320W Single Output Switching Power Supply HL G - 3 2 0 H s eries Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 95% Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location 5 years warranty (Note.10) 110 F M M SELV I P 6 5 I P 6 7 HLG-320H-12 A Blank : IP67 rated. Cable for I/O connection. A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or PWM signal or resistance. C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-48 HLG-320H-54 DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V 18 ~ 36V 21 ~ 42V CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 15 ~ 30V 24 ~ 48V 27 ~ 54V 8.9A 7.65A RATED CURRENT 22A 19A 15A 13.34A 10.7A 6.7A 5.95A RATED POWER 264W 285W 300W 320.16W 321W 320.4W 321.3W 321.6W 321.3W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 21 ~ 26V 26 ~ 32V 32 ~ 39V 38 ~ 45V 43 ~ 52V 49 ~ 58V OUTPUT Can be adjusted by internal potentiometer or through output cable CURRENT ADJ. RANGE 4.45 ~ 8.9A 3.8 ~ 7.65A 11 ~ 22A 9.5 ~ 19A 7.5 ~ 15A 6.67 ~ 13.34A 5.35 ~ 10.7A 3.35 ~ 6.7A 2.97 ~ 5.95A 1.0% 1.0% VOLTAGE TOLERANCE Note.3 3.0% 2.0% 1.5% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.8 2500ms, 80ms at full load 230VAC /115VAC HOLD UP TIME (Typ.) 15ms at full load 230VAC /115VAC VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) (230Vac) 91% 92.5% 93.5% 94% 94% 94.5% 95% 95% 95% INPUT EFFICIENCY (Typ.) (277Vac) 91.5% 93% 94% 94.5% 94.5% 95% 95% 95% 95% AC CURRENT (Typ.) 3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC INRUSH CURRENT(Typ.) COLD START 75A/230VAC LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. 14 ~ 17V 17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V 33 ~ 37V 40 ~ 46V 46.5 ~ 53V 53.5 ~ 60V 59 ~ 65V PROTECTION OVER VOLTAGE Protection type : Shut down and latch off o/p voltage, re-power on to recover 100 10 (RTH2) OVER TEMPERATURE Protection type : Shut down and latch off o/p voltage, re-power on to recover -40 ~ +70 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80 , 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent (except for HLG-320H C type),IP65 or IP67, J61347-1, SAFETY STANDARDS Note.7 J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMC EMISSION Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A MTBF 157.1Khrs min. MIL-HDBK-217F (25 ) 252*90*43.8mm (L*W*H) OTHERS DIMENSION 1.88Kg; 8pcs/16Kg/0.83CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Type A and type C only. 7. Safety and EMC design refer to EN60598-1, subject CNS15233, GB7000.1, FCC part18. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 10. Refer to warranty statement. 320W Single Output Switching Power Supply HLG -320H series Mechanical Specification Case No.202A Unit:mm Blank:(HLG-320H) 252 13.4 225.2 8.9 300 20 300 20 FG (Green/Yellow) +V(Red) 112.6 T case AC/L(Brown) -V(Black) AC/N(Blue) SJTW 18AWG 3C SJTW 14AWG 2C 4.5 4PL T case: Max. Case Temperature. IP67 rated. Cable for I/O connection. A Type:(HLG-320H-_A) 252 13.4 225.2 8.9 300 20 300 20 FG (Green/Yellow) +V(Red) 112.6 T case AC/L(Brown) -V(Black) AC/N(Blue) Io Vo SJTW 18AWG 3C SJTW 14AWG 2C ADJ. ADJ. 4.5 4PL T case: Max. Case Temperature. IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) File Name:HLG-320H-SPEC 2012-04-17 17 17 17 40 17 40 90 90 45 45 43.8 43.8 320W Single Output Switching Power Supply HLG -320H series B Type:(HLG-320H-_B) 252 13.4 225.2 8.9 300 20 300 20 DIM+(Blue) FG (Green/Yellow) DIM-(White) 112.6 T case SJTW 14AWG 2C AC/L(Brown) +V(Red) AC/N(Blue) SJTW 18AWG 3C -V(Black) SJTW 18AWG) 2C 4.5 4PL T case: Max. Case Temperature. C Type:(HLG-320H-_C) 252 13.4 225.2 8.9 1 112.6 1 I/P 2 T case O/P 2 3 Io Vo ADJ. ADJ. 4.5 4PL T case: Max. Case Temperature. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) AC Input Terminal Pin No. Assignment DC Output Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 FG 1 +V 2 AC/L 2 -V 3 AC/N File Name:HLG-320H-SPEC 2012-04-17 9.5 7.5 17 17 17 40 17 40 90 90 45 45 43.8 43.8 320W Single Output Switching Power Supply HLG -320H series D Type(option):(HLG-320H-_D) 252 13.4 225.2 8.9 300 20 300 20 AC/L(Brown) +V(Red) 112.6 T case AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 18AWG 3C SJTW 14AWG 2C 4.5 4PL T case: Max. Case Temperature. IP67 rated. Timer dimming function, contact MEAN WELL for details. Block Diagram Fosc : 65KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- (B Type) DETECTION FG O.L.P. PWM & PFC CIRCUIT PFC CONTROL CONTROL O.V.P. Derating Curve Static Characteristics 230VAC 100 100 90 80 80 70 60 110VAC 60 40 50 20 40 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 305 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:HLG-320H-SPEC 2012-04-17 LOAD (%) 17 17 40 90 45 LOAD (%) 43.8 320W Single Output Switching Power Supply HLG - 320H series Power Factor Characteristic Constant Current Mode 1 0 .9 8 0 .9 6 0 .9 4 2 7 7 V A C 0 .9 2 0 .9 2 3 0 V A C 0 .8 8 1 1 5 V A C 0 .8 6 0 .8 4 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (320W) LOAD EFFICIENCY vs LOAD (48V Model) HLG-320H series possess superior working efficiency that up to 95% can be reached in field applications. 9 7 9 5 9 3 9 1 8 9 8 7 2 7 7 V A C 8 5 2 3 0 V A C 8 3 1 1 5 V A C 8 1 7 9 7 7 7 5 1 0 % 2 0 % 3 0 % 4 0 % 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). (B) 100 Constant Current area (A) Constant Voltage area 50 (C) Hiccup Protection 50 95 Io (%) Typical LED power supply I-V curve File Name:HLG-320H-SPEC 2012-04-17 PF EFFICIENCY (%) Vo(%) 320W Single Output Switching Power Supply HLG -320H series DIMMING OPERATION DIM+(Blue) FG (Green/Yellow) DIM-(White) AC/L(Brown) +V(Red) AC/N(Blue) HLG-320H -V(Black) Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) Single driver 10K 20K 30K 40K 50K 60K 70K 80K 90K 100K OPEN Resistance Multiple drivers value (N=driver quantity for synchronized 10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N ----- dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%~108% 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%~108% 10V PWM signal for output current adjustment (Typical): Frequency range :100HZ ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 98%~108% Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Adjuster Relay 0~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Blue DIM+ Green/ White HLG-320H DIM- Yellow AC/L Black Brown V(-) B Type Red LED Lighting Fixture AC/N V(+) Blue Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-320H-SPEC 2012-04-17 320W Single Output Switching Power Supply HLG -320H series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG-320H to operate in dry/wet/damp or outdoor environment. AC source HLG-320H I/P O/P Size Pin Configuration (Female) Size Pin Configuration (Female) M12 M15 4-PIN 5-PIN 2-PIN 5A/PIN 5A/PIN 12A/PIN Order No. M12-04 M12-05 Order No. M15-02 LED Lamp Suitable Current 10A max. 10A max. Suitable Current 12A max. Cable Joiner CJ04-1 suitable for 14AWG~16AWG 66 CJ04-2 suitable for 18AWG~22AWG 26 20 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-320H O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box(Option ) 225.2 76 10 387.2 5 FG (Green/Yellow) +V(Red) AC/L(Brown) -V(Black) AC/N(Blue) SJTW 14AWG 2C SJTW 18AWG 3C 2- 5 3- PF 1/2" 3- PF 1/2" 150 20 150 20 86 Optional junction box available for A / Blank - type, please contact MEAW WELL for details. File Name:HLG-320H-SPEC 2012-04-17 25 90 61 8.5 8.5 6 32 35 43.8