Direct solenoid and solenoid pilot operated valves Series 45 Individual mounting sub-base inline non”plug-in” Manifold mounting sub-base with sub-base with sub-base pressure stacking pressure non”plug-in” regulators and regulators flow controls Manual operator Armature Epoxy encapsulated solenoid Push pin Spring biased moveable pole piece Bonded balanced poppets Spring return SERIES FEATURES • Single and double solenoid or remote air. ® • The patented MACSOLENOID for fastest possible response times. • Bonded balanced poppets for high flow, precise repeatability, and consistent operation. • Balanced poppet design permits versatility in pipping. Valves can be piped as 4-way, 3-way or 2-way, normally closed or normally open or can be used for vacuum, diverter or selector applications. • Use on lube or non-lube service. • Extremely high cycle rates. • Extremely long service life due to unique poppet cushions. • Manual overrides as standard. • Various solenoid enclosures and plug-in connectors • Optional surge suppression available. • Low wattage DC solenoids — down to 1.8 watts. ® • Patented MACSOLENOID — virtually burn-out proof on AC service. Consult “Precautions” before use, installation or service of MAC Valves. B A IN EXH. WARRANTY 10 100 0% % OF PRODUCTION TESTED 18 18 10 100 0% % MONTHS Series 45 VALVE CONFIGURATIONS AVAILABLE • 2-position single and double solenoid or remote air. • Single pressure (4 or 5 ports) • Individual, stacking and manifold base mounted models. • Integral individual exhaust flow controls with common exhaust port. • Integral regulators and flow controls on manifolds. SPECIAL APPLICATIONS : The balanced poppet design facilities using the same valve for many functions and can be used for pressure, vacuum or plugged without the necessity of changing any parts. Pipping suggestions are shown in the chart below. BA B-PLUGGED A B A-PLUGGED X X IN EXH IN EXH IN EXH 4-WAY 3-WAY 3-WAY NORMALLY CLOSED NORMALLY OPEN B-PLUGGED A B A-PLUGGED BA X X XX X IN EXH-PLUGGED IN EXH-PLUGGED IN EXH-PLUGGED 2-WAY 2-WAY DIVERTER NORMALLY CLOSED NORMALLY OPEN B A-PLUGGED Operator De-Energized X Operator Energized IN EXH PRESS PRESS OR OR VAC VAC SELECTOR "A" CAN BE USED AS SELECTOR PORT OUTLET IF DESIRED Consult “Precautions” before use, installation or service of MAC Valves. Direct solenoid and solenoid pilot operated valves Series 45 Function Port size Flow (Max) Individual mounting 4/2 #10-32 - 1/8” 0.15 C inline v OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. Burn-out proof solenoid on AC service. HOW TO ORDER Port size Single operator Double operator (Minimum DC wattage 5.4W) AB AB AB AB EXH IN EXH IN 1/8” NPTF 45A-AA1-DXXX-XXX 45A-GA1-DXXX-XXX # 10-32 UNF 45A-AB1-DXXX-XXX 45A-GB1-DXXX-XXX WITH INTEGRATED FLOW CONTROLS Port size Single operator Double operator (Minimum DC wattage 5.4W) AB AB AB AB EXH IN EXH IN 1/8” NPTF 45A-AA2-DXXX-XXX 45A-GA2-DXXX-XXX # 10-32 UNF 45A-AB2-DXXX-XXX 45A-GB2-DXXX-XXX SOLENOID OPERATOR➤D XX X- X XX Voltage Wire length Manual operator Electrical connection XX X X XX AA 120/60, 110/50 A 18” (Flying leads) 1 Non-locking KA Square connector AB 240/60, 220/50 J Connector 2 Locking KD Square connector with light AC 24/60, 24/50 JB Rectangular connector FB 24 VDC (1.8 W) JD Rectangular connector with light DA 24 VDC (5.4 W) BA Flying leads DF 24 VDC (12.7 W) BOTTOM PORT OPTIONS (O’RING MOUNT) 45A-XXX-D XXX-XXX D-Sgl. oper. - All ports F-Sgl. oper. - “A” & “B” ports H-Dbl. oper. - All ports J-Dbl. oper. - “A” & “B” ports Consult “Precautions” before use, installation or service of MAC Valves. WARRANTY 10 100 0% % OF PRODUCTION TESTED 18 18 10 100 0% % MONTHS Series 45 TECHNICAL DATA Fluid : Compressed air, vacuum, inert gases Pressure range : Vacuum to 120 PSI Lubrication : Not required, if used select a medium aniline point lubricant (between 180°F and 210°F) Filtration : 40 µ Temperature range : 0°F to 120°F (-18°C to 50°C) Flow (at 6 bar, ΔP=1bar) : 1.8 W : (0.1 C ), 5.4 W : (0.15 C ) v v 3 Leak rate : 50 cm /min Coil : General purpose class A, continuous duty, encapsulated Voltage range : -15% to +10% of nominal voltage Protection : Consult factory Power : ∼ Inrush : 10.9 VA Holding : 7.7 VA = 1.8 to 12.7 W Response times : 24 VDC (5.4 W) Energize : 6 ms De-energize : 2 ms 120/60 Energize : 3-8 ms De-energize : 2-7 ms Spare parts : • Solenoid operator (power ≥ 5.4 W) : DXXX-XXX, including mounting screws 35013. • Seal (between solenoid and valve body) : 16402. • Valve cover plate with flow controls : N-45002. Options : • BSPP threads. • High flow up to 0.23 C , according to wattage and high flow Mod. • NAMUR interface - 45A-FA1DXXX-XXX and v required NAMUR adapter kit: N-45028-03 (for 3-way operation) - N-45028-04 (for 4-way operation). DIMENSIONS Dimensions shown are metric (mm) 62,0 F G 33,5 A B H E IN EX 27,5 24,5 22,5 D A C 32,5 18,0 B 16,0 10,0 3,5 9,0 15,0 30,0 23,5 6,5 Port size A B C D E F G H 9,5 Ş 3,4 13,8 1/8” NPTF 7.5 16.0 10.0 9.5 7.5 11.5 14.5 9.5 14,5 # 10-32 UNF 9.75 14.0 10.5 9.75 9.75 13.0 11.0 9.75 Consult “Precautions” before use, installation or service of MAC Valves. IN B A EX