B12 Data Sheet - 2004-10-27 B12 - 3U VMEbus PowerPC SBC n MPC823e/66MHz n 1-slot VMEbus master/slave or busless n 128MB DRAM, 32MB Flash, CompactFlash n 10Mbit Ethernet n 3 COMs, 3 CAN n 1 M-Module slot n CANopen support n Full EN50155 compliance The B12 is a VMEbus single Eurocard industrial of the MPC823e. These include two RS232 ports and a computer designed to operate under harsh environmental 10Base-T Ethernet interface on the board. In addition, conditions, e.g. in trains.the B12 offers three CAN controllers and an RS422/485 The B12 is controlled by a PowerPC MPC823e interface accessible at the front panel. All of these microprocessor which operates at 66MHz. It provides interfaces are optically isolated. 32MB SDRAM for data and up to 32MB Flash memory for The B12 CPU board is prepared for master and slave program storage.operations on the VMEbus. It is equipped with a real- 32KB non-volatile FRAM can be used to periodically time clock, temperature sensor and a voltage store operating data. There is no loss of operating supervisor. Board configuration data is stored in a data if system power is switched off.4kbit serial EEPROM. The B12 gives access to the serial communication ports The B12 is fully compliant with EN50155 and thus an ideal computer for railway applications. ® 1 Embedded Solutions B12 Data Sheet - 2004-10-27 Technical Data CPU n VME requester n PowerPC Miscellaneouso MPC823e n Real-time clocko 66MHz CPU clock n Watchdogo 33MHz memory clock n Four front-panel LEDs Memoryn Reset button at front panel n SDRAM 32MBn Temperature sensor for in-system diagnosis o 32 bits Electrical Specificationso 3.3V n Supply voltage/power consumption:n Flash up to 32MB o +5V (4.75V..5.25V), 0.6A typ.o 32 bits n MTBF: tbd. @ 50°Co 3.3V n Non-volatile FRAM 32KB Mechanical Specifications o 8 bits n Dimensions: standard single Eurocard, 100mm x 160mm o 5V n Weight: 160g n Serial EEPROM 4kbit o For factory settings Environmental Specifications n CompactFlash (TM) interface (true IDE) n Temperature range (operation): n PCMCIA/PC-Card interface o 0..+60°C or -40..+85°C o Airflow: min. 10m³/h Interfaces n Temperature range (storage): -40..+85°C n Two serial RS232 interfaces COM1/COM2 n Relative humidity range (operation): max. 95% o Optically isolated non-condensing o One 9-pin D-Sub connector at front panel n Relative humidity range (storage): max. 95% non-condensing n Ethernet n Altitude: -300m to + 3,000m o 10Base-T n Shock: 15g/0.33ms, 6g/6ms o One RJ45 connector at front panel n Vibration: 1g/5..2,000Hz n IDE o For external hard disk drives Safety o Ribbon cable connection n PCB manufactured with a flammability rating of 94V-0 by n Three SJA1000 CAN controllers UL recognized manufacturers o CAN 2.0B functionality, Extended CAN o Max. data rate 1Mbits/s (ISO high speed)EMC o Ribbon cable connection or via single adapter cards at n Tested according to EN 55022 / 1999-05 (radio front panel (on request) disturbance) and EN 55024 / 1999-05 (immunity) with n One serial RS422/RS485 interface COM3 regard to CE conformity o Half-duplex or full-duplex operation o Physical interface using SA adapter via 10-pin ribbon Software Support cable, RS232..RS485, isolated or not, for free use in n MENMON system (cable to front or back)n VxWorks n OS-9 M-Module Extension n One M-Module mezzanine extension slot n Compliant with M-Module Standard n Characteristics: A08, D16, INTA VMEbus n Master D08(EO):D16:A24:A16:RMW; transfer rate max. 7MB/s n Slave D08(EO):D16:A24:BLT n Interrupter D08(O):I(7-1):ROAK n Interrupt handler D08(O):IH(7-1) n Slot-1 autodetection n Level 3 arbiter, bus timer, arbitration timer ® 2 Embedded Solutions B12 Data Sheet - 2004-10-27 Diagram ® 3 Embedded Solutions B12 Data Sheet - 2004-10-27 Related Products Standard Hardware 01B012-02 B12, VMEbus 3U, MPC823/66MHz, 32MB SDRAM, 8MB Flash, 32KB SRAM, 4KB EEPROM, CompactFlash slot Type I, 2 RS232, Ethernet, 4 LEDs, 1 push button, M-Module slot, 1-slot front panel EMC, temperature range: 0..+60°C 01B012-03 B12, VMEbus 3U, MPC823/66MHz, 32MB SDRAM, 8MB Flash, 32KB SRAM, 4KB EEPROM, CompactFlash slot Type I, 2 RS232, Ethernet, 4 LEDs, 1 push button, M-Module slot, 1-slot front panel EMC, temperature range: -40..+85°C, E2 suitable components Please refer to our 3U VMEbus compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0700-0004 CE-conformal housing for VMEbus 3U: MENCOMP6-BGT: closed 19" rack, 4U, 9 slots, J1 backplane, power supply 230V, fan, incl. power cable no. 6080-0020 0700-0009 CE-conformal housing for VMEbus 3U: closed 19" rack, 4U, 9 slots, J1 backplane, power supply 230V, fan Accessories 05B012-00 Accessory kit for B12: 2-slot front panel, mounting kit for 1 M-Module and 1 SA adapter, cover plates for M-Module and SA adapter 05M000-17 25 mounting screw sets to fix M-Modules on carrier boards 0500-0001 Battery M4T32... for Timekeeper M41T11 (spare part) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 CompactFlash card, 64MB, -40..+85°C 0751-0014 CompactFlash card, 128MB, -40..+85°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C ® 4 Embedded Solutions B12 Data Sheet - 2004-10-27 Related Products 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 10B012-01 OS-9(000) 3.x: BSP for B12 (object code, MEN) 10B012-60 VxWorks® V.5.4(.2) / Tornado 2.(0.2) BSP for B12 VxWorks® software for this MEN board is available from WindRiver Systems. This does not imply that the complete board functions have been tested in this environment, nor that specific MEN BSP or driver packages are available. If you don't find ordering numbers for additional VxWorks® BSP or driver packages provided or recommended by MEN, please contact sales. For OS-9 BSP and driver support provided by MEN please refer to the ordering numbers below. MEN has vast experience with CANopen-based implementations on standard and custom boards and systems. The CANopen protocol stack on MEN solutions runs under Windows®, Linux, VxWorks®, QNX®, OS-9 and other software environments. You will find more information about CANopen under www.can-cia.org/canopen. 14B012-00 MENMON (Firmware) for B12 (object code) You can download the data sheet for the MENMON firmware for PowerPC platforms from MEN's website. Documentation 20B012-00 B12 user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the B12 online data sheet under www.men.de. --> Click here! ® 5 Embedded Solutions B12 Data Sheet - 2004-10-27 Contact Information Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2005 MEN Mikro Elektronik GmbH. All rights reserved. ® Embedded Solutions