The MS-PAE 120/240V Series Inverter/Charger The MS-PAE 120/240V Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PAE Series is powerful, easy-to-use, and best of all, cost effective. No series stacking required: The unique design of the MS- PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 volts. Parallel stacking: You can parallel up to four inverter/chargers for up to 17.6kw of power at 120/240V. The MP panels and router are required for parallel stacking the MS-PAE Series. MODEL NUMBERS Power Factor Corrected (PFC) Charger: Our PFC charger is  MS4024PAE built into all of our inverter chargers. It uses less energy from  MS4448PAE a generator than a standard charger – using 25-30% less AC current than standard chargers. AVAILABLE FOR Safe and reliable: The MS-PAE Series is ETL Listed to st  Renewable the stringent requirements of UL 1741, 1 edition, and Energy Systems CSA C22.2 #107.1-01 for renewable energy installations. Off-grid Power Features Back-up Power Pure sine wave: Power Multiple ports: The MS-PAE your T.V.s, stereos, plasma Series provides multiple AVAILABLE ACCESSORIES screens, and other sensitive ports, including an RS485  Auto Generator Start - electronics without worry. communication port for ME-AGS-N The pure sine wave inverter network expansion, and a  Battery Monitor Kit and power factor corrected remote port.  Conduit Box charger provide clean, reliable Accessible design: The extra  Fuse Blocks inverter power with low total large AC access cover with harmonic distortion (THD) of  Remote - ME-RC50 terminal screw block and 360° less than 5%.  Remote - ME-ARC50 DC connection terminals with  Router - ME-RTR Choices: The MS-PAE Series covers make this inverter more  MP and MMP Panels comes in 24 and 48 volt accessible when it needs to be. configurations, allowing you Convenient switches: The MS- to choose the model that PAE Series comes with an on/off is right for you. inverter-mounted switch with Versatile mounting: an easy-to-read LED indicator. Mount the MS-PAE Series Buy with ease: The MS-PAE on a shelf or wall. Series is backed by a two-year Lightweight: The lightweight (24-month) limited warranty. aluminum base and cover also provides noise reduction and corrosion resistance. The Powerful Difference MS-PAE 120/240V Series Specifications MS4024PAE MS4448PAE Inverter Specifications Input battery voltage range 18.0 - 34.0 VDC 36.0 - 68.0 VDC Nominal AC output voltage 120/240 VAC split phase (± 5%) 120/240 VAC split phase (± 5%) Output frequency and accuracy 60 Hz ± 0.1 Hz 60 Hz ± 0.1 Hz Total Harmonic Distortion (THD) < 5% < 5% 1 msec surge current (amps AC) Line-Neutral: 120, Line-Line: 70 Line-Neutral: 120, Line-Line: 70 100 msec surge current (amps AC) Line-Neutral: 72, Line-Line: 40 Line-Neutral: 75, Line-Line: 40 5 sec surge power (real watts) 5800 8500 30 sec surge power (real watts) 5200 6000 5 min surge power (real watts) 4800 5400 30 min surge power (real watts) 4500 4800 Continuous power output at 25° C 4000 VA (L-L) 4400 VA (L-L) Maximum continuous input current 266 A 144 A Inverter efficiency (peak) 93% 94% Transfer time 16 msecs 16 msecs Search mode (typical) < 6 watts < 6 watts No load (120 VAC output, typical) 27 watts 25 watts Waveform Pure Sine Wave Pure Sine Wave Charger Specifications Continuous output at 25° C 105 ADC 60 ADC Charger efficiency 85% 85% Power factor > 0.95 > 0.95 15 AAC per leg 17.5 AAC per leg Input current at rated output (AC amps) at 120/240 VAC split phase at 120/240 VAC split phase General Features and Capabilities Transfer relay capability 2 legs at 30A per leg transfer standard on all models Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™ Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans Overcurrent protection Yes, with two overlapping circuits Overtemperature protection Yes on transformer, MOSFETS, and battery Conformal coating on PCB’s for corrosion protection Yes Powder coated chassis & top for corrosion protection Yes Stainless steel fasteners for corrosion protection Yes st Listings ETL Listed to ANSI / UL1741, 1 edition, and CSA STD C22.2 No.107.1-01 Warranty Two years parts and labor Environmental Specifications Operating temperature -20° C to +60° C (-4° F to 140° F) Nonoperating temperature -40° C to +70° C (-40° F to 158° F) Operating humidity 0 to 95% RH non condensing Physical Specifications Dimensions (l x w x h) 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) Mounting Shelf, wall (no vents on bottom), MP or MMP panels Unit Weight 55 lb (24.9 kg) 55 lb (24.9 kg) Shipping Weight 60 lb (27.2 kg) 60 lb (27.2 kg) Max operating altitude 15,000’ (4570 m) Phone: 425-353-8833 Magnum Energy, Inc. Fax: 425-353-8390 2211 West Casino Road Web: www.magnumenergy.com Authorized Magnum Dealer Everett, Washington 98204 USA Testing for specifications at 25° C Specifications subject to change without notice. The Powerful Difference June 2010, Rev A Part #64-0275