F7N Data Sheet - 2004-08-27 F7N - 3U/6U CompactPCI/PXI Pentium III SBC (Tualatin) u Tualatin Celeron/Pentium III up to 1.26GHz u 1-slot 32-bit CompactPCI system master u PXI system controller u 512MB DRAM, CompactFlash u Graphics controller/digital video output u Gigabit Ethernet u USB u 2 COMs, IDE, floppy, parallel keyboard/mouse via extension card u On-board hard disk via extension card u Extension kit for 6U systems Equipped with a Tualatin Celeron or Pentium III of peripheral devices (such as keyboard, mouse, processor, the F7N is a powerful 3U CPU board based on printer, modem, or video camera). For high-speed Socket 370. Although offering a complete PC with networking, the F7N features a Gigabit Ethernet additional industrial features, the board still needs interface. All connections mentioned above are only one slot on the backplane. It is a perfect match conveniently available at the card's front panel. for any CompactPCI system as a system-slot card, with For mass storage, the F7N provides an Ultra ATA/66 the system slot being placed either left or right in EIDE interface, suitable for any EIDE hard disk and CD- the enclosure.ROM drive. An onboard CompactFlash slot allows use of For 6U CompactPCI and PXI systems the F7N is available silicon disks. The jumperless board can be used with a with a special mounting kit including a 6U front panel.front-side bus clock of up to 133MHz. The board is provided with the 815G chip set, which Equipped with a PCI-bridge chip, the F7N offers a full contains an embedded graphics controller. The DVI CompactPCI interface for reliable system expansion. interface allows for attachment of both advanced and Last but not least, the F7N's Phoenix BIOS was legacy flat-panel displays and CRT monitors. The especially designed for embedded system applications. onboard USB port is a universal interface to a variety ® 1 Embedded Solutions F7N Data Sheet - 2004-08-27 Technical Data CompactPCI Bus I/O Extension • 3U CompactPCI CPU board rev. 3.0 compliant • 4/8HP I/O extension board F7E for standard interfaces at • 32-bit CompactPCI system slot functionality with 7 front panel possible external loads due to PCI-to-PCI bridge · For expansion of F7N as a 2-slot 3U, or 1- or 2-slot 6U • PCI-to-PCI bridge solution using a special mounting kit • Single-slot solution · COM1/COM2 serial (9-pin D-Sub) • V(I/O): +5V (+3.3V on request) · Keyboard/mouse (PS/2) · LPT parallel (25-pin D-Sub) (only with 8HP I/O extension CPU board) • Celeron or Pentium III (Tualatin 0.13u) up to 1.26GHz · U-DMA66 via 44-pin connector for onboard hard disk, via • 100/133MHz host frequency 40-pin connector for external hard disk • Socket 370 · Floppy disk connection via 34-pin connector · Connection to F7N via 40-pin IDE and 26-pin LPC connectors Graphics • I/O extension card AD52 • Integrated VGA graphics controller and TFT support · For expansion of F7N as a 6U solution using a special · DVI-I connection at front panel mounting kit · PanelLink (R) Digital technology · Two serial interfaces (9-pin D-Sub), as RS232 COM1/COM2 · Maximum resolution: 1280 x 1024 true-color (or 1600 x or via serial interface adapters for flexible 1200, 8-bit color) configuration as RS232..TTY · Keyboard/mouse (PS/2) Memory · LPT parallel (26-pin connector) • Up to 512MB DRAM · Connection to F7N via 26-pin LPC connector · One 144-pin SO-DIMM socket for PC133, non ECC, unbuffered SDRAM Miscellaneous · 133MHz memory bus frequency • Battery-backed real-time clock • CompactFlash interface • Integrated hardware monitor · Type I and Type II • Reset button with "alive" LED at front panel · True IDE • Stand-alone operation possible with suitable MEN adapter Interfaces Electrical Specifications • Full-duplex 10/100/1000Base-TX PCI Ethernet controller • Supply voltage/power consumption: · 82540 controller · +5V (4.85V..5.25V), 5.8A max. (PIII / Celeron 1.26GHz) · RJ45 interface at front panel · +3.3V (3.2V..3.4V), 2.4A max. (PIII 1.26GHz), 2.2A max. · Three display LEDs in RJ45 connector to signal LAN (Celeron 1.26GHz) connection speed, LAN Link and Activity status · +12V (11.5V..12.5V), 0.45A max. (PIII / Celeron 1.26GHz) · Supports network boot · F7E: +5V (4.85V..5.25V), 1.75A max. (+80°C) • USB (Universal Serial Bus) interface • MTBF: 65,500h @ 50°C · Conforming to UHCI 1.1 · At front panelMechanical Specifications · Data throughput up to 12Mbits/s • Dimensions: conforming to CompactPCI specification for 3U boards PXI • Weight: • Two trigger lines compliant with PXI Specification · F7N: tbd. · F7E I/O extension board (4HP): 138g (without hard disk) Mass Storage · F7N and AD52 with 6U front panel: tbd. • Fast IDE ports · One IDE hard-disk/CD-ROM port via 40-pin ribbon cable Environmental Specifications connector U-DMA66 • Temperature range (operation): · One IDE port for local CompactFlash · 0..+60°C · Industrial temperature range on request · Airflow: min. 10m³/h ® 2 Embedded Solutions F7N Data Sheet - 2004-08-27 Technical Data • Temperature range (storage): -40..+85°C • Relative humidity (operation): max. 95% non-condensing • Relative humidity (storage): max. 95% non-condensing • Altitude: -300m to + 3,000m • Shock: 15g/0.33ms, 6g/6ms • Vibration: 1g/5..2,000Hz Safety • PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC • Tested according to EN 55022 / 1999-05 (radio disturbance) and EN 55024 / 1999-05 (immunity) with regard to CE conformity Software Support • Phoenix BIOS for industrial applications • Windows NT, Windows 2000/XP, Embedded Windows • Linux (on request) • VxWorks • QNX (on request) • RTX (on request) ® 3 Embedded Solutions F7N Data Sheet - 2004-08-27 Diagram ® 4 Embedded Solutions F7N Data Sheet - 2004-08-27 Related Products Standard Hardware 02F007E06 F7E, I/O extension for F7N, keyboard/mouse, 2x serial, floppy, 3U/4HP (F7 system slot right or left), 0..+60°C 02F007E07 F7E, I/O extension for F7N, keyboard/mouse, 2x serial, floppy, 3U/4HP (F7 system slot right or left), -40..+85°C 02F007E08 F7E, I/O extension for F7N, keyboard, mouse, serial, parallel, floppy, 3U/8HP (F7 system slot right), 0..+60°C 02F007E09 F7E, I/O extension for F7N, keyboard, mouse, serial, parallel, floppy, 3U/8HP (F7 system slot right), -40..+85°C 02F007N00 F7N, CompactPCI/PXI 3U, single-board computer, Tualatin Celeron / 1.2GHz incl. passive heat sink, 0MB DRAM, Gigabit Ethernet, DVI graphics, USB, 0..+60°C 02F007N01 F7N, CompactPCI/PXI 3U, single-board computer, Tualatin Pentium III / 1.26GHz incl. passive heat sink, 0MB DRAM, Gigabit Ethernet, DVI graphics, USB, 0..+60°C Please refer to our 3U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0701-0009 Abk13.10.04 - nur intern; Preis wird nicht erhBuy:offen fexistierende Kunden Last Delivery:offen fexistierende Kunden Name: B.Schmitz Grund: Ersatz-Standardsystem 0701-0021 kann falle 3U-Karten verwendet werden ------------------------------------------------------------CompactPCI 19" 3U rack-mount enclosure, 3U 7-slot CompactPCI backplane, ATX power supply 0701-0018 CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 8-slot 3U CompactPCI backplane, system slot right, no rear I/O, space for hard-disk drive, floppy drive, 300W ATX power supply wide range 100..240VAC on front, 1U fan tray included Accessories 05A000-10 Keyboard/mouse Y-cable 0.1m, 6-pin Mini DIN plug to two 6-pin Mini DIN receptacles 05F007E00 Hard disk 2.5" installation kit for F7E ® 5 Embedded Solutions F7N Data Sheet - 2004-08-27 Related Products 05F007N00 6U mounting kit for assembly of F7N + AD52-04/..-05 05F007N01 6U mounting kit for assembly of F7N + AD52-06/..-07 05F007N02 6U 1-slot mounting kit for assembly of F7N + F7E 05F007N03 Stand-alone adapter for F7 and F7N 05F007-02 DVI-to-VGA cable, DVI plug to 15-pin HD-Sub plug, 2m, -40..+85°C 05F007-03 Adapter, DVI analog plug to VGA 15-pin HD-Sub receptacle, -20..+85°C 0501-0001 DVI-I to DVI-D and VGA Y-adapter cable (for example for D4, F7/N, F8, F9, P17) You can download the data sheet for hard disk 0710-0012 from MEN's website. 0710-0009 IDE hard disk 2.5", 9.5mm, 20GB; for mounting on-board (harddisk mounting kit may be additionally required) 0710-0012 Industrial IDE hard disk 2,5", 40GB, 24 hours/7 days, 0..+60°C; for on-board mounting (hard disk mounting kit may be required additionally) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0044 256MB DRAM 0..+60°C for 02F007N01 0752-0081 256MB DRAM 0..+60°C for 02F007N00 0752-0094 512MB DRAM 0..+60°C for 02F007N01 0752-0152 512MB DRAM 0..+60°C for 02F007N00 08AD52-04 AD52, adapter for F7N: 2x RS232, keyboard/mouse, temperature range: 0..+60°C 08AD52-05 AD52, adapter for F7N: 2x RS232, keyboard/mouse, temperature range: -40..+85°C 08AD52-06 AD52, adapter for F7N: 2x SA-adapter slots, keyboard/mouse, temperature range: 0..+60°C 08AD52-07 AD52, adapter for F7N: 2x SA-adapter slots, keyboard/mouse, temperature range: -40..+85°C ® 6 Embedded Solutions F7N Data Sheet - 2004-08-27 Related Products 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 10F007N61 VxWorks 5.5 / Tornado 2.2 BSP for MEN F7N/F7 10F007N70 Windows 2000/XP Driver Package for MEN's F7N This MEN board is designed to work in a Microsoft Windows environment. For additional Windows driver packages provided or recommended by MEN please refer to the ordering numbers below. This board is an MEN product running Sysgo's ELinOS Embedded Linux. Sysgo provides full support for MEN hardware. Please contact www.sysgo.de. QNX software for this MEN board is available from QNX (www.qnx.com). For QNX BSP and driver support provided by MEN please refer to the ordering numbers below. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. This board is an MEN product running Linux. For Linux BSP and driver support provided by MEN please refer to the ordering numbers below. To use MDIS4 low-level drivers, you also need one of the MDIS4 system packages available for Windows, Linux, VxWorks, QNX, RTX or OS-9 (MDIS4 = MEN Driver Interface System). 13Z011-06 MDIS4/2004 low-level driver sources for F7/F7N/D4/EM02 watchdog 13Z011-70 MDIS4/2004 Windows NT4/W2K driver for F7/F7N/D4/EM02 watchdog Documentation 20ABMX-00 Phoenix BIOS user manual ® 7 Embedded Solutions F7N Data Sheet - 2004-08-27 Related Products 20APPN001 Application Note: Using MEN +5V CompactPCI Boards with +3.3V V(I/O) 20F007N00 F7N user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the F7N online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 8 Embedded Solutions