0.75% TEB UltraStable 600 UltraStable 600 UltraStable 600 High Stability Stainless Steel Pressure Transducer The UltraStable 600 from Schaevitz Sensors, a division of Measurement Specialties, incorporates an ultra-rugged IP 67 rated housing. All wetted parts are constructed of 316L stainless steel, providing media isolation and no internal “O” rings. The UltraStable 600 also offers a wide selection of standard pressure ranges Features and electrical outputs. The unit's high ✦0.75% TEB (Total Error Band) with .5% TEB stability rating is provided by IC Sensors' available as an option solid state UltraStable technology, which ✦ 0.1% Accuracy - typically provides stability over a wide temperature range. The modular design ✦-50 to 125º C Operating Temperature is adaptable to an infinite number of port ✦100% stainless steel isolation. Small size variations, and standard outputs include .5V to 4.5V ratiometric, 0V to 5V, 1V to ✦Wide variety of pressure ranges and 5V, 0V to 10V, regulated and 4 to 20mA electrical outputs current loop. ✦ Broad assortment of standard connectors and ports The UltraStable's small size vs. high performance enables the miniaturization ✦ UltraStable sensing technology of high accuracy pressure and vacuum ✦ CE versions available systems. The unit's new low-pressure ranges add sensitivity that has ✦ Custom verisons available previously been unavailable in ✦ Ranges starting from 15 psi FS transducers of this size. The competitive price, coupled with its high accuracy,✦High field Interchangeability may make the UltraStable 600 the best Applications choice for your application. Field replacement can easily be ✦ Refrigeration and HVAC controls performed without sacrificing accuracy ✦ Process control due to the very small total error band of .75% max. ✦ Marine systems ✦ Tank level ✦ Industrial machinery A Division of ✦ Calibration equipment www.msiusa.com 04/02 UltraStable 600 UltraStable 600 UltraStable 600 Static Performance Specifications Units Amplified Ratiometric Amplified Amplified Notes 0.5 - 4.5 V out 0-5 V, 1-5 V, 0-10 V out 4 to 20 mA , two wire Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Supply voltage V 4.75 5 5.25 8 30 10 30 1 Supply Current mA 2.5 3 3.5 2.5 3 3.5 20 Min load impedance 100 K ohm 100 K ohm Max load impedance RL=50* (Vsupply-10) Accuracy %FS -0.1 +0.1 -0.1 +0.1 -0.1 +0.1 3, 4 Offset %FS -0.5 +0.5 -0.5 +0.5 -0.5 +0.5 2 Span %FS -0.5 +0.5 -0.5 +0.5 -0.5 +0.5 2 Long Term stability %FS/year 0.1 0.1 0.1 Response time ms 1.0 1.0 1.0 Isolation Resistance M ohm 50 50 50 5 Notes: 1) Supply voltage must be 12 V for units with 10 V out. 4) Over temp range -20 to +85º C 2) Room temperature calibration. 5) @ 50 V DC 3) Combined BFSL, hysteresis and repeatability (Per ISA S37.2) .25% for 1Kpsi and above Environmental Performance Specification Min. Typ. Max. Notes Total error band -20 to +85º C, -7 to 185º F -0.75 %FS 0.50 %FS +0.75 %FS 1, 3, 4 Operating temperature range -50ºC 125ºC -58ºF 257º F 2,3 Storage temperature range -50ºC 125ºC -58ºF 257º F 2 Notes: 1) With reference to 25 º C, (77 º F) 3) Lower ranges available - consult factory 2) Standard 105º C max. for cable version 4) 0.5% max availability - consult factory ® Schaevitz Sensors Division of Measurement Specialties 1000 Lucas Way A Division of Hampton, VA 22666 1-800-745-8008 Phone: 757-766-1500 www.msiusa.com 02/02 UltraStable 600 UltraStable 600 UltraStable 600 Mechanical Specifications Specification Value Notes Proof pressure 3x rated pressure Burst pressure 4x rated pressure or 20k psi 2 Vibration 20 G’s rms @2kHz Shock 100G 11ms Pressure cycles 1 million cycles 0 to full scale Media compatibility All materials compatible with 316 stainless steel 1 Environmental protection IP 67 (Cable version) 1)Other materials available - consult factory 2) Which ever is less, 10X burst available on some pressure ranges (consult factory) Ordering Information Electrical US6 Output Connection Specials Port type Pressure range Pressure unit US6 X X - XXXXX X - XXXX X Output Connection Specials Port Pressure Range Pressure Units 3=.5 to 4.5V ratio (1) 1=Cable 2 feet For Non-Standard 2= 1/4-19 BSP PSI Ranges Bar Ranges A = absolute 4= 1 to 5V 4 = Integral Packard G = gauge the standard num- 4= 7/16-20 UNF 001B = 0 to 1 Bar 6= 0 to 5V 5 = PTIH-10-6P ber of “00000” 5=1/4-18 NPT 015P = 0 to 15 psi 7= 0 to 10V (Bendix style) changes to a higher 6= 1/8-27 NPT 002B = 0 to 2 Bar 030P = 0 to 30 psi 8=4-20 mA 6 = GSSR 300 (9.4 value .i.e 1XXXX 005B = 0 to 5 Bar 050P = 0 to 50psi mm) (Square 007B = 0 to 7 Bar 100P =0 to 100psi 010B = 0 to 10 Bar X=Special output Hirshman) Special numbers X= special port 300P = 0 to 300psi 8 = PTIH-08-4P starting with a “C” 020B = 0 to 20 Bar 500P - 0 to 500psi (Bendix Style) are CE rated 035B = 0 to 35 Bar 01KP = 0 to 1Kpsi 070B = 0 to 70 Bar x = Special 03KP = 0 to 3Kpsi Connection 200B = 0 to 200 Bar 05KP = 0 to 5Kpsi 350B = 0 to 350 Bar Example: 1) For ratiometric output, span changes with input voltage US664-000005-100PG is an UltraStable 600 with 0 to 5V out, Packard (see supply voltage specifications) Connector, nothing special, 1/4 NPT pressure port and 100 psi gage. US681-C00002- 005PG is an UltraStable 600 with 4-20 mA, 2-wire, output, 2 feet of cable, CE certified, 1/4 BSP male pressure port and 5 psi gage. ® Schaevitz Sensors Division of Measurement Specialties 1000 Lucas Way A Division of Hampton, VA 22666 1-800-745-8008 Phone: 757-766-1500 www.msiusa.com 02/02 UltraStable 600 UltraStable 600 UltraStable 600 6-pin 4-pin ţ .875 ţ .875 ţ .875 www.powerandsignal.com Note: Mating connector is available with 3 ft of cable PN (2001140). ® Schaevitz Sensors Division of Measurement Specialties 1000 Lucas Way A Division of Hampton, VA 22666 1-800-745-8008 Phone: 757-766-1500 www.msiusa.com 02/02