunden Last Delivery:offen fexistierende Kunden Name: B.Schmitz Grund: Ersatz-Standardsystem 0701-0021 kann falle 3U-Karten verwendet werden ------------------------------------------------------------CompactPCI 19" 3U rack-mount enclosure, 3U 7-slot CompactPCI backplane, ATX power supply 0701-0018 CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 8-slot 3U CompactPCI backplane, system slot right, no rear I/O, space for hard-disk drive, floppy drive, 300W ATX power supply wide range 100..240VAC on front, 1U fan tray included Accessories 05F001-00 Mounting kit for 2 SA adapters for F1/F1N/F4, incl. 3U 1-slot CompactPCI front panel and ribbon cable, without SA adapters 05F003-03 IDE adapter cable, 44-pin 2-mm IDE connection to 2x 44-pin 2-mm IDE connection, 450mm 0500-0002 Battery M4T28... for Timekeeper M48T86 (spare part) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C ® 4 Embedded Solutions F4 Data Sheet - 2004-10-27 Related Products 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0036 64MB DRAM 0..+60°C for 02F004-00 0752-0037 128MB DRAM 0..+60°C for 02F004-00 0752-0038 256MB DRAM 0..+60°C for 02F004-00 0752-0097 256MB DRAM -40..+85°C for 02F004-01 08AD45-05 AD45, double PC-MIP, DS21143 Ethernet controller, 10/100Mbit/s, 100Base-T, quad RS232 UART 16450 with 128-byte FIFO, with front panel for 3U CompactPCI boards, 0..+60°C 08AD45-06 AD45, double PC-MIP, DS21143 Ethernet controller, 10/100Mbit/s, 100Base-T, quad RS232 UART 16450 with 128-byte FIFO, with front panel for 3U CompactPCI boards, -40..+85°C 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA01-03 Serial interface adapter for F1/F1N/F4/B11, RS232, not optically isolated, for direct mounting on CPU board, 0..+60°C (N.B.: Standard adapters can only be mounted using MEN's mounting kit.) 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 14F004-00 MENMON (Firmware) for F4 (object code) You can download the data sheet for the MENMON firmware for PowerPC platforms from MEN's website. Documentation 20AD45-00 AD45 user manual ® 5 Embedded Solutions F4 Data Sheet - 2004-10-27 Related Products 20F004-00 F4 user manual 21APPN003 Application Note: Using P1/P501 Graphics on MEN 824x/ALI boards under ELinOS For the most up-to-date ordering information and direct links to other data sheets and downloads, see the F4 online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 6 Embedded Solutions