Elite.Parts Manufacturers M MARCONI 431849300
About product Datasheet FAQ

MARCONI 431849300

Description

Fuse Panels, Fuse Holders and Fuses (must specify either 19 or 23" rack)

Part Number

431849300

Price

Request Quote

Manufacturer

MARCONI

Lead Time

Request Quote

Category

PRODUCTS - 4

Datasheet

pdf file

431849300.pdf

134 KiB

Extracted Text

DC Power Systems for Business-Critical Continuity Fuse Panels, Fuse Holders and Fuses 23" (58.42cm) Fuse Panels Description of Panels Part Number E/W Fuse Positions and Accessories Fuse Type Fuse Table Panel Height Notes Wrap & Solder Load Term 520987 (4) 0-5 A 70 A 1-3/4" (4.45cm) 2, 8 26-14 Ga Load Term* 431849300 (20-20) 0-10 A Split Load (20 A Max Per Side) Load & Grd. Rtn. Term Blocks GMT B 3/4" (1.91cm) 5 Wire Wrap Load Term 431622800 (50) 0-10 A (Accessory Grd. Bar 436105900) GMT B 3-1/2" (8.89cm) 5 1/4" (.64cm) Stud Load Term 431848900 (16) 0-60 A TPS C 7" (17.78cm) 3/4" (1.91cm) Stud (61-400 A), 7/8" (2.23cm) Stud (61-600 A) Load Term** 431407300 (1) 61-400 A TPL E 5-1/4" (13.34cm) 431407500 (1) 61-400 A E/W A 400 A Shunt TPL E 5-1/4" (13.34cm) 431605000 (2) 61-400 A TPL E 7" (17.78cm) 9 431605200 (2) 61-400 A E/W (2) 400 A Shunts TPL E 7" (17.78cm) 437417800 (2) 61-400 A A/F (2) Shunts & Ammeters TPL E 7" (17.78cm) 9, 10 431707900 (4) 61-400 A TPL E 10-1/2" (26.67cm) 431407400 (1) 61-600 A TPL E 5-1/4" (13.34cm) 431407600 (1) 61-600 A E/W A 600 A Shunt TPL E 5-1/4" (13.34cm) 9 431605100 (2) 61-600 A TPL E 7" (17.78cm) 431605300 (2) 61-600 A E/W (2) 600 A Shunt TPL E 7" (17.78cm) 437417900 (2) 61-600 A A/F (2) Shunts & Ammeters TPL E 7" (17.78cm) 9, 10 431707800 (4) 61-600 A TPL E 10-1/2" (26.67cm) 431401000 (1) 61-600 A Fuse Switch Unit TPL E 7" (17.78cm) 9 431430700 (2) 61-600 A Fuse Switch Unit TPL E 12-1/4" (31.12cm) 431432100 (1) 61-600 A Fuse Switch Unit A/F Ammeter and Shunt TPL E 7" (17.78cm) 9, 11 Lug Adpt. Load Term 431201100 (1) 800-1,200 A KRPC F 5-1/4" (13.34cm) 12, 13 426172900 (1) 800-1,200 A Fuse Switch Unit W/WO Shunt KRPC F 12-1/4" 12, 14 * Lugs not required ** See Table M 1 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses 19" (48.26cm) Fuse Panels Part Number Description Fuse Type Fuse Table Panel Height Notes Wrap & Solder Load Term 521090 (4) 0-5 A 70 A 1-3/4" (4.45cm) 2, 8 Wire Wrap Load Term 431653100 (40) 0-10 A (Accessory Grd. Bar 436105900) GMT B 3-1/2" (8.89cm) 5 431848800 (20-20) 0-10 A Split Load (Accessory Grd. Bar 436105900) GMT B 3-1/2" (8.89cm) 5 Term Block #6 Screw Load Term 431848300 (10-10) 0-10 A Split Load GMT B 1-3/4" (4.45cm) 5, 7 26-14 Ga Load Term* (20-20) 0-10 A Split Load (20 A Max Per Side) 431849300 Load & Grd. Rtn. Term Blocks GMT B 1-3/4" (4.45cm) 5 1/4" (.63cm) Stud Load Term 431849800 (12) 0-60 A TPS C 7" (17.78cm) Lug Adpt. Load Term 431406800 (1) 61-400 A TPL E 5-1/4" (13.34cm) 15 431408300 (1) 61-600 A TPL E 5-1/4" (13.34cm) 15 Front Rear Fuse Cabinet Assembly (Part Number 431849300) 2 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses Front Rear 61-600 amp Fuse Panel Front Rear 61-600 amp Fuse and Switch Distribution Panel 3 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses Front Side Rear Battery Load Alarm 0–5 amp Twin Fuse Block (70 Type) Front Side Alarm Battery Load 0–10 amp Fuse Block (GMT type) Front Side 61–600 amp Fuse Block (bolt-in type) Front Side TPS Fuseholders 4 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses A) 70 Type Fuse B) GMT Type Fuse C) TPS / TLS Type Table A: 70 Type Table C: TPS / TLS Type – 70 Type – – Designation Pins – amp Capacity Part Number amp Capacity Part Number Color Part Number TPS Type 0.18 248620100 Yellow 248628100 3 248230900 0.25 248620200 Violet 248628200 5 248231000 0.25* 248620300 Violet/White 248628300 6 248231200 0.5 248620500 Red 248628400 10 248231500 0.75 248620600 Brown 248628600 15 248231800 1.33 248620800 White 248628900 20 248232100 2 248621200 Orange 248629200 25 248232400 3 248621500 Blue 248629400 30 248232700 40 248233300 5 248621700 Green 248629700 50 248233900 60 248234200 70 248234500 Table B: GMT Type 80 118413 amp Capacity Part Number Color 90 118414 0.18 248610301 100 118415 0.25 248610200 Violet Bussmann GMT-A ALM Fuse for Use with TPS Holders 0.5 248610300 Red 0.75 248610500 Brown 0.18 248610301 1.33 248610700 White Safety Cover 248898700 2 248610800 Orange 3 248610900 Blue 4 248611100 Brown/White 5 248611000 Green 10 248611200 Red/White Dummy 248872600 Safety Cover 248898700 5 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses Table D: TPN Type amp Capacity Part Number 1 248230500 D) TPN Type D) TPN Type 1–30 amp 35–60 amp 3 248230800 6 248231100 10 248231400 15 248231700 20 248232000 25 248232300 30 248232600 35 248232900 40 248233200 45 248233500 50 248233800 60 248234100 Top Table E: TPL Type amp Capacity Part Number 70 248251500 80 248252000 End 100 248252600 150 248253300 F) KRP-C Type 200 248254000 225 248254500 Table F: KRP-C Type 250 248255000 E) TPL Type amp Capacity Part Number 300 248255700 800 248548200 400 248257000 1000 248549600 500 248258000 1200 248550100 600 248259000 6 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses Table G: Ammeters & Shunts Table H: Ammeters & Shunts amp Ammeter Shunt Part amp Ammeter Shunt Part Capacity Part Number Number Capacity Part Number Number 100 292486500 298274400 100 292486500 298274402 200 292487000 298274700 200 292487000 298274702 300 292487300 298274900 300 292487300 298274902 400 292487500 298275000 400 292487500 298275002 500 292487600 298275200 500 292487600 298275202 600 292487800 298275302 600 292487800 298275300 Table I: Shunts Table J: Bus Bars amp Capacity Shunt Part Number Number of Fuse Blocks Connected Part Number 800 298275400 2 341210700 1000 298275500 3 341211400 1200 298275600 4 341211900 5 341251200 6 341251400 7 341251000 8 341254100 Table K: Lugs and Adapters Description Part Number Adapter E/W (1) 2-4/0 saddle lug 483554500 (1) 0-500MCM saddle lug 245619900 (1) 600-1000MCM saddle lug 245619000 Adapter E/W (2) 1/0-500MCM saddle lugs 423554600 Adapter for crimp lugs 3/8" (.95cm) hardware (1" [2.54cm] C-C) or 1/2" (1.27cm) hardware (1-3/4" [4.45cm] C-C) 362755800 7 PDS-A-045 / November 2005 Fuse Panels, Fuse Holders and Fuses Application Notes 8. When a special arrangement is required, 14. Assembly is furnished with a lug adapter 1. Unless otherwise specified (Notes 2, 7 specify additional quantity of twin fuse A/F (3)sets of mounting holes 3/8" & 12), an alarm LED card part number block(s), part number 248840300 and (.95cm) HDW 1" (2.54cm) C-C. When 486331800, for use with power board busbar(s) required per Table J. a shunt is required, order assembly equipment with a fuse alarm circuit, is equipped with a shunt mounting block furnished as standard. When no power part number 381413300 and shunt board alarm circuit is available and an 9. Unless otherwise specified, output lugs from Table I as required. alarm LED and relay is required, specify and lug adapters are not provided, order panel e/w optional alarm LED and relay from Table K and lug tables in this cata- card part number 486331600. Specify log per job requirements. 15. Assembly is furnished with (2) lug voltage and polarity. adapters A/F (2) sets of mounting holes 3/8" (.95cm) HDW 1" (2.54cm) C-C and 10. Ammeters and shunts are not furnished (1) set of mounting holes 1/2" (1.27cm) 2. This assembly is equipped with an with assembly and must be ordered HDW 1-3/4" (4.45cm) C-C. alarm LED and relay card part number from Table J per job requirements. 486331600. If not required, it may be replaced with a 486331800 alarm LED 11. Ammeters and shunts are not furnished card. Specify voltage and polarity. with assembly and must be ordered How To Order from Table I per job requirements. 3. These fuse panel assemblies can be 1. Specify part number for 19" (48.26cm) used for ±12, 24, 48 OR 130 volt appli- 12. This assembly is equipped with a fuse or 23" (58.42cm) fuse panel assembly as cations unless otherwise specified alarm resistor tapped for 250, 500 or required. (Note 5). 2,500 ohms for connection to a fuse alarm relay circuit. 2. Specify part number and quantities of 4. Apparatus mounting blanks are pro- fuses, shunts, lug adapters and other vided for all unequipped positions. 13. Lug adapters are not part of this accessories from associated tables and assembly, order (1) or (2) part num- application notes as required. 5. To be used up to 60 Volt DC only. ber 363221900 lug adapter (A/F 3/8" (.95cm) HDW 1" [2.54cm] C-C or 1/2" 3. S pecify quantity and part number of [1.27cm] HDW 1-3/4" [4.45cm] C-C 6. Contact Emerson Network Power for lugs and adapters required (see Table K ). Order (1) part number 63556800 additional information concerning any or the Ground Bars, Terminal Panels & busbar for fuse to discharge bus when specific fuse panel. Specify part number Lugs data sheet from Accessories). required. and request assembly drawing. 7. This assembly has an alarm relay and lamp arranged for ± 24 or 48 volt only. Specify voltage and polarity. Emerson Network Power. • AC Power • Embedded Power • Integrated Cabinet Solutions The global leader in enabling business- • Connectivity • Inbound Power • Precision Cooling critical continuity. • DC Power • Outside Plant • Site Monitoring and Services © 2005 Emerson Network Power Energy Systems, This publication is issued to provide outline information only which (unless agreed by Emerson Network Power Energy Systems, North North America, Inc. All rights reserved. America, Inc. in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Emerson Network Power Energy Systems 1122 F St. Lorain, OH 44052 Emerson Network Power Energy Systems, North America, Inc. reserves the right to alter without notice the specification, design or Toll Free: 800-800-1280 (USA and Canada) conditions of supply of any product or service. Telephone: 440-246-6999 Fax: 440-246-4876 The Emerson logo is a trademark and a service mark of Emerson Web: EmersonNetworkPower.com/EnergySystems Electric Co. Emerson Network Power is a division of Emerson ® ® Electric Co. Vortex , Candeo™ and LORAIN are trademarks of Emerson Network Power Energy Systems, North America, Inc. Printed in USA 8 PDS-A-045 / November 2005

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the 431849300 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

SA-400 Secure Hard Drive

SA-400: Security Appliance Chassis with dual power

SA-400 single hot-swappable spare power supply

product

Marconi 42GESBAASLE22JAZ7 Enclosures - 200 Amp, 120/240 AC, 1 Phase, 42 KAIC @ 240 VAC; Distribution...

product

Marconi 486529901 Rectifiers - 48V/50 AMP Rectifier for Vorte

product

MARCONI 486531001 48V/200 AMP 480AC INPUT RECTIF