CompactPCI Power Supplies Power Electronics Group CompactPCI 350W 6U Models – Ac or Dc Input PCI-3/3P are truly state of the art CompactPCI power supplies. The versatile 6U/350 W models are PICMG-compliant and feature the Positronic 47-connector, and are available in both Ac and Dc input models. In addition, they are available with dual DIN-M 24+8 connectors or Positronic 38-pin connector depending on your specific requirement. The robust design features a 250,000 hour calculated MTBF with full power available from 0 to 50° Centigrade. System intelligence is produced by supervisory, control and protective circuitry. This robust and configurable design provides system intelligence coupled with robotic SMT manufacturing. All this is available in an integrated, cost-effective package. Key Features: o Hot Swap N + 1 redundancy o Internal ORing diodes o 75% efficiency o 48 Vdc or PFC Ac input o Quad outputs o Single-wire current sharing o Eurocard 6U double slot width format o 350 W continuous output at 50 °C o No minimum load required Model Summary and Ordering Information Model Number Input Dimensions Connector V1 V2 V3 V4 1 1 2 PCI-3P-4CBDD Ac 6U x 2 Slots Positronic 5 V 30 A 3.3 V 45 A 12 V 12 A -12 V 3 A (8 HP) 47-pin 1 1 2 PDI-3P-4CBDD Dc 6U x 2 Slots Positronic 5 V 30 A 3.3 V 45 A 12 V 12 A -12 V 3 A (8 HP) 47-pin 1 1 2 PCI-3-4BCDD-P1 Ac 6U x 2 Slots Positronic 3.3 V 45 A 5 V 30 A 12 V 12 A -12 V 3 A (8 HP) 38-pin 1 1 2 PDI-3-4BCDD-P1 Dc 6U x 2 Slots Positronic 3.3 V 45 A 5 V 30 A 12 V 12 A -12 V 3 A (8 HP) 38-pin 1 1 2 PCI-3-4BCDD Ac 6U x 2 Slots DIN-M 3.3 V 45 A 5 V 30 A 12 V 12 A -12 V 3 A (8 HP) 24+8 1 1 2 PDI-3-4BCDD Dc 6U x 2 Slots DIN-M 3.3 V 45 A 5 V 30 A 12 V 12 A -12 V 3 A (8 HP) 24+8 Note: 1. 200W maximum combined output power for V1 and V2. 2. V3 delivers 15 A peak current for 30 seconds. For Mechanical Outline and Connector Pin configurations for Positronic 38-pin or Dual DIN models contact factory. For other voltage requirements, please contact factory. Specifications_______________________________________________________________________________ Input Specifications Input Specifications (continued) Ac Input Voltage: 90 to 264 Vac, 47 to 63 Hz Input Protection: Dc Input Voltage: 40 to 72 Vdc Ac Internal Fuse 10A Power Factor: 0.99 at full-load and nominal line Dc Internal Fuse 20A Inrush Current: Ac Input Cold Start 40 Apk Output Specifications Ac Input Hot Start 100 Apk, for one-half cycle Output Power: 350 W maximum Dc Input Cold 30 Apk Output Voltage & Current Ratings: Dc Input Hot 100 Apk Output Vdc factory preset to +/-0.2% of nominal See output power ratings table CompactPCI3P 01.07.03 Specifications_____________________________________________________________________________ Output Specifications (continued) Signals and Controls (continued) Current Share: Single wire connection: V1, V2 and V3 Inhibit/Enable*: Inhibit signal normally high or open; drive low to disable. Enable signal normally high, drive low to enable. Accuracy ± 10% maximum @ full load. Overshoot/Undershoot: ID Pin: Ground pin that can be used, by the system, to detect the presence of the power supply Less than 1.0% at turn-off or turn-off *All interface signals are TTL compatible Less than 3.0% for 50-100% step load change Start-Up Time: Less than 4 seconds Safety & Environmental Efficiency: Temperature Range: 110 Vac input: 70% typical measurement at full-load Operating: 0 to 50 °C 220 Vac input: 75% typical measurement at full-load Storage: -40°C to +85 °C 48 Vdc input: 71% typical measurement at full-load Operating Humidity: Maximum 95% RH non-condensating Hold-up Time: Ac input–17 ms minimum at full-load and Altitude: low line Operating: 10,000 feet Regulation: Non-operating: 40,000 feet Load: 0.5% with remote sense, 1% without Line: 0.1% over entire operating range Temperature Coefficient: 0.02% per °C within rated load Cooling: 400 linear-feet-per-minute through the power supply Minimum Load: No minimum load required Safety Agency Compliance: UL, cUL & TUV, CE Overcurrent Protection: All outputs sets to 110-135% of full rated load with automatic recovery EMI: Per VDE/CISPR22, FCC Part 15, Class A Immunity: Meets EN61000 sections 3-2, 3-3, 4-2, 4-3, 4-4, 4-5, Overtemperature Protection: Automatic shutdown with auto recovery 4-6, and 4-11 Shock and Vibration: Meets IEC68 Remote Sense: Compensates for voltage drop of up to 0.5 V Dielectric Withstand: to the load (V1 and V2). Open/reverse sense load protection. Overvoltage Protection: All outputs set at 125% of nominal. Input-to-ground: Ac input, 2200 Vdc; Dc input, 1500 Vdc Input-to-output: Ac input, 4300VDC; Dc input, 2850 Vdc Reset by cycling input power, inhibit, or enable. Output-to-case: 50 Vdc Output Noise and Ripple: PARD: 1% or 100 mV p-p, whichever is greater Ac leakage Current: 1.2 ma maximum at 240 Vac, 50 Hz Mechanical Specifications Signals and Controls Weight: 4.5 pounds LED Indicator: Front panel bicolor LED indicates status; amber, Size: 6U x 160 mm x 8HP (233 mm H x 160 D mm x 40 mm W) fault; green, power supply good Supply Fail Signal*: Signal goes low after Ac input failure and Rack Seating: Injector/extractor handle for insertion/removal 10 ms before any output goes out of regulation; Dc output MTBF: 250,000 hours calculated at 25 °C, Bellcore Standard failure Warranty: Two years from date of shipment, standard product Output Power Derating Signal*: Signal low when power supply only temperature is out of specified upper limit Specifications are subject to change without prior notice. PCI-3P POSITRONIC P47 KEY_____________________________________________________________ Pin SIGNAL NAME Pin SIGNAL NAME NO. NO. 1 V1 Output (5V) 24 V4 Return 2 V1 Output (5V) 25 Geographic Address Bit 0 3 V1 Output (5V) 26 Reserved 4 V1 Output (5V) 27 Enable 5 V1 and V2 Return 28 Geographic Address Bit 1 6 V1 and V2 Return 29 V1 Adjust 7 V1 and V2 Return 30 V1 Remote Sense 8 V1 and V2 Return 31 Geographic Address Bit 2 9 V1 and V2 Return 32 V2 Adjust 10 V1 and V2 Return 33 V2 Remote Sense 11 V1 and V2 Return 34 Sense Return 12 V1 and V2 Return 35 V1 Current Share 13 V2 Output (3.3V) 36 V3 Remote Sense (NC) 14 V2 Output (3.3V) 37 Reserved for Mgmt. Bus 15 V2 Output (3.3V) 38 Degrade Signal 16 V2 Output (3.3V) 39 Inhibit 17 V2 Output (3.3V) 40 Reserved for Mgmt. Bus 18 V2 Output (3.3V) 41 V2 Current Share 19 V3 Return 42 Fail Signal 20 V3 Output (12V) 43 Reserved for Mgmt. Bus 21 V4 Output (-12V) 44 V3 Current Share 22 Signal Return 45 Chassis Ground (safety ground) 23 Reserved 46 Ac Input – Neutral; +Dc Input 47 Ac Input – line; -Dc Input _________________________________________________________________________________________ Outline Drawings and Dimensions ___________________________________________________________ PCI/PDI-3P OUTLINE DRAWING SHOWN Contact factory for drawings of other models ____________________________________________________________________www.magnetekpower.com North America Europe Magnetek, Inc. Magnetek S.p.A 8966 Mason Avenue, Chatsworth, California Via San Giorgio 642 (818) 727-2216 / (800) 621-0733 / Fax (818) 727-2276 52028 Terranuova Bracciolini, Italy (+39) 055.9195.1 / Fax (+39) 055.9195.248 / (+39) 055.9198.185