F2 Data Sheet - 2004-03-25 F2 - 3U CompactPCI Pentium SBC u Pentium (Tillamook) 266MHz u 2-slot 32-bit CompactPCI system master u Ready for PXI u 384MB DRAM u Graphics via PC-MIP u 10/100Mbit Fast Ethernet u 4 COMs, USB, 2 IDE, floppy, parallel, keyboard/mouse u 1 PC-MIP slot (Type I/II) The F2 is a high-end Pentium workstation optimized for DIMMs, BIOS extensions for non-video, etc., support of industrial requirements in control and instrumentation PXI trigger signals (National Instruments), a local PC- in terms of functionality, environmental conditions MIP mezzanine for flexible and individual workstation and cost. Its "socket 7"-based computing core supports I/O extensions like graphics, additional serial lines, Intel's Tillamook CPUs with different clock speeds. etc. The chip set supports the latest DRAM technology. All The F2 is a two-card solution, comprised of a CPU PCI components are carefully selected for optimum board and an I/O board. While the CPU board can be support regarding long-term availability.plugged into a CompactPCI system slot, the I/O board In addition to state-of-the-art PC functionality - leads signals to a rear I/O adapter for convenient such as 10/100Mbit Ethernet, UARTs, EIDE, LPT, rear I/O without nasty cabling. Microsoft ACPI, floppy, GPIO and USB - the F2 is The F2 is carefully prepared for all types of equipped with a bundle of unique industrial functions: industrial qualification procedures such as extended highly reliable, SMT-mounted SDRAM in addition to SO-temperature range (-40 to +85°C), shock, vibration, humidity etc. ® 1 Embedded Solutions F2 Data Sheet - 2004-03-25 Technical Data CompactPCI Bus Mass Storage • 3U CompactPCI CPU board rev. 2.1 compliant • Two fast IDE hard-disk ports • Ali Aladdin 5 chip set · Up to 33 MB/s · Compliance with PCI specification 2.1 · Supports UltraDMA and PIO mode 4 · Up to 33 MHz PCI frequency · Via rear I/O adapter • 32-bit CompactPCI system slot functionality with 7 • Floppy-disk controller possible external loads due to PCI-to-PCI bridge · 2.88 MB • DEC 21150 PCI-to-PCI bridge · Via rear I/O adapter • Single-slot solution (on PCI bus) Miscellaneous • V(I/O): +3.3V or +5V (Universal Board) • Battery-backed real-time clock CPU • External user-definable watchdog • Pentium with MMX, 266MHz Tillamook • Integrated hardware monitor with alarm function, • Passive cooling supervises temperature, all voltages including back-up battery, and power supply (via rear I/O adapter) Memory • Reset button and LEDs at front panel • Up to 1MB Level 2 Cache • Audible beeper • 8 to 384 MB DRAM · One 144-pin SO-DIMM socket for 1Mx64 to 32Mx64 Electrical Specifications synchronous DRAM modules (CAS latency 2-2-2) • Supply voltage/power consumption: · Up to 100MHz memory bus frequency · +5V (4.85V..5.25V), 1.8A typ. (Tillamook/266MHz, 32MB • 2 Mbit BIOS Flash DRAM, P1 graphics PC-MIP, no peripherals) · +3.3V (3.0V..3.6V), 1.2A typ. (Tillamook/266MHz, 32MB Interfaces DRAM, P1 graphics PC-MIP, no peripherals) • Four serial communication ports (COM1..COM4) · +12V (11.4V..12.6V); -12V (-11.4V..-12.6V) (power • COM1, COM2: RS232 physical interface consumption determined by PC-MIPs used) · 9-pin D-Sub connectors at front panel • MTBF: 30,000h @ 50°C • COM2 also via rear I/O adapter • COM3/COM4 via on-board serial interface adapters or via Mechanical Specifications rear I/O adapter • Dimensions: conforming to CompactPCI specification for 3U • Full-duplex 10/100Mbits/s PCI Ethernet controller boards · 21143 PCI LAN controller • Weight: 560g · 100Base-TX/10Base-T interface at front panel • Supports backplanes with system slot left and right · Simultaneous transmission of 10Mbits/s and 100Mbits/s (MEN's standard 3U CompactPCI basic system (system slot frames right) already provides one extra slot for the F2's I/O • USB (Universal Serial Bus) interface board.) · Conforming to Open HCI 1.0a • Front panel with system slot right (standard): · Via rear I/O adapter · 8HP total • Keyboard and mouse at 6-pin PS2 connector at front panel · Only 4HP on CompactPCI backplane uses external Y-cable • Front panel with system slot left: • Parallel port (SPP, EPP, ECP) via rear I/O adapter · 8HP total for processors < 8W power dissipation · 12HP for processors > 8W power dissipation PXI · Only 4HP/8HP on CompactPCI backplane • Five trigger lines compliant with PXI Spec. R1.0 Environmental Specifications Local Extensions • Temperature range (operation): • PC-MIP I/O at front panel or via rear I/O adapter · 0..+45°C or 0..+60°C (266MHz Tillamook) · One PC-MIP mezzanine extension slot compliant with PC-MIP · Industrial temperature range on request specification (Type I/II slot) · Airflow: min. 10m³/h • Temperature range (storage): -40..+85°C • Relative humidity (operation): max. 95% non-condensing ® 2 Embedded Solutions F2 Data Sheet - 2004-03-25 Technical Data • Relative humidity (storage): max. 95% non-condensing • Altitude: -300m to + 3,000m • Shock: 15g/0.33ms, 6g/6ms • Vibration: 1g/5..2,000Hz Safety • PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC • Tested according to EN 55022 / 1999-05 (radio disturbance) and EN 55024 / 1999-05 (immunity) with regard to CE conformity Software Support • Plug and Play Award BIOS for industrial applications · Console Redirection: supports administration via terminal (VT100) · CMOS Back-Up: CMOS Configuration is backed-up in NVRAM • Windows NT, Windows 2000/XP • VxWorks • Linux (on request) • QNX (on request) • RTX (on request) ® 3 Embedded Solutions F2 Data Sheet - 2004-03-25 Diagram ® 4 Embedded Solutions F2 Data Sheet - 2004-03-25 Related Products Standard Hardware 02F002-00 F2, CompactPCI 3U, single-board computer, Pentium MMX/266 MHz, 512KB cache, 32MB DRAM, 100Mbit Ethernet, 1 PC-MIP slot, 2-slot front panel, for backplanes with system slot right 02F002-02 F2, CompactPCI 3U, single-board computer, Pentium MMX/266MHz, 512KB cache, 32MB DRAM, 100Mbit Ethernet, COM1..4, 1 PC-MIP slot, 2-slot front panel, for backplanes with system slot left Please refer to our 3U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0701-0009 Abk13.10.04 - nur intern; Preis wird nicht erhBuy:offen fexistierende Kunden Last Delivery:offen fexistierende Kunden Name: B.Schmitz Grund: Ersatz-Standardsystem 0701-0021 kann falle 3U-Karten verwendet werden ------------------------------------------------------------CompactPCI 19" 3U rack-mount enclosure, 3U 7-slot CompactPCI backplane, ATX power supply 0701-0018 CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 8-slot 3U CompactPCI backplane, system slot right, no rear I/O, space for hard-disk drive, floppy drive, 300W ATX power supply wide range 100..240VAC on front, 1U fan tray included Accessories 05A000-10 Keyboard/mouse Y-cable 0.1m, 6-pin Mini DIN plug to two 6-pin Mini DIN receptacles 05F002-00 Mounting kit for 2 SA adapters for F2, version for backplanes with system slot right incl. 3U 1-slot CompactPCI front panel and two ribbon cables, without SA adapters 0500-0002 Battery M4T28... for Timekeeper M48T86 (spare part) 0713-0001 CompactPCI 1-slot 3U I/O midplane 08AD38-00 Rear I/O interface adapter for F2, 3U/80mm 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C ® 5 Embedded Solutions F2 Data Sheet - 2004-03-25 Related Products 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 10F002-60 VxWorks V.5.4 / Tornado 2.0 BSP for F2 This MEN board is designed to work in a Microsoft Windows environment. For additional Windows driver packages provided or recommended by MEN please refer to the ordering numbers below. QNX software for this MEN board is available from QNX (www.qnx.com). For QNX BSP and driver support provided by MEN please refer to the ordering numbers below. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. This board is an MEN product running Linux. For Linux BSP and driver support provided by MEN please refer to the ordering numbers below. 13F002-00 WindowsNT driver package for F2 (object code, MEN) To use MDIS4 low-level drivers, you also need one of the MDIS4 system packages available for Windows, Linux, VxWorks, QNX, RTX or OS-9 (MDIS4 = MEN Driver Interface System). 13Z004-06 MDIS4 low-level driver sources for ALI1543 user LEDs on D2/F2 13Z008-06 MDIS4 low-level driver sources for GPIO lines on D2/F2 13Z009-06 MDIS4 low-level driver sources for Z8536 F2, watchdog, SMB Documentation 20AD38-00 AD38 user manual 20F002-00 F2 user manual 21APPN002 Application Note: How to use Special Features of MEN's F2 under Linux using MDIS Drivers For the most up-to-date ordering information and direct links to other data sheets and downloads, see the F2 online data sheet under www.men.de. --> Click here! ® 6 Embedded Solutions F2 Data Sheet - 2004-03-25 Contact Information Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® Embedded Solutions