100W Single Output LED Power Supply CEN-100 s e ri e s ½ Features : Features : Universal AC input / Full range (up to 295VAC) Protections: Short circuit / Over current / Over voltage / Over temperature Output voltage and constant current level adjustable Built-in active PFC function IP66 design for indoor or outdoor installations Class 2 power unit Cooling by free air convection 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 3 years warranty 110 F SELV I P 6 6 ( for 48V,54V only) ( except for 48V,54V ) SPECIFICATION MODEL CEN-100-20 CEN-100-24 CEN-100-30 CEN-100-36 CEN-100-42 CEN-100-48 CEN-100-54 DC VOLTAGE 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT OPERATION VOLTAGE Note.5 13 ~ 20V 15.6 ~ 24V 19.5 ~ 30V 23.4 ~ 36V 27.3 ~ 42V 31.2 ~ 48V 35.1 ~ 54V RATED CURRENT 4.8A 4A 3.2A 2.65A 2.28A 2A 1.77A CURRENT RANGE 0 ~ 4.8A 0 ~ 4A 0 ~ 3.2A 0 ~ 2.65A 0 ~ 2.28A 0 ~ 2A 0 ~ 1.77A RATED POWER 96W 96W 96W 95.4W 95.76W 96W 95.58W RIPPLE & NOISE (max.) Note.2 2.0Vp-p 2.7Vp-p 3Vp-p 3.6Vp-p 4Vp-p 4.6Vp-p 5Vp-p OUTPUT VOLTAGE ADJ. RANGE (SVR1) 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 37 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE(SVR2) 3.12 ~ 4.8A 2.6 ~ 4A 2.08 ~ 3.2A 1.72 ~ 2.65A 1.48 ~ 2.28A 1.3 ~ 2A 1.15 ~ 1.77A VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% LOAD REGULATION 5.0% SETUP TIME 3000ms / 230VAC 5000ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) INPUT EFFICIENCY (Typ.) 88% 89% 90% 90% 90% 91% 91% AC CURRENT (Typ.) 1.4A/115VAC 0.7A/230VAC 0.5A/277VAC INRUSH CURRENT (Typ.) 60A/230VAC LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT 22.8 ~ 26V 28 ~ 32V 34 ~ 38V 41 ~ 46V 47 ~ 52V 54 ~ 60V 59 ~ 65V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 100 10 (RTH1) OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), TUV EN61347-1, EN61347-2-13, IP66, J61347-1, J61347-2-13 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC SAFETY & I/P-O/P, I/P-FG, O/P-FG: >100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( 65% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria A EMC IMMUNITY MTBF 519.5Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 195*62.5*40.5mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/1.11CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Constant current operation region is within 65% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. File Name:CEN-100-SPEC 2012-03-20 100W Single Output LED Power Supply CEN-100 s e ri e s Mechanical Specification Case No. 993A Unit:mm 195 10.5 174 7.6 300 20 300 20 Vo Io T case AC/L(Brown) 86 +V(Red) ADJ. ADJ. AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 18AWG 3C SVT 18AWG 2C 30.64 4.6 4PL T case: Max. Case Temperature. Block Diagram fosc : 42KHz(115VAC) 68KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -30 -25 -5 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 295 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:CEN-100-SPEC 2012-03-20 LOAD (%) 30.6 45 62.5 31.25 LOAD (%) 40.5 100W Single Output LED Power Supply CEN-100 s e ri e s Power Factor Characteristic Constant Current Mode 1 . 0 0 0 . 9 8 0 . 9 6 0 . 9 4 0 . 9 2 2 7 7 V a c 0 . 9 0 0 . 8 8 2 3 0 V a c 0 . 8 6 1 1 5 V a c 0 . 8 4 0 . 8 2 0 . 8 0 0 . 7 8 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % (100W) LOAD EFFICIENCY vs LOAD (48V Model) CEN-100 series possess superior working efficiency that up to 91% can be reached in field applications. 9 4 9 0 8 6 8 2 7 8 2 7 7 V a c 7 4 2 3 0 V a c 7 0 1 1 5 V a c 6 6 6 2 5 8 5 4 1 0 % 2 0 % 3 0 % 4 0 % 5 0 % 6 0 % 7 0 % 8 0 % 9 0 % 1 0 0 % LOAD DRIVING METHODS OF LED MODULE This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs. 100 Constant Current area 65 (max.) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:CEN-100-SPEC 2012-03-20 PF EFFICIENCY (%) Vo(%)