Manufacturers
MEDER ELECTRONIC MK13-1B90C-500W
Description
SENSOR MAGNETIC FLAT PACK
Part Number
MK13-1B90C-500W
Price
Request Quote
Manufacturer
MEDER ELECTRONIC
Lead Time
Request Quote
Category
PRODUCTS - M
Datasheet
Extracted Text
MEDER electronic MK13 Series Reed Sensors with Screw Fastening Mounting Holes DESCRIPTION MK13 sensors are magnetically operated Reed proximity switches in a case with an interconnect cable. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. APPLICATIONS • Position and limit switch Pneumatic or hydraulic actuator position • End motion detection for linear drive Indication and end travel limit switch • Machine industry End motion detection and door/flap control FEATURES • Form A, B, and C available • High power switches available • Other cables, connectors and colors available • Various case sizes available • Five operate sensitivities available • A choice of cable terminations and lengths are available DIMENSIONS All dimensions in mm [inches] www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 MK13 Series MEDER electronic Reed Sensors with Screw Fastening Mounting Holes ORDER INFORMATION Part Number Example CABLE CONTACT SWITCH MAGNETIC SERIES LENGTH TERMINATION FORM MODEL SENSITIVITY MK13 - 1A71 C - 500 W (mm) MK13 - XX XX X - XXX X 1A is the contact form 71 is the switch model 71 B, C, D, E C is the magnetic sensitivity 500 is the cable length (mm) 1 Form A 81 A W is the termination OPTIONS 500 * W, X, Y 84 C, D, E 1 Form B 90 1 Form C * Other cable lengths available. MAGNETIC SENSITIVITY SENSITIVITY PULL IN CLASS AT RANGE A 5 - 10 B 10 - 15 C 15 - 20 D 20 - 25 E 25 - 30 TERMINATION For wire and termination details please consult factory. Form C version requires 3 conductors. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic MK13 Series Reed Sensors with Screw Fastening Mounting Holes CONTACT DATA Switch Model --> Contact 71 Contact 81 0 All data at 20 C Contact Form --> Form A Form A Contact Ratings Conditions Min. Typ. Max. Min. Typ. Max. Units Any DC combination of V & A Contact Rating not to exceed their individual 10 5 W max.'s Switching Voltage DC or peak AC 200 90 V Switching Current DC or peak AC 0.5 0.5 A Carry Current DC or peak AC 1.25 1.0 A Static Contact Resistance w/ 0.5V & 10mA 150 200 mΩ Measured w/ 0.5V & 50mA Dynamic Contact Resistance 200 200 mΩ 1.5 ms after closure Insulation Resistance across 10 9 Ω 100 Volts applied 10 * 10 Contacts Breakdown Voltage across Voltage applied for 60 sec. 225 * 100 VDC Contacts min. Operate Time, incl. Bounce Measured w/ 100% overdrive 0.5 0.5 ms Measured w/ no coil Release Time 0.1 0.1 ms suppression Capacitance @ 10kHz across contact 0.2 0.2 pF Contact Operation ** Must Operate Condition Steady state field 10 30 5 10 AT Must Release Condition Steady state field 4 27 2 9 AT Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 30 g Vibration Resistance From 10 - 2000 Hz 20 10 g 0 0 Ambient Temperature 10 C/ minute max. allowable -20 85 -20 85 C 0 0 Storage Temperature 10 C/ minute max. allowable -35 85 -35 85 C 0 Soldering Temperature 5 sec. dwell 260 260 C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. 12 * Insulation resistance of 10 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 MK13 Series MEDER electronic Reed Sensors with Screw Fastening Mounting Holes CONTACT DATA Switch Model --> Contact 84 Contact 90 0 All data at 20 C Contact Form --> Form A Form B / C Contact Ratings Conditions Min. Typ. Max. Min. Typ. Max. Units Any DC combination of V & A Contact Rating not to exceed their individual 10 3 W max.'s Switching Voltage DC or peak AC 400 175 V Switching Current DC or peak AC 0.5 0.25 A Carry Current DC or peak AC 1.0 1.2 A Static Contact Resistance w/ 0.5V & 10mA 150 150 mΩ Measured w/ 0.5V & 50mA Dynamic Contact Resistance 200 250 mΩ 1.5 ms after closure Insulation Resistance across 11 9 100 Volts applied 10 10 Ω Contacts Breakdown Voltage across Voltage applied for 60 sec. 700 200 VDC Contacts min. Operate Time, incl. Bounce Measured w/ 100% overdrive 2.0 0.7 ms Measured w/ no coil Reset Time 0.1 1.5 ms suppression Capacitance @ 10kHz across contact 0.7 1.0 pF Contact Operation ** Must Operate Condition Steady state field 15 30 10 35 AT Must Reset Condition Steady state field 6 27 4 30 AT Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 50 g Vibration Resistance From 10 - 2000 Hz 20 20 g 0 0 Ambient Temperature 10 C/ minute max. allowable -20 85 -20 85 C 0 0 Storage Temperature 10 C/ minute max. allowable -35 85 -35 85 C 0 Soldering Temperature 5 sec. dwell 260 260 C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MK13-1B90C-500W have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods