A15c Data Sheet - 2004-10-27 A15c - 6U VME64 PowerPC SBC with PMCs u PowerPC MPC8245/400MHz u 1-slot 64-bit VMEbus master and slave u 512MB DRAM, CompactFlash u Graphics via PMC u Dual 10/100Mbit Fast Ethernet u 4 COMs, USB, IDE, keyboard/mouse u 2 PMC slots The A15 is an advanced PowerPC based single-board functions such as additional UARTs, a CAN bus computer for embedded applications. It features full interface, DSP functions etc. VME64 support and it can be used as a master or a In addition, the A15c can be equipped with PMC slave in a VMEbus environment. The A15 provides 1MB mezzanine cards supporting both front I/O and rear local dual-ported SRAM for slave access and I/O. PMCs may particularly be used for intelligent communication between the local CPU and another VMEbus telecom I/O. The modular combination of I/O master.functionality on a single-board computer allows to The A15 comes with the MPC8245 PowerPC with 400MHz build up tailored control systems which appear as clock frequency and local 32-bit/33MHz PCI data bus. customized solutions based on standard components. It is a complete state-of-the-art SBC offering DRAM, Depending on the kind of I/O requirements, further Flash and CompactFlash memory, dual Fast Ethernet, standard versions of A15 are availabe for other four COMs, USB, IDE and keyboard/mouse interfaces as mezzanine standards. well as an optional on-board hard disk. A software-The A15 single-board computer is partly compatible loadable FPGA is available for individual user-defined with the MVME2100 board by Motorola. ® 1 Embedded Solutions A15c Data Sheet - 2004-10-27 Technical Data CPU • Slave D08(EO):D16:D32:D64:A16:A24:A32:BLT:RMW; transfer • PowerPC rate max. 25MB/s · MPC8245 • 1MB dual-ported fast SRAM · 400MHz • Interrupter D08(O):I(7-1):ROAK • Interrupt handler D08(O):IH(7-1) Memory • Single level 3 fair requester • Level 1 Cache integrated in MPC8245 • Single level 3 arbiter • SO-DIMM slot for up to 512MB SDRAM • Bus timer • 133MHz memory bus operation • Location Monitor • Boot Flash 2MB or 4MB • DMA · 8-bit data bus • Mailbox • Optional 32MB application Flash · 64-bit data busMezzanine Extensions • Serial EEPROM 4kbits for factory settings • A15a: three PC-MIPs Type I/II on local PCI bus • CompactFlash (TM) card interface for Flash ATA (true IDE) · Compliant with PC-MIP specification via on-board IDE • A15b: three M-Modules · Compliant with M-Module standard Interfaces · Characteristics: D16, D32, A08, A24, INTA, INTC • Two 10/100Mbits/s Ethernet channels • A15c: two PMCs · Intel 82551ER · Compliant with PMC standard IEEE P1386 · RJ45 at front panel with two LEDs • Rear I/O for mezzanine I/O on P2 • One UART RS232 serial interface (COM1) · 16-byte send/receive bufferMiscellaneous · RJ45 at front panel • Serial real-time clock with integrated 56-byte NVRAM • One UART (COM2) • Serial hardware watchdog in supervisory circuit · 16-byte send/receive buffer • Temperature sensor · Physical interface at front panel or using SA adapter via • Hex switch for user settings 10-pin ribbon cable on I/O connector, depending on board • User LEDs (integrated into COM1 connector) version • Reset button in ejector handle · RS232..RS485, isolated or not: for free use in system (e. • Abort button via I/O connector g. cable to front) • JTAG/BDM connector • Two MPC8245 UARTs Electrical Specifications · Accessible via I/O connector • Supply voltage/power consumption: • IDE port for hard disk drives · +5V (4.85V..5.25V), 1.3A typ. · Drive can be connected via ribbon cable or mounted · ±12V for mezzanines only, tbd. directly on the CPU board using MEN's adapter kit • MTBF: 63,000h @ 50°C · Only one CompactPCI slot needed even with hard disk • Keyboard/mouse Mechanical Specifications · PS/2 compatible • Dimensions: standard double Eurocard, 233.3mm x 160mm · External adapters for line drivers required • Weight (without mezzanines and accessories): • USB port · A15a: 330g · External line drivers · A15b: 330g · A15c: 330gLocal PCI Bus • PCI Spec. 2.2 compliant Environmental Specifications • 32-bit data bus, 33MHz, 3.3V • Temperature range (operation): · 0..+60°C or -40..+85°CVMEbus · Airflow: min. 10m³/h • Compliant with VME64 Specification • Temperature range (storage): -40..+85°C • Slot-1 function with autodetection • Relative humidity (operation): max. 95% non-condensing • Master D08(EO):D16:D32:D64:A16:A24:A32:ADO:BLT:RMW; transfer rate max. 25MB/s ® 2 Embedded Solutions A15c Data Sheet - 2004-10-27 Technical Data • Relative humidity (storage): max. 95% non-condensing • Altitude: -300m to + 3,000m • Shock: 15g/11ms • Bump: 10g/16ms • Vibration (sinusoidal): 2g/10..150Hz Safety • PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC • Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to CE conformity Software Support • MENMON • Linux • VxWorks • OS-9 • QNX (on request) ® 3 Embedded Solutions A15c Data Sheet - 2004-10-27 Diagram ® 4 Embedded Solutions A15c Data Sheet - 2004-10-27 Related Products Standard Hardware 01A015A00 A15a, VME64 6U Single-Board Computer, PowerPC MPC8245/400MHz, 2MB boot Flash, CompactFlash slot, SO-DIMM slot, 3 PC-MIP slots, 0..+60°C 01A015A01 A15a, VME64 6U Single-Board Computer, PowerPC MPC8245/400MHz, 2MB boot Flash, CompactFlash slot, SO-DIMM slot, 3 PC-MIP slots, -40..+85°C 01A015B00 A15b, VME64 6U Single-Board Computer, PowerPC MPC8245/400MHz, 2MB boot Flash, CompactFlash slot, SO-DIMM slot, 3 M-Module slots, 0..+60°C 01A015B01 A15b, VME64 6U Single-Board Computer, PowerPC MPC8245/400MHz, 2MB boot Flash, CompactFlash slot, SO-DIMM slot, 3 M-Module slots, -40..+85°C 01A015C00 A15c, VME64 6U Single-Board Computer, PowerPC MPC8245/400MHz, 2MB boot Flash, CompactFlash slot, SO-DIMM slot, 2 PMC, 0..+60°C 01A015C01 A15c, VME64 6U Single-Board Computer, PowerPC MPC8245/400MHz, 2MB boot Flash, CompactFlash slot, SO-DIMM slot, 2 PMC, -40..+85°C The A15 is partly compatible with the MVME2100 board by Motorola. You can download the corresponding compare chart here. Please refer to our 6U VMEbus compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0700-0006 CE-conforming housing for VMEbus 6U: closed 19" rack, 5U, 7 slots, J1+2 backplane (not VME64), power supply 230V, fan incl. power cable no. 6080-0020 Accessories 05AD67-00 IDE mounting kit 44-pin to 44-pin; 50.8 mm; installation kit for Kahlua Box or A12, D3, A15 with AD67, temperature range: -40..+85°C 05A012-01 Mounting kit for 2 SA adapters for A12/A15/D3, incl. 6U 1-slot VME or CompactPCI front panel incl. ribbon cable, without SA adapters 05F006-00 RS232 interface cable 9-pin D-Sub plug to 8-pin RJ45 plug, 2m ® 5 Embedded Solutions A15c Data Sheet - 2004-10-27 Related Products 05M000-17 25 mounting screw sets to fix M-Modules on carrier boards You can download the data sheet for hard disk 0710-0012 from MEN's website. 0710-0009 IDE hard disk 2.5", 9.5mm, 20GB; for mounting on-board (harddisk mounting kit may be additionally required) 0710-0012 Industrial IDE hard disk 2,5", 40GB, 24 hours/7 days, 0..+60°C; for on-board mounting (hard disk mounting kit may be required additionally) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0080 256MB DRAM 0..+60°C for 01A015C00 0752-0089 128MB DRAM 0..+60°C for 01A015C00 0752-0112 512MB DRAM 0..+60°C for 01A015C00 08AD67-01 I/O extension 19" 6U 4HP incl. 1 USB connector, 1 keyboard connector, 1 mouse connector; prepared for 3 SA adapters, prepared for HDD 2.5", reset, abort, 0..+60°C 08AD71-00 AD71, 2,5" HD-adapter for A013, A015 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software ® 6 Embedded Solutions A15c Data Sheet - 2004-10-27 Related Products 10ABMX-20 ELinOS V.3.0 - Embedded Linux incl. RTAI real-time extension for PowerPC, English version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, A15, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software suppvort it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. 10ABMX-21 ELinOS V.3.0 - Embedded Linux incl. RTAI real-time extension for PowerPC, German version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software support it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. 10F001N02 OS-9(000) V4.2: BSP for F1N, B11, A12, A15, D3, SC13, Kahlua Box (object code, MEN) 10F001N60 VxWorks V.5.4..5.5 / Tornado 2.0..2.2 BSP for F1N, B11, A12, D3, SC13, Kahlua Box, A15 This board is an MEN product running Sysgo's ELinOS Embedded Linux. Sysgo provides full support for MEN hardware. Please contact www.sysgo.de. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. For OS-9 BSP and driver support provided by MEN please refer to the ordering numbers below. 13Z014-90 Linux device driver for MEN PCI to VME bridge on A12, A13, B11, A15 Including Documentation 14A015-00 MENMON (Firmware) for A15 (object code) You can download the data sheet for the MENMON firmware for PowerPC platforms from MEN's website. Documentation 20A015-00 A15 user manual ® 7 Embedded Solutions A15c Data Sheet - 2004-10-27 Related Products 21APPN003 Application Note: Using P1/P501 Graphics on MEN 824x/ALI boards under ELinOS For the most up-to-date ordering information and direct links to other data sheets and downloads, see the A15c online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 8 Embedded Solutions