100W Single Output Switching Power Supply HVG -100 s e ri e s Features : Wide input range 180~480VAC Built-in active PFC function High efficiency up to 91% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Class 2 power unit Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.8) ( for 42V,48V,54V only) ( except for 42V,48V,54V ) I P 6 5 I P 6 7 HVG-100-15 A A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL HVG-100-15 HVG-100-20 HVG-100-24 HVG-100-30 HVG-100-36 HVG-100-42 HVG-100-48 HVG-100-54 DC VOLTAGE 15V 20V 24V 30V 36V 42V 48V 54V RATED CURRENT 5A 4.8A 4A 3.2A 2.65A 2.28A 2A 1.77A RATED POWER 75W 96W 96W 96W 95.4W 95.76W 96W 95.58W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.5 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V Can be adjusted by internal potentiometer or through output cable OUTPUT CURRENT ADJ. RANGE 2.75 ~ 5A 2.64 ~ 4.8A 2.2 ~ 4A 1.76 ~ 3.2A 1.45 ~ 2.65A 1.25 ~ 2.28A 1.1 ~ 2A 0.97 ~ 1.77A VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 2500ms, 80ms at full load 440VAC / 347VAC ; B type 3000ms, 280ms at 95% load 440VAC / 347VAC HOLD UP TIME (Typ.) 30ms at full load 440VAC / 347VAC VOLTAGE RANGE Note.4 180 ~ 480VAC 254VDC ~ 679VDC FREQUENCY RANGE 47 ~ 63Hz PF 0.98/230VAC, PF 0.98/277VAC, PF 0.97/347VAC, PF 0.94/440VAC (PF 0.93/440VAC only for 15V model) POWER FACTOR (Typ.) at full load (Please refer to "Power Factor Characteristic" curve) INPUT EFFICIENCY (Typ.) 89% 91% 90.5% 91% 91% 90% 91% 90.5% AC CURRENT (Typ.) 0.32A / 347VAC 0.26A / 440VAC INRUSH CURRENT (Typ.) COLD START 50A / 440VAC LEAKAGE CURRENT <0.75mA / 440VAC 95 ~ 108% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT 34 ~ 38V 47 ~ 53V 59 ~ 65V PROTECTION 18 ~ 21V 23 ~ 27V 28 ~ 34V 41 ~ 46V 54 ~ 60V OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 100 10 (RTH2) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.6 UL8750, CSA C22.2 No. 250.0-08(except for 42V,48V, 54V), IP65 or IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( 50% load, 60% load only for 15V model ) ; EN61000-3-3, FCC part 15 class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A MTBF 174.9Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 236*68*38.8mm (L*W*H) 1.18Kg; 12pcs/15.2Kg/0.74CUFT PACKING 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Type A only. 6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. Refer to warranty statement. File Name:HVG-100-SPEC 2012-03-20 100W Single Output Switching Power Supply HVG -100 s e ri e s Mechanical Specification Case No.994 Unit:mm A Type:(HVG-100-_A) 236 12 212 9.6 Vo Io ADJ. ADJ. 300 20 FG (Green/Yellow) T case 104.4 300 20 AC/L(Brown) +V(Red) AC/N(Blue) STW 18AWG 3C -V(Black) SVT 18AWG 2C 4.2 4PL T case: Max. Case Temperature. IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HVG-100-_B) 236 12 212 9.6 300 20 UL2517 18AWG 2C 300 20 DIM+(Blue) FG (Green/Yellow) T case DIM-(White) 104.4 AC/L(Brown) SVT 18AWG 2C AC/N(Blue) STW 18AWG 3C +V(Red) -V(Black) 4.2 4PL T case: Max. Case Temperature. D Type(option):(HVG-100-_D) 236 12 212 9.6 300 20 FG (Green/Yellow) T case 104.4 300 20 AC/L(Brown) +V(Red) AC/N(Blue) STW 18AWG 3C -V(Black) SVT 18AWG 2C 4.2 4PL T case: Max. Case Temperature. IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HVG-100-SPEC 2012-03-20 9.4 34.2 9.4 9.4 34.2 9.4 9.4 34.2 9.4 68 68 68 34 34 34 38.8 38.8 38.8 100W Single Output Switching Power Supply HVG -100 s e ri e s Block Diagram Fosc : 80KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- (B Type) DETECTION FG O.L.P. CIRCUIT PWM & PFC PFC CONTROL CONTROL O.V.P. O.T.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 180 347 440 480 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1 .0 0 0 .9 8 0 .9 6 0 .9 4 4 4 0 V 0 .9 2 3 4 7 V 0 .9 0 0 .8 8 2 7 7 V 0 .8 6 2 3 0 V 0 .8 4 0 .8 2 0 .8 0 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (100W) LOAD File Name:HVG-100-SPEC 2012-03-20 PF LOAD (%) LOAD (%) 100W Single Output Switching Power Supply HVG -100 s e ri e s EFFICIENCY vs LOAD (48V Model) HVG-100 series possess superior working efficiency that up to 91% can be reached in field applications. 0 . 9 6 0 . 9 2 0 . 8 8 0 . 8 4 4 4 0 V 0 . 8 0 3 4 7 V 0 . 7 6 2 7 7 V 0 . 7 2 2 3 0 V 0 . 6 8 0 . 6 4 0 . 6 0 1 0 % 2 0 % 3 0 % 4 0 % 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). 100 (A) Constant (B) Voltage area Constant Current area 50 (max.) 50 100 Io (%) Typical LED power supply I-V curve File Name:HVG-100-SPEC 2012-03-20 EFFICIENCY (%) Vo(%) 100W Single Output Switching Power Supply HVG -100 s e ri e s DIMMING OPERATION DIM+(Blue) FG (Green/Yellow) DIM-(White) AC/L(Brown) HVG-100 AC/N(Blue) +V(Red) -V(Black) Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) Single driver 10K 20K 30K 40K 50K 60K 70K 80K 90K 100K OPEN Resistance Multiple drivers value (N=driver quantity for synchronized 10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N ----- dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% 0 ~ 10V dimming function for output current adjustment (Typical) Dimming value 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HVG-100 to operate in dry/wet/damp or outdoor environment. AC HVG-100 source I/P O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M12 M15 4-PIN 5-PIN 2-PIN 5A/PIN 5A/PIN 12A/PIN Order No. M12-04 M12-05 Order No. M15-02 LED Lamp Suitable Current 10A max. 10A max. Suitable Current 12A max. File Name:HVG-100-SPEC 2012-03-20 100W Single Output Switching Power Supply HVG -100 s e ri e s Cable Joiner CJ04-1 suitable for 14AWG~16AWG 66 CJ04-2 suitable for 18AWG~22AWG 26 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVG-100 O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box(Option ) 208.8 76 10 370.8 5 FG (Green/Yellow) +V(Red) AC/L(Brown) -V(Black) AC/N(Blue) SVT 18AWG 2C STW 18AWG 3C 2- 5 3- PF 1/2" 3- PF 1/2" 150 20 150 20 86 Optional junction box available for A / Blank - type, please contact MEAW WELL for details. File Name:HVG-100-SPEC 2012-03-20 25 68 61 8.5 8.5 6 32 35 38.8