MEAN WELL ULP-150-12
Specifications
AC CURRENT (Typ.)
2A/115VAC 1A/230VAC 0.7A/277VAC
DC VOLTAGE
12V
DIMENSION
215*67.4*33mm (L*W*H)
EFFICIENCY (Typ.)
91.5%
FREQUENCY RANGE
47 ~ 63Hz
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC at full load
INRUSH CURRENT (Typ.)
Cold start 65A/230VAC
LINE REGULATION
0.5%
LOAD REGULATION
1.0%
OVER LOAD
130~185% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
13.6 ~ 16.3V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
POWER FACTOR (Typ.)
PF 0.98/115VAC PF>0.96/230VAC PF 0.94/277VAC at full load
RATED CURRENT
12.5A
RATED POWER
150W
RIPPLE & NOISE (max.)
100mVp-p
SETUP, RISE TIME
2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load
VOLTAGE ADJ. RANGE
11.0~13.2V
VOLTAGE RANGE
90 ~ 295VAC 127 ~ 417VDC
VOLTAGE TOLERANCE
2.0%
Features
- Built in active PFC compliance to EN61000-3-2 class C
- Constant Voltage design
- Cooling by free air convection
- Half encapsulated
- High efficiency up to 93%
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Suitable for built-in type LED applications
- U-bracket low profile:33mm
- Universal AC input / Full range(up to 295VAC)
- ZVS technology to reduce power dissipation
Datasheet
MeanWell-ULP-150series-ds-1927428026.pdf
287 KiB
Extracted Text
150W U-Bracket Single Output with PFC Function ULP-150 series Features : Universal AC input / Full range(up to 295VAC) Built in active PFC compliance to EN61000-3-2 class C Constant Voltage design High efficiency up to 93% Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Half encapsulated U-bracket low profile:33mm ZVS technology to reduce power dissipation Suitable for built-in type LED applications 3 years warranty SPECIFICATION MODEL ULP-150-15 ULP-150-24 ULP-150-36 ULP-150-12 ULP-150-48 DC VOLTAGE 15V 24V 36V 48V 12V RATED CURRENT 10A 6.3A 4.2A 3.2A 12.5A CURRENT RANGE 0 ~ 10A 0 ~ 6.3A 0 ~ 4.2A 0 ~ 3.2A 0 ~ 12.5A RATED POWER 150W 151.2W 151.2W 153.6W 150W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 250mVp-p 250mVp-p 100mVp-p 13.5~16.5V 21.6~26.4V 32.4~39.6V 43.2~52.8V OUTPUT VOLTAGE ADJ. RANGE 11.0~13.2V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF 0.98/115VAC PF>0.96/230VAC PF 0.94/277VAC at full load INPUT EFFICIENCY (Typ.) 91.5% 91.5% 93% 93% 93% AC CURRENT (Typ.) 2A/115VAC 1A/230VAC 0.7A/277VAC Cold start 65A/230VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT <0.75mA / 277VAC 130~185% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 17 ~ 21V 26.7 ~ 32.4V 41.4 ~ 48.6V 53 ~ 64.8V 13.6 ~ 16.3V OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 95 5 (RTH2) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -30 ~ +70 (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS Design refer to EN61347-2-13,IEC61347-2-13,UL8750 WITHSTAND VOLTAGE Note.6 I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25 / 70%RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C( 60% load),EN61000-3-3 (Note 5) EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A MTBF 216.3K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 215*67.4*33mm (L*W*H) PACKING 0.67kg; 24PCS/17.5kg/0.65CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Please remove the component D1 before conducted Hipot test. File Name:ULP-150-SPEC 2011-08-11 150W U-Bracket Single Output with PFC Function ULP-150 series Mechanical Specification Case No. 988 Unit:mm 7.5 4.5 4PL 194 3.5 3.5 208 215 33 211 201 1 1 2 2 3 3 4 3.5 4PL DC Terminal pin NO. Assignment AC Terminal pin NO. Assignment Terminal Pin No. Assignment Pin No. Assignment Terminal 1 V- 1 FG DECA 2 V- DECA 2 AC/L T31-C032033702 T31-C032043702 3 V+ 3 AC/N 4 V+ Block Diagram POWER SYNCHRONOUS +V EMI BRIDGE APFC I/P SWITCH- RECTIFIERS RECTIFIERS FILTER CONTROLLER -V ING & FILTER O.T.P. FG DETECTION CIRCUIT PWM O.L.P. CONVERTER O.V.P. Derating Curve Static Characteristics 100 130 Mount with a 300*500*2mm heatsink 90 100 80 80 70 100VAC 60 230VAC 60 40 50 20 40 -30 0 10 20 30 40 45 50 55 60 65 70 (HORIZONTAL) 90 100 110 135 155 230 295 INPUT VOLTAGE (V) 60Hz AMBIENT TEMPERATURE ( ) File Name:ULP-150-SPEC 2011-08-11 LOAD (%) 6.2 7.62 6.5 LOAD(%) 7.62 6.2 52 62.7 67.4
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ULP-150-12 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods