F1N Data Sheet - 2004-10-27 F1N - 3U CompactPCI PowerPC SBC u PowerPC MPC8245/300MHz u 1-slot 32-bit CompactPCI system master u 1MB ultra-fast DPRAM u 256MB DRAM, CompactFlash u Graphics via PC-MIP u Ethernet via PC-MIP u 2 COMs, IDE, USB, keyboard/mouse u 2 PC-MIP slots u Option: 4 RS232 and 100Base-T with 5 RJ45 The F1N is a high-speed PowerPC-based CompactPCI CPU for flexible and individual workstation I/O extensions card optimized for industrial requirements in control such as graphics, SCSI, additional serial lines, field and instrumentation in terms of functionality, busses etc. and various board and system control environmental conditions and cost. It is especially mechanisms. prepared for all types of industrial qualification Despite the full functionality of the F1N and even such as extended temperature range (-40 to +85°C), with its 2 PC-MIP slots populated, the complete CPU shock, vibration, humidity etc., and is thus the card still needs only one slot in a CompactPCI system. optimum choice for the most extreme environmental By means of an adapter in double PC-MIP format (AD45) conditions: railroad, ship and aerospace applications.the F1N functionality can be extended by four RS232 The computing core of the F1N is the powerful high-UARTs and 100Base-T Ethernet. The signals are speed MPC8245 Kahlua processor, which has an internal available at the front via five RJ45 connectors. The PowerPC 603. The F1N is equipped with SO-DIMM SDRAM, F1N in this configuration still needs only one slot on CompactFlash (TM) and Flash, two serial interfaces, the CompactPCI bus (see Related Products and AD45 data hard-disk controller (IDE), RTC with 8k NVRAM, sheet). keyboard, mouse, USB and two local PC-MIP mezzanines ® 1 Embedded Solutions F1N Data Sheet - 2004-10-27 Technical Data CompactPCI Bus • MTBF: 159,000h @ 50°C • 3U CompactPCI CPU board rev. 2.1 compliant Mechanical Specifications · Compliance with PCI specification 2.1 • Dimensions: conforming to CompactPCI specification for 3U · Up to 33MHz PCI frequency boards • 32-bit CompactPCI system slot functionality • Weight: 180g • 6 possible external loads due to PCI-to-PCI bridge • V(I/O): +3.3V or +5V (Universal Board) Environmental Specifications • Temperature range (operation):CPU · 0..+60°C or -40..+85°C • PowerPC MPC8245/300MHz · Airflow: min. 10m³/h Memory • Temperature range (storage): -40..+85°C • Level 1 Cache integrated in MPC8245 • Relative humidity range (operation): max. 95% • SDRAM SO-DIMM up to 512MB non-condensing · 64 bits • Relative humidity range (storage): max. 95% non-condensing • Flash 2MB • Altitude: -300m to + 3,000m · 8 bits • Shock: 15g/0.33ms, 6g/6ms • Serial EEPROM 4Kbit • Vibration: 1g/5..2,000Hz · For factory settings Safety • CompactFlash (TM) interface (true IDE) • PCB manufactured with a flammability rating of 94V-0 by Interfaces UL recognized manufacturers • Two serial COM ports EMC · Physical interface using SA adapter via 10-pin ribbon • Tested according to EN 55022 / 1999-05 (radio cable disturbance) and EN 55024 / 1999-05 (immunity) with · RS232..RS485, isolated or not: for free use in system regard to CE conformity (cable to front or back) • IDE Software Support • Keyboard/mouse • MENMON • USB • Linux • VxWorksLocal Extensions • QNX • PC-MIP I/O at front panel • OS-9 · Two PC-MIP mezzanine extension slots · Compliant with PC-MIP specification (Type I/II slots) Differences to F1 • Processor F1: MPC8240 (F1N: MPC8245) • Processor address Map F1: Map A (F1N: Map B) • F1 AND F1N ARE NOT SOFTWARE-COMPATIBLE! Miscellaneous • Real-time clock with 8k NVRAM • Hardware monitor and watchdog for on-board temperature control • Hex switch for user settings Electrical Specifications • Supply voltage/power consumption: · +5V (4.75V..5.25V), 0.44A typ. · +3.3V (3.0V..3.6V), 1.25A typ. w/o SO-DIMM; increases up to 2A depending on installed SO-DIMM ® 2 Embedded Solutions F1N Data Sheet - 2004-10-27 Diagram ® 3 Embedded Solutions F1N Data Sheet - 2004-10-27 Related Products Standard Hardware 02F001N00 F1N, CompactPCI 3U, single-board computer, MPC8245/300MHz, 2MB Flash, no DRAM, 2 PC-MIP slots, 1-slot front panel 02F001N01 F1N, CompactPCI 3U, single-board computer, MPC8245/300MHz, 2MB Flash, no DRAM, 2 PC-MIP slots, 1-slot front panel, temperature range: -40..+85°C Please refer to our 3U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0701-0009 Abk13.10.04 - nur intern; Preis wird nicht erhBuy:offen fexistierende Kunden Last Delivery:offen fexistierende Kunden Name: B.Schmitz Grund: Ersatz-Standardsystem 0701-0021 kann falle 3U-Karten verwendet werden ------------------------------------------------------------CompactPCI 19" 3U rack-mount enclosure, 3U 7-slot CompactPCI backplane, ATX power supply 0701-0018 CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 8-slot 3U CompactPCI backplane, system slot right, no rear I/O, space for hard-disk drive, floppy drive, 300W ATX power supply wide range 100..240VAC on front, 1U fan tray included Accessories 05F001-00 Mounting kit for 2 SA adapters for F1/F1N/F4, incl. 3U 1-slot CompactPCI front panel and ribbon cable, without SA adapters 05F003-03 IDE adapter cable, 44-pin 2-mm IDE connection to 2x 44-pin 2-mm IDE connection, 450mm 0500-0002 Battery M4T28... for Timekeeper M48T86 (spare part) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C ® 4 Embedded Solutions F1N Data Sheet - 2004-10-27 Related Products 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0033 64MB DRAM 0..+60°C for 02F001N00 0752-0034 128MB DRAM 0..+60°C for 02F001N00 0752-0035 256MB DRAM 0..+60°C for 02F001N00 0752-0107 256MB DRAM -40..+85°C for 02F001N01 08AD45-05 AD45, double PC-MIP, DS21143 Ethernet controller, 10/100Mbit/s, 100Base-T, quad RS232 UART 16450 with 128-byte FIFO, with front panel for 3U CompactPCI boards, 0..+60°C 08AD45-06 AD45, double PC-MIP, DS21143 Ethernet controller, 10/100Mbit/s, 100Base-T, quad RS232 UART 16450 with 128-byte FIFO, with front panel for 3U CompactPCI boards, -40..+85°C 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA01-03 Serial interface adapter for F1/F1N/F4/B11, RS232, not optically isolated, for direct mounting on CPU board, 0..+60°C (N.B.: Standard adapters can only be mounted using MEN's mounting kit.) 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 10ABMX-20 ELinOS V.3.0 - Embedded Linux incl. RTAI real-time extension for PowerPC, English version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, A15, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software suppvort it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. ® 5 Embedded Solutions F1N Data Sheet - 2004-10-27 Related Products 10ABMX-21 ELinOS V.3.0 - Embedded Linux incl. RTAI real-time extension for PowerPC, German version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software support it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. 10F001N01 OS-9(000) V.2.2/3.x: BSP for F1N, B11, A12, D3, SC13, Kahlua Box (object code, MEN) 10F001N02 OS-9(000) V4.2: BSP for F1N, B11, A12, A15, D3, SC13, Kahlua Box (object code, MEN) 10F001N40 QNX 6 BSP for F1N, B11, A12, A15, D3, SC13, Kahlua Box (object code, MEN) 10F001N60 VxWorks V.5.4..5.5 / Tornado 2.0..2.2 BSP for F1N, B11, A12, D3, SC13, Kahlua Box, A15 This board is an MEN product running Sysgo's ELinOS Embedded Linux. Sysgo provides full support for MEN hardware. Please contact www.sysgo.de. QNX software for this MEN board is available from QNX (www.qnx.com). For QNX BSP and driver support provided by MEN please refer to the ordering numbers below. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. For OS-9 BSP and driver support provided by MEN please refer to the ordering numbers below. XiBase9, a graphical user interface for Linux and OS-9 from XiSys, is running on the MEN graphics controller PC-MIP and PMC modules P1, P17 and P517 in combination with the PowerPC-based Single-Board Computers A11, A12, D3, F1N, B11 and SC13 (further SBCs on request). For more information, purchase and support please apply to www.xisys.de. 14F001-00 MENMON (Firmware) for F1 and F1N (object code) You can download the data sheet for the MENMON firmware for PowerPC platforms from MEN's website. Documentation 20AD45-00 AD45 user manual 20F001N00 F1N user manual ® 6 Embedded Solutions F1N Data Sheet - 2004-10-27 Related Products 21APPN003 Application Note: Using P1/P501 Graphics on MEN 824x/ALI boards under ELinOS For the most up-to-date ordering information and direct links to other data sheets and downloads, see the F1N online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 7 Embedded Solutions