Manufacturers
MAXIM MAX206CNG
Description
IC TRANSCEIVER RS232 5V 24-DIP
Part Number
MAX206CNG
Price
Request Quote
Manufacturer
MAXIM
Lead Time
Request Quote
Category
PRODUCTS - M
Datasheet
Extracted Text
MAX200–MAX211/MAX213 19-0065; Rev 6; 10/03 +5V, RS-232 Transceivers with 0.1µF External Capacitors General Description Next-Generation Device Features The MAX200–MAX211/MAX213 transceivers are ♦ For Low-Cost Applications: designed for RS-232 and V.28 communication inter- MAX221E: ±15kV ESD-Protected, +5V, 1µA, faces where ±12V supplies are not available. On-board Single RS-232 Transceiver with AutoShutdown™ charge pumps convert the +5V input to the ±10V need- ed for RS-232 output levels. The MAX201 and MAX209 ♦ For Low-Voltage and Space-Constrained operate from +5V and +12V, and contain a +12V to Applications: -12V charge-pump voltage converter. MAX3222E/MAX3232E/MAX3237E/MAX3241E/ The MAX200–MAX211/MAX213 drivers and receivers MAX3246E: ±15kV ESD-Protected, Down to 10nA, meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the ±5V +3.0V to +5.5V, Up to 1Mbps, True RS-232 EIA/TIA-232E output signal levels at data rates in Transceivers (MAX3246E Available in UCSP™ excess of 120kbps when loaded in accordance with the Package) EIA/TIA-232E specification. ♦ For Space-Constrained Applications: The 5µW shutdown mode of the MAX200, MAX205, MAX206, and MAX211 conserves energy in battery- MAX3228E/MAX3229E: ±15kV ESD-Protected, powered systems. The MAX213 has an active-low shut- +2.5V to +5.5V, RS-232 Transceivers in UCSP down and an active-high receiver enable control. Two ♦ For Low-Voltage or Data Cable Applications: receivers of the MAX213 are active, allowing ring indica- tor (RI) to be monitored easily using only 75µW power. MAX3380E/MAX3381E: +2.35V TO +5.5V, 1µA, 2Tx/2Rx RS-232 Transceivers with ±15kV ESD- The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink Protected I/O and Logic Pins small-outline (SSOP) package, which occupies only ♦ For Low-Power Applications: 40% of the area of the SO. The MAX207 is now avail- able in a 24-pin SO package and a 24-pin SSOP. The MAX3224E–MAX3227E/MAX3244E/MAX3245E: MAX203 and MAX205 use no external components, ±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to and are recommended for applications with limited +5.5V, RS-232 Transceivers with AutoShutdown circuit board space. Plus™ Applications Computers Ordering Information appears at end of data sheet Laptops, Palmtops, Notebooks Battery-Powered Equipment AutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc. Hand-Held Equipment Selector Guide No. of No. of No. of External Low-Power Part Power-Supply No. of RS- RS-232 Receivers Active Capacitors Shutdown/ Number Voltage (V) 232 Drivers Receivers in Shutdown (0.1µF) TTL Three-State MAX200 +5 5 0 0 4 Yes/No MAX201 +5 and +9.0 to +13.2 2 2 0 2 No/No MAX202 +5 2 2 0 4 No/No MAX203 +5 2 2 0 None No/No MAX204 +5 4 0 0 4 No/No MAX205 +5 5 5 0 None Yes/Yes MAX206 +5 4 3 0 4 Yes/Yes MAX207 +5 5 3 0 4 No/No MAX208 +5 4 4 0 4 No/No MAX209 +5 and +9.0 to +13.2 3 5 0 2 No/Yes MAX211 +5 4 5 0 4 Yes/Yes MAX213 +5 4 5 2 4 Yes/Yes ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. MAX200–MAX211/MAX213 +5V, RS-232 Transceivers with 0.1µF External Capacitors Ordering Information PART TEMP RANGE PIN-PACKAGE PART TEMP RANGE PIN-PACKAGE MAX200CPP 0°C to +70°C 20 Plastic Dip MAX206EWG -40°C to +85°C 24 Wide SO MAX200CWP 0°C to +70°C 20 Wide SO MAX206EAG -40°C to +85°C 24 SSOP MAX200EPP -40°C to +85°C 20 Plastic Dip MAX207CNG 0°C to +70°C 24 Narrow Plastic Dip MAX207CWG 0°C to +70°C 24 Wide SO MAX200EWP -40°C to +85°C 20 Wide SO MAX207CAG 0°C to +70°C 24 SSOP MAX201CPD 0°C to +70°C 14 Plastic Dip MAX201CWE 0°C to +70°C 16 Wide SO MAX207ENG -40°C to +85°C 24 Narrow Plastic Dip MAX201C/D 0°C to +70°C Dice* MAX207EWG -40°C to +85°C 24 Wide SO MAX201EPD -40ºC to +85°C 14 Plastic Dip MAX207EAG -40°C to +85°C 24 SSOP MAX201EWE -40ºC to +85°C 16 Wide SO MAX208CNG 0°C to +70°C 24 Narrow Plastic Dip MAX202CPE 0°C to +70°C 16 Plastic Dip MAX208CWG 0°C to +70°C 24 Wide SO MAX208CAG 0°C to +70°C 24 SSOP MAX202CSE 0°C to +70°C 16 Narrow SO MAX208C/D 0°C to +70°C Dice* MAX202CWE 0°C to +70°C 16 Wide SO MAX202C/D 0°C to +70°C Dice* MAX208ENG -40°C to +85°C 24 Narrow Plastic Dip MAX202EPE -40ºC to +85°C 16 Plastic Dip MAX208EWG -40°C to +85°C 24 Wide SO MAX202ESE -40ºC to +85°C 16 Narrow SO MAX208EAG -40°C to +85°C 24 SSOP MAX202EWE -40ºC to +85°C 16 Wide SO MAX209CNG 0°C to +70°C 24 Narrow Plastic Dip MAX203CPP 0°C to +70°C 20 Plastic Dip MAX209CWG 0°C to +70°C 24 Wide SO MAX209C/D 0°C to +70°C Dice* MAX203CWP 0°C to +70°C 20 Wide SO MAX203EPP -40°C to +85°C 20 Plastic Dip MAX209ENG -40°C to +85°C 24 Narrow Plastic Dip MAX203EWP -40°C to +85°C 20 Wide SO MAX209EWG -40°C to +85°C 24 Wide SO MAX204CPE 0°C to +70°C 16 Plastic Dip MAX211CWI 0°C to +70°C 28 Wide SO MAX204CWE 0°C to +70°C 16 Wide SO MAX211CAI 0°C to +70°C 28 SSOP MAX204C/D 0°C to +70°C Dice* MAX211C/D 0°C to +70°C Dice* MAX211EWI -40°C to +85°C 28 Wide SO MAX204EPE -40ºC to +85°C 16 Plastic Dip MAX211EAI -40°C to +85°C 28 SSOP MAX204EWE -40ºC to +85°C 16 Wide SO MAX205CPG 0°C to +70°C 24 Wide Plastic Dip MAX213CWI 0°C to +70°C 28 Wide SO MAX205EPG -40°C to +85°C 24 Wide Plastic Dip MAX213CAI 0°C to +70°C 28 SSOP MAX206CNG 0°C to +70°C 24 Narrow Plastic Dip MAX213C/D 0°C to +70°C Dice* MAX206CWG 0°C to +70°C 24 Wide SO MAX213EWI -40°C to +85°C 28 Wide SO MAX206CAG 0°C to +70°C 24 SSOP MAX213EAI -40°C to +85°C 28 SSOP MAX206ENG -40°C to +85°C 24 Narrow Plastic Dip *Contact factory for dice specifications. ______________________________________________________________________________________ 19 +5V, RS-232 Transceivers with 0.1µF External Capacitors Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 2 1 INCHES MILLIMETERS DIM MIN MAX MIN MAX INCHES MILLIMETERS A 0.068 0.078 1.73 1.99 MIN MAX MIN MAX N A1 D 0.239 0.249 6.07 6.33 14L 0.002 0.008 0.05 0.21 D 0.239 0.249 6.07 6.33 16L B 0.25 0.38 0.010 0.015 D 0.278 0.289 7.07 7.33 20L C 0.004 0.008 0.09 0.20 E H D 0.317 0.328 8.07 8.33 24L D SEE VARIATIONS D 0.397 0.407 10.07 10.33 28L E 0.205 0.212 5.20 5.38 e 0.0256 BSC 0.65 BSC H 0.301 0.311 7.65 7.90 L 0.025 0.037 0.63 0.95 0∞ 8∞ 0∞ 8∞ N A C B e L A1 D NOTES: 1. D&E DO NOT INCLUDE MOLD FLASH. 2. MOLD FLASH OR PROTRUSIONS NOT TO EXCEED .15 MM (.006"). PROPRIETARY INFORMATION 3. CONTROLLING DIMENSION: MILLIMETERS. TITLE: 4. MEETS JEDEC MO150. PACKAGE OUTLINE, SSOP, 5.3 MM APPROVAL DOCUMENT CONTROL NO. REV. 5. LEADS TO BE COPLANAR WITHIN 0.10 MM. 1 21-0056 C 1 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 20 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. MAX200–MAX211/MAX213 SSOP.EPS
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MAX206CNG have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods