EM04N Data Sheet - 2004-12-23 EM04N - ESM with PowerPC MPC 8245 n Embedded System Module with: n PowerPC MPC8245 up to 400 MHz n FPGA 250,000 gates n Up to 512 MB SDRAM, CompactFlash n Dual Fast Ethernet, dual COM (front) n Graphics optional via FPGA (plus 16 MB SDRAM) n Further COMs, CANopen, IDE etc. optional via FPGA (USB, keyboard/mouse, floppy etc. optional on carrier board) n Stackable with PCI-104 The EM04N is a complete embedded single-board computer FPGA, which has a capacity of 250,000 gates. for use on any carrier board in different industrial The EM04N is an ideal computer for low-cost deeply environments. The final application consists either of embedded solutions in very harsh environments, for a stand-alone EM04N, the EM04N with an application-machine control, Man-Machine Interfaces, fieldbus specific carrier card and/or with additionally plugged bridges or embedded Linux PCs. PCI-104 modules. The EM04N is controlled by an MPC8245 PowerPC For a first evaluation of the functions of the EM04N microprocessor which operates at 266MHz up to 400MHz. it is strongly recommended to use the EK02 ESM starter The MPC8245 includes a Floating Point Unit and a kit. The kit consists of the standard CPU module, an Memory Management Unit. The EM04N has an SO-DIMM FPGA loaded with additional I/O functions, the carrier socket for data and a CompactFlash slot for program card with I/O connectors, an external PSU, VGA and storage. RJ45 to D-Sub cables, and an adapter for mounting a At its front panel the EM04N provides two RS232 PCI-104 module. interfaces and two Fast Ethernet channels. Additionally, nearly unlimited I/O functionality such ESM modules are complete computers on a plug-on as graphics controllers, serial interfaces, CAN bus module. They consist of the hardware (CPU, chip set, controller etc. can be realized in a very flexible and memory, I/O) which is not fixed to any application- cost-effective way by means of an onboard FPGA. specific function, and an FPGA programmed in VHDL Physical interfaces for such functions must be code, which provides I/O that is also still implemented on the carrier board. Compared to the independent of a specific application. ESM modules are EM04, the EM04N is equipped with a larger onboard based on PCI. They have two system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. ® 1 Embedded Solutions EM04N Data Sheet - 2004-12-23 Technical Data CPU Mechanical Specifications n PowerPCn Dimensions: conforming to ESM specification (PCB: 149mm x o MPC8245 71mm) o 266MHz..400MHzn Weight: 100g MemoryEnvironmental Specifications n Level 1 Cache integrated in MPC8245n Temperature range (operation): n SO-DIMM slot for up to 512MB SDRAMo 0..+60°C or -40..+85°C n 133MHz memory bus operationo Airflow: min. 10m³/h n Flash 2MBn Temperature range (storage): -40..+85°C o 8-bit data busn Relative humidity (operation): max. 95% non-condensing n Serial EEPROM 4kbit for factory settingsn Relative humidity (storage): max. 95% non-condensing n CompactFlash (TM) card interface for Flash ATA (true IDE) n Altitude: -300m to + 3,000m via on-board IDEn Shock: 15g/11ms n 32MB SDRAM, connected to FPGA, e.g. for video datan Bump: 10g/16ms n Vibration (sinusoidal): 2g/10..150Hz Interfaces n Two 10/100Mbits/s Ethernet channelsSafety o GD82551 controllersn PCB manufactured with a flammability rating of 94V-0 by o Two RJ45 connectors at front panel UL recognized manufacturers n Two UART RS232 serial interfaces (COM1/COM2) EMCo Two RJ45 connectors at front panel n Tested according to EN 55022 / 1999-05 (radio n IDE port for hard-disk drives disturbance) and EN 55024 / 1999-05 (immunity) with o Available at I/O Connector regard to CE conformityo If implemented in FPGA Software SupportI/O options through FPGA n MENMONn Available at I/O connector n Linux (ELinOS)n All functions optional, depending on FPGA composition n VxWorksn IDE interface n QNX (on request)n SPI interface (e.g. for touch panel control) n OS-9 (on request)n SRAM controller n CANopen support: MEN Driver Interface System (MDIS for n Quad UART Windows, Linux, VxWorks, QNX, RTX, OS-9)n RTS-controlled UART n MSCAN/Layer2 support: MEN Driver Interface System (MDIS n CAN interface for Windows, Linux, VxWorks, QNX, RTX, OS-9)n GPIO n Display control for TFT panels, 800 x 600 pixels, 16-bit color PCI Interface n 32-bit PCI interface at PCI-104 connector J1 n Support of 2 external masters Miscellaneous n Real-time clock n Power supervision and watchdog Electrical Specifications n Supply voltage/power consumption: o +5V (4.85V..5.25V), 500mA o +3.3V (3.0V..3.6V), 1A, w/o SO-DIMM; increases up to 1.6A depending on installed SO-DIMM n MTBF: 160,000h @ 50°C ® 2 Embedded Solutions EM04N Data Sheet - 2004-12-23 Diagram ® 3 Embedded Solutions EM04N Data Sheet - 2004-12-23 Related Products Standard Hardware 08EK02-03 ESM evaluation kit: Mini ATX carrier board EC01 with 1 ESM slot, 3 PCI slots, floppy interface; ESM EM04N with PowerPC Kahlua II / 400MHz, 2MB Flash, 2 Fast Ethernet, 2 COMs, FPGA functions (graphics 800x600, CAN, quad UART, SPI, IDE); temperature range: 0..+60°C; incl. external PSU, RJ45 to D-Sub cable, VGA cable and adapter for mounting of one PCI-104 module - 256MB DRAM installed, CompactFlash not installed (08EK02-03 = EC01-00 + EM04N01) 15EM04N01 EM04N, ESM - Embedded System Module, PowerPC Kahlua II / 400MHz, 2MB Flash, CompactFlash slot, SO-DIMM DRAM slot, dual Fast Ethernet, 2 COMs, FPGA functions (graphics 800x600, CAN, quad UART, SPI, IDE, SRAM, GPIO); PCI-104 stackable; temperature range: 0..+60°C Please refer to our ESM - Embedded System Modules compare chart for a selection of further single-board computers with different processors and on-board functionality. FPGA IP Cores This MEN board offers the possibility to add customized I/O functionality in FPGA. Every standard board comes with a preconfigured FPGA configuration. For additional functions already developed by MEN please refer to our FPGA IP Core overview. More IP cores that can be used in combination with MEN IP cores are available for example from www.altera.com or www.opencores.org. MEN also offers integration of existing and development ofnew (customized) IP cores. Depending on the hardware platform, SA adapters can be used to realize the physical lines - see below. Altera offers free download of its FPGA development software: The Quartus II Web Edition software includes a complete environment for FPGA and CPLD design, including schematic- and text-based design entry, integrated VHDL and Verilog HDL synthesis and support for third-party synthesis software, SOPC Builder system generation software, place-and-route, verification, and programming. For more information and free download of the software please refer to www.altera.com/products. The Altera Tools Selector guide describes the Altera tool offerings and requirements. The online version of the document is available at www.altera.com/literature. Accessories 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0123 256MB DRAM 0..+60°C for 15EM04N01 ® 4 Embedded Solutions EM04N Data Sheet - 2004-12-23 Related Products 0752-0158 512MB DRAM 0..+60°C for 15EM04N01 0752-0183 64MB DRAM 0..+60°C for 15EM04N01 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C 08SA08-00 Serial interface adapter, CAN ISO high-speed, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 10ABMX-20 ELinOS V.3.1 - Embedded Linux incl. RTAI real-time extension for PowerPC, English version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, A15, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software support it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. 10ABMX-21 ELinOS V.3.1 - Embedded Linux incl. RTAI real-time extension for PowerPC, German version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software support it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. ® 5 Embedded Solutions EM04N Data Sheet - 2004-12-23 Related Products 10EM04-60 VxWorks® Tornado 2.0.2..2.2.1/VxWorks® 5.4 .. 5.5.1 BSP for EM04 and EM04N This board is an MEN product running Sysgo's ELinOS Embedded Linux. Sysgo provides full support for MEN hardware. Please contact www.sysgo.de. MEN has vast experience with CANopen-based implementations on standard and custom boards and systems. The CANopen protocol stack on MEN solutions runs under Windows®, Linux, VxWorks®, QNX®, OS-9 and other software environments. You will find more information about CANopen under www.can-cia.org/canopen. 13Z015-06 MDIS4/2004 low-level driver sources for MSCAN/Layer2 13Z016-06 MDIS4/2004 low-level CANopen driver (Master) 13Z016-70 MDIS4/2004 Windows® NT4/W2K driver for CANopen 14EM04-00 MENMON (Firmware) for EM04, EM04N (object code) Documentation 20EK02-00 EK02 user manual 20EM04-00 EM04/EM04N user manual 21APPN004 Application Note: ELinOS demo-em04-001, simple demo project for EM04 21APPN005 Application Note: ELinOS demo-em04-000, X-Window/RTAI demo project for EM04 21APPN006 Application Note: ELinOS demo-em04-002, simple demo project for EM04 For the most up-to-date ordering information and direct links to other data sheets and downloads, see the EM04N online data sheet under www.men.de. --> Click here! ® 6 Embedded Solutions EM04N Data Sheet - 2004-12-23 Contact Information Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2005 MEN Mikro Elektronik GmbH. All rights reserved. ® Embedded Solutions