MAXSTREAM XBee-PRO PKG
Specifications
Connector Options
RPSMA (reverse polarity SMA)
Data Connection
Dependant upon model
Europe (EC)
ETSI(10 dBm max TX output)
Filtration Options
PAN ID, Channel & Destination/Source Addresses
Frequency Range
ISM 2.4 GHz
Impedance
50 ohms unbalanced
Indoor/Urban Range (w/ 2.1 dB dipole antenna)
up to 300 ft. (100 m)
Industry Canada (IC)
4214A-XBEEPRO
Interface Data Rate (software selectable)
1200 - 115200 bps(non-standard baud rates also supported)
Modulation
OQPSK (Offset Quadrature Phase Shift Keying)
Number of channels (software selectable)
12 Direct Sequence Channels
Operating Temperature
Dependant upon model
Outdoor RF line-of-sight Range (w/ 2.1 dB dipole antenna)
up to 1 mile (1.6 km)
Power Down Current
Dependant upon model
Power Supply Voltage
Dependant upon model
Receive Current
Dependant upon model
Receiver Sensitivity
-100 dBm (1% PER (Packet Error Rate))
RF Data Rate
250,000 bps
Size
4.500" x 2.750" x 1.125" (11.4cm x 7.0cm x 2.9cm)
Spread Spectrum
DSSS (Direct Sequence Spread Spectrum)
Supported Network Topologies
Peer-to-peer (no master/slave dependencies), Point-to-point, Point-to-multipoint & Mesh (coming soon)
Transmit Current
Dependant upon model
Transmit Power Output
60 mW (18 dBm)*, 100 mW (20 dBm) EIRP*
United States (FCC Part 15.247)
OUR-XBEEPRO
Weight
5.25oz (150 g)
Datasheet
Extracted Text
TM XBee-PRO PKG RF Modems TM ZigBee /IEEE 802.15.4 Stand-alone Radio Modems by MaxStream, Inc. XBee-PRO PKG™ RF Modems Interfaces Available TM Indoor/urban Range: up to 300’ (100 m) XBee-PRO PKG-R Outdoor line-of-sight Range: up to 1 mile (1.6 km) RS-232 Transmit Power Output: 100 mW (20 dBm) EIRP TM XBee-PRO PKG-U Operating Frequency: 2.4 GHz USB RF Data Rate: 250,000 bps Receiver Sensitivity: -100 dBm The benefits of the ZigBee & 802.15.4 protocols wrapped into one easy-to-use RF solution Easy-to-Use! No configuration is necessary for out-of-box RF operation. Simply feed data into one modem, then the data is sent out the other end of the wireless link. If more advanced functionality is needed, the modems support an extensive set of AT commands. Key Features Sample Applications Price-to-Performance Value. Security systems Due to innovations stamped in its design, the XBee-PRO & lighting controls yields 2-3x the range of standard ZigBee modems. This allows OEMs & integrators to cover more ground with fewer devices. Additionally, XBee-PRO Modems are easy-to-use and therefore greatly reduce the cost of data system development. Home automation & building control Receiver Sensitivity. MaxStream Modems 'hear' what others cannot; therefore supplying greater range and reliability in wireless links. For every 6 dB gained in TX power or RX sensitivity, OEMs Home appliances and integrators can double the range of a wireless link. & fire/CO2 alarms XBee-PRO modems outperform higher costing modems due in large part to range gained through superior RX sensitivity. Transmit Power Output. Monitoring of The XBee-PRO outputs 100 mW (20 dBm) EIRP while consuming only 300 mA current (5V power supply). remote systems Worldwide Acceptance. FCC (U.S.A.), IC (Canada) and ETSI (Europe) Sensor data capture Systems that contain XBee-PRO RF Modems can operate in embedded networks under the certifications obtained by MaxStream. No further testing is required. Contact MaxStream for more details. Call today! MaxStream - Free RF Consultation (866) 765-9885 toll-free in U.S. & Canada - Volume Discounts (801) 765-9885 worldwide - Development Kit Pricing www.maxstream.net TM XBee-PRO PKG 2.4 GHz RF Modems XBee-PRO PKG-R™ XBee-PRO PKG-U™ Specifications (RS-232) (USB) Indoor/Urban Range up to 300 ft. (100 m) (w/ 2.1 dB dipole antenna) Outdoor RF line-of-sight Range up to 1 mile (1.6 km) (w/ 2.1 dB dipole antenna) Transmit Power Output 60 mW (18 dBm)*, 100 mW (20 dBm) EIRP* Performance Receiver Sensitivity -100 dBm (1% PER (Packet Error Rate)) Interface Data Rate 1200 - 115200 bps (software selectable) (non-standard baud rates also supported) RF Data Rate 250,000 bps Frequency Range ISM 2.4 GHz Spread Spectrum DSSS (Direct Sequence Spread Spectrum) Modulation OQPSK (Offset Quadrature Phase Shift Keying) Networking Peer-to-peer (no master/slave dependencies), Point-to-point, & Security Supported Network Topologies Point-to-multipoint & Mesh (coming soon) Number of channels 12 Direct Sequence Channels (software selectable) Filtration Options PAN ID, Channel & Destination/Source Addresses Connector Options RPSMA (reverse polarity SMA) Antenna Impedance 50 ohms unbalanced United States (FCC Part 15.247) OUR-XBEEPRO Certifications Industry Canada (IC) 4214A-XBEEPRO (partial list) Europe (EC) ETSI (10 dBm max TX output) XBee-PRO PKG-R™ XBee-PRO PKG-U™ Power Supply Voltage 5 - 14 VDC USB bus power Transmit Current 300 mA (@ 9V) ** 300 mA *** Power Requirements Receive Current 80 mA 90 mA Power Down Current < 6 mA < 25 mA Size 4.500” x 2.750” x 1.125” (11.4cm x 7.0cm x 2.9cm) Physical Weight 5.25 oz (150 g) Properties Data Connection female DB-9 USB Operating Temperature -40 to 85º C (Industrial) 0 to 70º C (Commercial) * When operating in Europe: XBee-PRO Modems must be configured to operate at a maximum TX power output level of 10 dBm (power output level is set using the PL command). Additionally, European regulations stipulate an EIRP power maximum of 12.86 dBm (19 mW). ** Average current while streaming data (@9600 bps) = 86 mA *** Average current while streaming data (@9600 bps) = 92 mA Specifications are subject to change without notice. For the best in wireless data solutions and support, contact MaxStream, Inc. phone: (866) 765-9885 (toll-free in U.S. & Canada) MaxStream (801) 765-9885 (worldwide) 355 South, 520 West, ste. 180 fax: (801) 765-9895 Lindon, UT 84042 web: www.maxstream.net © 2005 MaxStream, Inc. (live chat & many other resources available)
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the XBee-PRO PKG have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods