SA8 Data Sheet - 2012-04-02 SA8 - CAN Bus SA-Adapter™ n 1 ISO high-speed channel n Optically isolated n Shielded 9-pin D-Sub connector  The SA8 is a 1-channel CAN ISO high-speed interface regard to the line transceivers and isolation adapter with optical isolation.requirements. Whether a specific SA-Adapter™ (or a mix SA-Adapters™ are small universal boards providing the of different SA-Adapters™) fits on a specific CPU physics for legacy serial I/O, fieldbus interfaces and board is determined by a combination of mechanical, other small I/O functions. One serial line is provided performance, FPGA and operating system criteria and per adapter, which can be plugged directly to the CPU needs to be verified for every board configuration board as a mezzanine. Alternatively, the adapter can requested. be connected to the front panel via ribbon cable. The SA concept allows to add additional I/O interfaces to many of MEN's CPU boards, enhancing flexibility with ® 1 Embedded Solutions SA8 Data Sheet - 2012-04-02 Technical Data Universal Concept EMC n 2 data linesn Tested according to EN 55022 (radio disturbance), n 2 power supply linesIEC1000-4-2 (ESD) and IEC1000-4-4 (burst) Interface Type n CAN, ISO high-speed, optically isolated Interface Compliance n ISO high-speed n Fully compatible with ISO 11898-24 V standard Peripheral Connections n Via front panel on a shielded 9-pin D-Sub receptacle connector Installation n As a piggy-back board directly on a CPU board n Via ribbon cable Electrical Specifications n Isolation voltage: o 500V DC o Voltage between the connector shield and isolated ground is limited to 180V using a varistor; AC coupling between connector shield and isolated ground through 100nF capacitor n Supply voltage/power consumption: +5V (4.85V..5.25V), 100mA typ. n MTBF: 610,000h @ 50°C (derived from MIL-HDBK-217F) Mechanical Specifications n Dimensions: 32mm x 42mm n Weight: 20g Environmental Specifications n Temperature range (operation): o 0..+60°C or -40..+85°C (screened) o Airflow: min. 10m³/h n Temperature range (storage): -40..+85°C n Relative humidity (operation): max. 95% non-condensing n Relative humidity (storage): max. 95% non-condensing n Altitude: -300m to + 3,000m n Shock: 15g/11ms n Bump: 10g/16ms n Vibration (sinusoidal): 2g/10..150Hz n Conformal coating on request Safety n PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers ® 2 Embedded Solutions SA8 Data Sheet - 2012-04-02 Diagram ® 3 Embedded Solutions SA8 Data Sheet - 2012-04-02 Ordering Information Standard SA8 Models For more functions realized with SA-Adapters™, see the listing on MEN's website.View listing of SA-Adapters™Please contact sales to make sure that these SA-Adapters™ can be used in the board configuration you are looking for. 08SA08-00 CAN ISO high-speed, optically isolated, 0..+60°C 08SA08-01 CAN ISO high-speed, optically isolated, -40..+85°C screened Documentation 20SA08-00 SA8 User Manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the SA8 online data sheet under » www.men.de. Germany France USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro, Inc. Neuwieder Straße 3-718, rue René Cassin24 North Main Street 90411 NurembergZA de la ChâtelaineAmbler, PA 19002 Phone +49-911-99 33 5-074240 GaillardPhone (215) 542-9575 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Fax (215) 542-9577 E-mail info@men.deFax +33 (0) 450-955-211E-mail sales@menmicro.com www.men.deE-mail info@men-france.frwww.menmicro.com www.men-france.fr The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication. MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything, done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication. The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual.The correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product for the applicable use case and has to be agreed upon in writing by MEN and the customer.Should the customer purchase or use MEN products for any unintended or unauthorized application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that MEN was negligent regarding the design or manufacture of the part. In no case is MEN liable for the correct function of the technical installation where MEN products are a part of. Copyright © 2012 MEN Mikro Elektronik GmbH. All rights reserved. ® 4 Embedded Solutions