DIRECTIONAL CONTROL VALVES 2 IN-Stock Directional Control Valves Table of Contents ™ MAC Small 3 Way Valves. . . . . . . . . . . . . . . . . . . . .2-2 MAConnect Specifications & Wiring Diagrams . 2-36 34 Series, Cv up to .12 . . . . . . . . . . . . . . . . . . . .2-2 Murrelectronik Cube67 . . . . . . . . . . . . . . . . . . .2-37 35 Series, Cv up to .17 . . . . . . . . . . . . . . . . . . . .2-5 93 Series, Cv up to 3.8 . . . . . . . . . . . . . . . . . . .2-38 36 Series, Cv up to .3. . . . . . . . . . . . . . . . . . . . .2-8 ™ 93 Series MAConnect , Cv up to 3.8 . . . . . . .2-40 MAC Large 3 Way Valves . . . . . . . . . . . . . . . . . . . .2-9 ™ 92/93 Series MAConnect Transition Plate . . . 2-41 52 Series, Cv up to 1.5 . . . . . . . . . . . . . . . . . . . .2-9 MAC Remote Air Piloted Valves . . . . . . . . . . . . . . . .2-42 55 Series, Cv up to 2.5 . . . . . . . . . . . . . . . . . . . 2-11 MAC Plug-In Connectors and Molded Cord Sets . . . .2-44 56 Series, Cv up to 5.4 . . . . . . . . . . . . . . . . . . . 2-13 Skinner/Parker 7000 Series Valves . . . . . . . . . . . . .2-46 MAC Small 4 Way Valves. . . . . . . . . . . . . . . . . . . . 2-14 2 Way Solenoid . . . . . . . . . . . . . . . . . . . . . . . .2-46 44 Series, Cv up to .11 . . . . . . . . . . . . . . . . . . . 2-14 Direct, Cv up to .31 and Pilot, Cv up to 2.5 . . . .2-46 45 Series, Cv up to .18 . . . . . . . . . . . . . . . . . . . 2-17 3 Way Solenoid – Direct, Cv up to .32 . . . . . . .2-47 46 Series, Cv up to .3 . . . . . . . . . . . . . . . . . . . 2-21 MAC Manual 4 Way Valves, Cv up to 1.1 . . . . . . . .2-48 ™ 46 Series MAConnect , Cv up to .3 . . . . . . . .2-24 Bimba Disc Air Valves – 3 & 4 Way . . . . . . . . . . . .2-49 42 Series, Cv up to .35 . . . . . . . . . . . . . . . . . . . 2-25 Pneumadyne Manual 4 Way Valves . . . . . . . . . . . .2-49 ™ 42 Series MAConnect , Cv up to .35 . . . . . . . 2-27 Pneumadyne Miniature Pneumatic Valves . . . . . . . . .2-50 48 Series, Cv up to 1.0 . . . . . . . . . . . . . . . . . . . 2-28 SunX DP-100 Electronic Pressure Gauge . . . . . . . . . . 2-51 ™ 48 Series MAConnect , Cv up to 1.0 . . . . . . . 2-29 Pneumadyne Micro Gauge . . . . . . . . . . . . . . . . . . . 2-51 400 Series, Cv up to 1.0 . . . . . . . . . . . . . . . . . .2-30 MAC Guide to Ordering Valves . . . . . . . . . . . . . . . 2-51 MAC Large 4 Way Valves . . . . . . . . . . . . . . . . . . .2-32 MAC Precautions Concerning Application, 92 Series, Cv up to 1.2 . . . . . . . . . . . . . . . . . . .2-32 ™ 92 Series MAConnect , Cv up to 1.2 . . . . . . .2-34 Installation and Service . . . . . . . . . . . . . . . . . . . . . .2-52 Action Automation & Controls, Inc. Contact Action Automation for CAD Drawings 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com   DIRECTIONAL CONTROL VALVES Small 3-Way IN-Stock MAC Valves 34 Series 10mm 2 & 3 Way Direct Operated Universal Inline Solenoid Valves The MAC 34 series is a high flow, direct operated 10mm poppet valve. It uses a small poppet with high shifting force and no minimum operating pressures. The MAC 2 short stroke, direct operated, balanced poppet provides consistent operation. The shifting forces are consistently high, regardless of inlet pressure fluctuations. The balanced, high shifting forces provide Valve suitable for use as an inline valve very fast and repeatable response times. or with EBM style manifolds on page 2-3 Note: Dimensions are in mm, to convert to inches divide by 25.4 Images shown may not represent all part numbers listed. Model Number Cv Port Electrical Connector 34C-AAA-GDCA-1KV .06 # 10-32 24 VDC, 1.8 W 18" Leads, Plug-in Diode & LED 34C-AAA-GDFA-1KV .12 # 10-32 24 VDC, 4.0 W 18" Leads, Plug-in Diode & LED Operating Data Pressure Rating: Vacuum to 120 PSI Fluids: Air or inert gases. Lubrication: Not required, but if used, a medium aniline point oil (180°F to 210°F) is recommended. Ambient Temperature Range: 0°F to 120°F ( –18°C to 50°C). Flow Rating: See above. Electrical: General purpose class A, continuous duty, encapsulated. Coil leads #22AWG. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-2 2 1 3 DIRECTIONAL CONTROL VALVES Small 3-Way IN-Stock MAC Valves 34 Series Circuit Bar Manifolds with 10.5 mm Spacing for Inline Valves Please See Page 2-2 for IN-Stock Valve Selection 2 Dim. A B C D E F G 1/8" NPTF 1 6.0 47 .5 57 .4 8.0 23.0 31 .0 8.0 Note: Dimensions are in mm, to convert to inches divide by 25.4 Circuit Bar Manifolds for 34 Inline Series Valves Images shown may not represent all part numbers listed. Model Number Profile # of Stations Por t Size (Inlet & Exhaust) EBM34B - 002A - 02 High, 16mm 2 1/8" NPT EBM34B - 002A - 04 High, 16mm 4 1/8" NPT EBM34B - 002A - 06 High, 16mm 6 1/8" NPT 30456 - A Blank Station Plate 1 – 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-3 DIRECTIONAL CONTROL VALVES Small 3-Way IN-Stock MAC Valves 34 Series Circuit Bar Manifold with 10.5 mm Spacing for Base Mounted Valves with 25 Pin SUB-D Connector 2 Note: Dimensions are in mm, to convert to inches divide by 25.4 Note: Manifolds Stocked with Positive Common, Negative Common available upon request. 34 Series Plug-in Style Valves Images shown may not represent all part numbers listed. Model Number Cv Electrical Connector 34B - L00 - GDC0 - 1DV .06 24 VDC, 1.8 W No Lead Wire, Plug In, Diode & LED 34B - L00 - GDF0 - 1DV .11 24 VDC, 4.0 W No Lead Wire, Plug In, Diode & LED 34 Series Circuit Bar Manifolds with 25 Pin SUB-D Connector Images shown may not represent all part numbers listed. Model Number No. of Stations Port Size ECF34B - 00ABA - LC04 4 #10-32 UNF ECF34B - 00ABA - LC06 6 #10-32 UNF ECF34B - 00ABA - LC08 8 #10-32 UNF ECF34B - 00ABA - LC12 12 #10-32 UNF M - 34005 Blank Cover Plate – 24180 Wire Connector Protector – VT - D 25 25 PIN 10ft. SUB D Connector Cable 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-4 DIRECTIONAL CONTROL VALVES Small 3-Way IN-Stock MAC Valves 35 Series Individual Inline Direct Solenoid Valves “BA” OPTION “KJ” OPTION 2 Dim. A B C CA .49 .51 1.97 (1 2.4) (1 3.0) (50.0) Conduit Connector DIN Connector shown shown for “BA” Option for “KJ” Option 2 2 3 3 1 1 N.C. N.O. 120/60, 110/50 VAC Inline Valves with 1/8" NPT Ports Images shown may not represent all part numbers listed. Model Number Cv Connector 35A-AAA-DAAA-1BA .17 18" leads with grommet 35A-AAA-DAAJ-1KJ .17 9.4 mm DIN Connector, male only* 24 VDC 5.4 Watt Inline Valves with 1/8" NPT Ports Images shown may not represent all part numbers listed. Model Number Cv Connector 35A-AAA-DDAA-1BA .15 18" leads with grommet 35A-AAA-DDAJ-1KJ .15 9.4 mm DIN Connector, male only* 24 VDC 1.8 Watt Inline Valve with 1/8" NPT Ports Images shown may not represent all part numbers listed. Model Number Cv Connector 35A-AAA-DFBA-1BA .08 18" leads with grommet 35A-AAA-DFBJ-1KJ .08 9.4 mm DIN Connector, male only* Accessory for 35 Series Inline Valves with “BA” Option Images shown may not represent all part numbers listed. Model Number Description E-45056 Metal Bolt-On Conduit *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-5 DIRECTIONAL CONTROL VALVES Add-A-Unit Small 3-Way IN-Stock MAC Valves Manifold with “KJ” 35 Series Valves for Manifold Mounting Option 120/60, 110/50 VAC Manifold Valves No Base Images shown may not represent all part numbers listed. Model Number Cv Connector 35A-B00-DAAA-1BA .17 18" leads 35A-B00-DAAJ-1KJ .17 9.4 mm DIN Connector, male only* 24 VDC 5.4 Watt Manifold Valves No Base Images shown may not represent all part numbers listed. 2 Model Number Cv Connector Manifold valve with “BA” Option 35A-B00-DDAA-1BA .15 18" leads 35A-B00-DDAJ-1KJ .15 9.4 mm DIN Connector, male only* 24 VDC 1.8 Watt Manifold Valves No Base Images shown may not represent all part numbers listed. Model Number Cv Connector 35A-B00-DFBA-1BA .08 18" leads 35A-B00-DFBJ-1KJ .08 9.4 mm DIN Connector, male only* 35 Series Fixed Length Manifolds Fixed Length Manifolds with Side Outlet Ports, see page 2-7 for dimension detail Images shown may not represent all part numbers listed. Model Number No. of Stations Ports EBM35A-001A-02 2 1/8" NPT EBM35A-001A-04 4 1/8" NPT EBM35A-001A-06 6 1/8" NPT M-35004 Blank Station Plate - Add-A-Unit Manifolds Components, see page 2-7 for dimension detail Images shown may not represent all part numbers listed. Model Number Ports Description 35A-0AE 1/8" NPT Normally Closed Manifold Base 35A-0AF 1/8" NPT Normally Open Manifold Base 35A-0AJ 1/8" NPT N.C. Manifold Base with Regulator/Adj. Knob M-35003-01 1 /4" NPT End Plate Kit (1 required per assembly) N-35006 - Isolator, Inlet and Exhaust N-35007 - Isolator, Inlet Only N-35008 - Isolator, Exhaust Only PMG-160 - 15mm Gauge 0-150 PSI (N-35005 necessary for mounting) N-35005 - Gauge Adaptor *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-6 DIRECTIONAL CONTROL VALVES Small 3-Way IN-Stock MAC Valves 35 Series Valves for Manifold Mounting EBM Manifold 2 Add-A-MAnifold The overall length of a bar, when all stations are identical, is one less than the number of stations times the center distances selected, plus 42 mm (to provide common inlet, exhaust and mounting holes.) fixed length MAnifolds 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-7 2 DIRECTIONAL CONTROL VALVES 36 Series Direct Operating Inline Valves 3-Way Inline Valves 120/60, 110/50 VAC with 1/8" NPT Ports 41.7 Model Number Cv Connector MAC-36A-AAA-JAAA-1GGG 0.3 18" Mac Jac leads with ground wire, no light MAC-36A-AAA-JAA0-1KR 0.3 9.4 mm DIN Connector, male only*, no light 58.2 Images shown may not represent all part numbers listed. 3 3.40 3-Way Inline Valves 24 VDC, 5.4 watt with 1/8" NPT Ports 3.25 2 GGG/GA 4.75 26.25 Option Model Number Cv Connector 30.50 MAC-36A-AAA-JDAA-1GA 0.3 18" Mac Jac leads without light or diode MAC-36A-AAA-JDA0-1KJ 0.3 9.4 mm DIN Connector, male only*, no light 23.25 Images shown may not represent all part numbers listed. 3-Way Inline Valves 24 VDC, 1.8 watt with 1/8" NPT Ports 36 Series Inline Valve Model Number Cv Connector MAC-36A-AAA-JDEA-1GA 0.15 18" Mac Jac leads without light or diode KJ/KR Option MAC-36A-AAA-JDE0-1KJ 0.15 9.4 mm DIN Connector, male only*, no light Images shown may not represent all part numbers listed. 71.10 36 Series Plug-In Valves for Use with ECD Plug-In Manifolds and MAConnect™ Manifolds 30.50 36 Plug In Valve See pages 2-23 and 2-24 for Manifold options. 36 Series Plug-In Manifold Mount Valves Images shown may not represent all part numbers listed. Model Number Cv Description 36A-J00-00-JAAP-1FH 0.3 120 VAC, with Light 36A-J00-00-JDAP-1FE 0.3 24 VDC, 5.4 watt with Light and Diode, Positive Common 36A-J00-00-JDAP-1FK 0.3 24 VDC, 5.4 watt with Light and Diode, Negative Common 36A-J00-00-JDEP-1FE 0.15 24 VDC, 1.8 watt with Light and Diode, Positive Common 36A-J00-00-JDEP-1FK 0.15 24 VDC, 1.8 watt with Light and Diode, Negative Common 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-8 1/8" NPT Ports 1 DIRECTIONAL CONTROL VALVES Large 3-Way IN-Stock MAC Valves 52 Series Individual Inline Valves “KJ” Option 2 Note: Above valves are pilot operated. Minimum operating pressure for internal pilot valves is 20 PSIG. NOrMAlly ClOSED 120/60, 110/50 VAC Inline Valves with 1/4" Ports Images shown may not represent all part numbers listed. Model Number Cv Pilot Type Connector 52A-11-BOA-DM-DJAJ-1KJ 1.5 INTERNAL 9.4 mm DIN Connector, male only* 52A-11-BOB-DM-DJAJ-1KJ 1.5 EXTERNAL 9.4 mm DIN Connector, male only* 24 VDC 1.8 Watt Inline Valves with 1/4" Ports Images shown may not represent all part numbers listed. Model Number Cv Pilot Type Connector 52A-11-B0A-DM-DFBJ-1KJ 1.5 INTERNAL 9.4 mm DIN Connector, male only* 52A-11-B0B-DM-DFBJ-1KJ 1.5 EXTERNAL 9.4 mm DIN Connector, male only* *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-9 DIRECTIONAL CONTROL VALVES Large 3-Way IN-Stock MAC Valves 52 Series Add-A-Unit Manifolds for Inline Valves 2 Add-A-Unit Manifold with “KJ” Option Add-A-Unit Manifolds for 52 Series Inline Valves (see page 2-9 for valve selection) Images shown may not represent all part numbers listed. Model Number Description Port CBM052A-00ABA-02 2 Station Add-a-Unit w/ end plate kit 3/8" NPT Inlet & Exhaust, 1/4" NPT Cylinder Ports CBM052A-00ABA-04 4 Station Add-a-Unit w/ end plate kit 3/8" NPT Inlet & Exhaust, 1/4" NPT Cylinder Ports CBM052A-00ABA-06 6 Station Add-a-Unit w/ end plate kit 3/8" NPT Inlet & Exhaust, 1/4" NPT Cylinder Ports CBM052A-01AEA-01 Add-a-Unit Middle Station 3/8" NPT Inlet & Exhaust, 1/4" NPT Cylinder Ports M-04001 Valve Blanking Plate — 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 9-10 DIRECTIONAL CONTROL VALVES Large 3-Way IN-Stock MAC Valves 55 Series Individual Valves 2 “AA” OPTION “JM” OPTION 55 Series dimensional drawings are located on page 2-12 Operating Pressure: 25-150 psi NC NO Note: External Pilot (see notes below) 120/60, 110/50 VAC Inline Valves, Internal Pilot Model Number Cv Port Connector 55B-12-PI-111AA 2.5 3/8" NPT J.I.C. Wiring box w/ 1/2" Conduit 55B-12-PI-111JM 2.5 3/8" NPT 11 mm DIN Connector, male only* Images shown may not represent all part numbers listed. 24 VDC 2.5 Watt Inline Valves, Internal Pilot Model Number Cv Port Connector 55B-12-PI-591AA 2.5 3/8" NPT J.I.C. Wiring box w/ 1/2" Conduit 55B-12-PI-591JM 2.5 3/8" NPT 11 mm DIN Connector, male only* Images shown may not represent all part numbers listed. external pilot option: 55 Series Valves can be converted from internal to external pilot by rotating the pilot adapter 180 degrees and unplugging the 10-32 or M-5 port provided. note: Also available with remote Air Operator. See Page 2-42. note: For mating 11mm DIN Connectors or molded cordsets, reference page 2-45. * 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-11 DIRECTIONAL CONTROL VALVES Large 3-Way IN-Stock MAC Valves 55 Series Individual Valves Dimensional Drawings 1= Inlet 2= Outlet 3= Exhaust 2 See page 2-42 for ordering details 56 Series Individual Valves Dimensional Drawings See page 2-13 for ordering information for the 56 Series See page 2-43 for ordering details 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-12 DIRECTIONAL CONTROL VALVES Large 3-Way IN-Stock MAC Valves 56 Series Individual Valves 2 NC NO 56 Series dimensional drawings are located on page 2-12 120/60, 110/50 VAC Inline Valves with 3/4" NPT Ports Images shown may not represent all part numbers listed. Model Number Cv Pilot Type Connector 56C-17-111JM 5.4 INTERNAL 11 mm DIN Connector, male only* 56C-37-111JM 5.4 EXTERNAL 11 mm DIN Connector, male only* 24 VDC 2.5 Watt Valves with 3/4" NPT Ports Images shown may not represent all part numbers listed. Model Number Cv Pilot Type Connector 56C-17-591JM 5.4 INTERNAL 11 mm DIN Connector, male only* 56C-37-591JM 5.4 EXTERNAL 11 mm DIN Connector, male only* *Note: For mating 11 mm DIN Connectors or molded cordsets, reference page 2-45. Changing from normally open to normally Closed: The 56 Series is supplied with a function plate between the solenoid pilot and the main valve. When this function plate is installed so that the “3-C” is visible, the valve operates as “Normally Closed”. When the function plate is installed so that “3-0” is visible, the valve will function as a “Normally Open” valve. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-13   A IN DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 44 Series 10mm 5-Ported Direct Solenoid Operated Inline Valves Valves suitable for use as an inline valve or with EBM style manifolds on page 2-15 2 Note: Dimensions are in mm, to convert to inches divide by 25.4 44 Series Single Solenoid Inline Valves Model Number Cv Port Electrical Connector 44C-AAA-GDCA-1KV .06 # 10-32 24 VDC, 1.8W Plug-in, Diode & LED, 18" Lead 44C-AAA-GDFA-1KV .10 #1 0-32 24 VDC, 4.0W Plug-in, Diode & LED, 18" Lead Images shown may not represent all part numbers listed. Operating Data Pressure Rating: Vacuum to 120 PSI Fluids: Air or inert gases. Lubrication: Not required, but if used, a medium aniline point oil (180°F to 210°F) is recommended. Ambient Temperature Range: 0°F to 120°F ( -18°C to 50°C) Flow Rating: See above. Electrical: General purpose class A, continuous duty, encapsulated. Coil leads #22AWG. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-14 EA EB B DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 44 Series Circuit Bar Manifolds with 10.5 mm Spacing for Inline Valves 2 ECF Style Manifold EBM Style Manifold See page 2-16 for details EBM Style Manifold Dimensions Note: Dimensions are in mm, to convert to inches divide by 25.4 INlET/EXHAUST POrT SIZE A B C D E F G H J K 1/8" NPTF 16.0 47.5 69.2 8.5 24.0 39.5 48.0 8.0 31.85 16.15 44 Series Circuit Bar Manifolds For Inline Valves (see page 2-14 for valve selection) PORTING Model Number Profile Number of Stations INLET & EXHAUST CyLINDER PORTS EBM44B - 002A - 02 High, 16mm 2 1/8" NPT 10-32 in valve body EBM44B - 002A - 04 High, 16mm 4 1/8" NPT 10-32 in valve body EBM44B - 002A - 06 High, 16mm 6 1/8" NPT 10-32 in valve body EBM44B - 002A - 08 High, 16mm 8 1/8" NPT 10-32 in valve body 30426-A Blank Station Plate – – – Images shown may not represent all part numbers listed. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-15 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 44 Series Circuit Bar Manifold with 10.5 mm Spacing for Base Mounted Valves 2 ECF Style Manifold Dimensions Note: Dimensions are in mm, to convert to inches divide by 25.4 44 Series Single Solenoid Plug-In Style Valves for Use with ECF Manifolds Model Number Cv Electrical Connector 44B-M00-GDC0-1DV .06 24 VDC, 1.8 Watt No Lead Wire, Plug-In, Diode & LED 44B-M00-GDF0-1DV .11 24 VDC, 4.0 Watt No Lead Wire, Plug-In, Diode & LED Images shown may not represent all part numbers listed. 44 Series Side Ported Circuit Bar Manifolds with 25 Pin SUB-D Connector Model Number No. of Stations Cylinder Port Size Inlet & Exhaust ECF44B-00BBA-RC04 4 #10-32 UNF 1/8 NPTF ECF44B-00BBA-RC06 6 #10-32 UNF 1/8 NPTF ECF44B-00BBA-RC08 8 #10-32 UNF 1/8 NPTF ECF44B-00BBA-RC10 10 #10-32 UNF 1/8 NPTF M-44003 Valve Cover Plate –––––––––– –––––––––– 24180 Wire Connector Plate –––––––––– –––––––––– VT-D25 25 PIN 10ft. SUB D Connector Cable Images shown may not represent all part numbers listed. Note: Manifolds Stocked with Positive Common, Negative Common available upon request. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-16 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves “BA” Option 45 Series Direct Solenoid Operated Valves With Flow “KJ” Option Controls 2 CYL B A Conduit option shown B A see pAge 2-18 IN EXH 120/60, CYL 110/50 VAC Single Solenoid Inline Valves with 1/8" NPT Ports B A B A Model Number Cv Flow Control Connector IN EXH 45A-AA1-DAAA-1BA .15 NO 18" Leads with Grommet 45A-AA2-DAAA-1BA .15 yES 18" Leads with Grommet CYL B A 45A-AA1-DAAJ-1KJ .15 NO 9.4 mm DIN Connector, male only* B A 45A-AA2-DAAJ-1KJ .15 yES 9.4 mm DIN Connector, male only* Images shown may not represent all part numbers listed. 24 VDC 5.4 Watt Single Solenoid Valves with 1/8" NPT Ports IN EXH Model Number Cv Flow Control Connector 45A-AA1-DDAA-1BA .15 NO 18" Leads with Grommet 45A-AA2-DDAA-1BA .15 yES 18" Leads with Grommet 45A-AA1-DDAJ-1KJ .15 NO 9.4 mm DIN Connector, male only* 45A-AA2-DDAJ-1KJ .15 yES 9.4 mm DIN Connector, male only* Images shown may not represent all part numbers listed. 24 VDC 1.8 Watt Single Solenoid Valves with 1/8" NPT Ports Model Number Cv Flow Control Connector 45A-AA1-DFBA-1BA .10 NO 18" Leads with Grommet 45A-AA2-DFBA-1BA .10 yES 18" Leads with Grommet 45A-AA1-DFBJ-1KJ .10 NO 9.4 mm DIN Connector, male only* 45A-AA2-DFBJ-1KJ .10 yES 9.4 mm DIN Connector, male only* Images shown may not represent all part numbers listed. *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-17 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 45 Series Double Solenoid Operated Valves CYL B A B A IN EXH 2 CYL B A B “BA” Option “KJ” Option A IN EXH 120/60 110/50 VAC Double Solenoid Inline Valves with 1/8" NPT Ports CYL B A Model Number Cv Connector B A 45A-GA1-DAAJ-1KJ .18 9.4 mm DIN Connector, male only* 45A-GA1-DAAA-1BA .18 18" Leads with grommet Images shown may not represent all part numbers listed. IN EXH 24 VDC 5.4 Watt Double Solenoid Inline Valves with 1/8" NPT Ports Model Number Cv Connector 45A-GA1-DDAJ-1KJ .15 9.4 mm DIN Connector, male only* 45A-GA1-DDAA-1BA .15 18" Leads with grommet Images shown may not represent all part numbers listed. *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. Accessory for 45 Series Solenoid Operated Valves with “BA” Option Model Number Connector E-45056 Metal Bolt-On Conduit Adapter Images shown may not represent all part numbers listed. “BA” Option “KJ” Option 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-18 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 45 Series Manifold Mount Valves 2 For ordering information see page 2-20. Add-A-Unit Manifolds Fixed length Manifolds 120/60 110/50 VAC Single Solenoid Valves for Manifold Mounting NO BASE Model Number Cv Connector 45A-L00-DAAA-1BA .13 18" Lead Wires 45A-L00-DAAJ-1KJ .13 Single 9.4mm DIN Connector, male only* 45A-M00-DAAA-1BA .13 18" Lead Wires with Gauge Port 45A-M00-DAAJ-1KJ .13 Single 9.4mm DIN Connector, male only*, with Gauge Port Images shown may not represent all part numbers listed. 120/60 110/50 VAC Double Solenoid Valves for Manifold Mounting NO BASE Model Number Cv Connector 45A-N00-DAAA-1BA .13 18" Lead Wires 45A-N00-DAAJ-1KJ .13 Double 9.4mm DIN Connector, male only* Images shown may not represent all part numbers listed. 24 VDC 1.8 Watt Single Solenoid Valves for Manifold Mounting NO BASE Model Number Cv Connector 45A-L00-DFBA-1BA .11 18" Lead Wires 45A-L00-DFBJ-1KJ .11 Single 9.4mm DIN Connector, male only* 45A-M00-DFBA-1BA .11 18" Lead Wires with Gauge Port 45A-M00-DFBJ-1KJ .11 Single 9.4mm DIN Connector, male only*, with Gauge Port Images shown may not represent all part numbers listed. 24 VDC 5.4 Watt Double Solenoid Valves for Manifold Mounting NO BASE Model Number Cv Connector 45A-N00-DDAA-1BA .13 18" Lead Wires 45A-N00-DDAJ-1KJ .13 Double 9.4mm DIN Connector, male only* Images shown may not represent all part numbers listed. *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-19 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves Manifolds suitable for use with valves on page 2-19 45 Series Fixed Length and Add-A-Unit Manifolds Note: Dimensions are in mm, to convert to inches divide by 25.4 2 The overall length of a bar, when all stations are identical, is one less than the number of stations times the center distances selected, plus 42 mm (to provide common inlet, exhaust and mounting holes.) Fixed Length Manifolds with Side Outlet Ports PORTING Model Number No. of Stations INLET & EXHAUST CyLINDER PORTS EBM45A-001A-02 2 1/8" NPT 1/8" NPT EBM45A-001A-04 4 1/8" NPT 1/8" NPT EBM45A-001A-06 6 1/8" NPT 1/8" NPT EBM45A-001A-08 8 1/8" NPT 1/8" NPT M-45010 Blank Station Plate Images shown may not represent all part numbers listed. Add-A-Unit Manifold Components (See page 2-19 for dimension details) PORTING Model Number Description INLET & EXHAUST CyLINDER PORTS 45A-0AC Manifold Base 1/4" NPT 1/8" NPT 45A-0AD Manifold Base with Flow Control 1/4" NPT 1/8" NPT 45A-0AJ Manifold Base w/regulator w/locking knob 1/4" NPT 1/8" NPT 45A-0AK Manifold Base w/flow control & regulator w/knob 1/4" NPT 1/8" NPT M-45008-01 End Plate Kit (1 required per assembly) 1/4" NPT M-45010 Blank Station Plate - - N-45008 Isolator, Inlet and Exhaust - - N-45009 Isolator, Inlet Only - - N-45010 Isolator, Exhaust Only - - ™ PMG-160 The Micro Gauge 0-160 PSI (see page 2-51) - - N-35005 Gauge Adaptor - - Images shown may not represent all part numbers listed. Manifold bases include all required gaskets and mounting hardware. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-20 70.9 19.3 22.50 DIRECTIONAL CONTROL VALVES 46 Series Direct Operating Inline Valves Dimensions shown in millimeters (mm) 2 50.15 GGG/GA Option KJ/KR Option 4-Way Inline Valves 120/60, 110/50 VAC with 1/8" NPT Ports Model Number Cv Connector MAC-46A-AA1-JAAA-1GGG 0.3 18" Mac Jac leads with Ground wire, no light MAC-46A-AA1-JAA0-1KR 0.3 9.4 mm DIN Connector, male only*, no light Images shown may not represent all part numbers listed. 3.20 B 3.00 3.8 29.6 32.50 4-Way Inline Valves 24 VDC, 5.4 watt with 1/8" NPT Ports 46 Series Inline Valve Model Number Cv Connector MAC-46A-AA1-JDAA-1GA 0.3 18" Mac Jac leads without light or diode MAC-46A-AA1-JDA0-1KJ 0.3 9.4 mm DIN Connector, male only*, no light Images shown may not represent all part numbers listed. 4-Way Inline Valves 24 VDC, 1.8 watt with 1/8" NPT Ports Model Number Cv Connector MAC-46A-AA1-JDEA-1GA 0.2 18" Mac Jac leads without light or diode MAC-46A-AA1-JDE0-1KJ 0.2 9.4 mm DIN Connector, male only*, no light Images shown may not represent all part numbers listed. *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-21 1/8" NPT Ports A 1/4" NPT Ports DIRECTIONAL CONTROL VALVES 46 Series Non Plug-In Valves for EBM Manifold Mounting Dimensions shown in millimeters (mm) 1/8" NPT Ports 95.50 60.50 90.50 5.00 16.50 5.00 5.25 50.00 75.00 78.98 EBM Non Plug-In Manifold 46 Series 4-Station EBM Non Plug-In Manifold 2 4-Way Plug-In Manifold Mount Valves 120/60, 110/50 VAC Model Number Cv Description MAC 46A-L00-JAA0-1KR 0.3 9.4 mm DIN connector, male only* Images shown may not represent all part numbers listed. 4-Way Manifold Valves 24 VDC, 5.4 watt Model Number Cv Description MAC 46A-L00-JDA0-1KJ 0.3 9.4 mm DIN connector, male only* Images shown may not represent all part numbers listed. 4-Way Manifold Valves 24 VDC, 1.8 watt Model Number Cv Description MAC 46A-L00-JDE0-1KJ 0.15 9.4 mm DIN connector, male only* Images shown may not represent all part numbers listed. 46 Series Fixed Length EBM Manifolds with Side Ports Model Number No. of Stations Inlet & Exhaust Cylinder Ports EBM46A-00AAA-02 2 1/4" NPT 1/8" NPT EBM46A-00AAA-04 4 1/4" NPT 1/8" NPT EBM46A-00AAA-06 6 1/4" NPT 1/8" NPT EBM46A-00AAA-08 8 1/4" NPT 1/8" NPT EBM46A-00AAA-10 10 1/4" NPT 1/8" NPT Images shown may not represent all part numbers listed. Non Plug-In Manifold Accessories Model Number Description PR46A-BBAA Sandwich Regulator w/Knob, Gauge Port, 0-120 PSI FC46A-BA Sandwich Flow Control M-46002 Blank Station Plate PMG-160 1/8'' NPT, 0-160 PSI Gauge, 23mm Face Diameter (see page 2-51) Images shown may not represent all part numbers listed. *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-22 IN EXH 2 2 2 2 1 1 1 1 1/4" NPT Ports DIRECTIONAL CONTROL VALVES 46 Series Plug-In Valves for Use with ECD Plug-In Manifolds and MAConnect™ Manifolds 71.10 30.50 46 Series Plug In Valve 46 Series Plug-In Manifold Mount Valves Images shown may not represent all part numbers listed. 2 Model Number Cv Description 46A-L00-00-JAAP-1FH 0.3 120 VAC, with Light 46A-L00-00-JDAP-1FE 0.3 24 VDC, 5.4 watt with Light and Diode, Positive Common 46A-L00-00-JDAP-1FK 0.3 24 VDC, 5.4 watt with Light and Diode, Negative Common 46A-L00-00-JDEP-1FE 0.2 24 VDC, 1.8 watt with Light and Diode, Positive Common 46A-L00-00-JDEP-1FK 0.2 24 VDC, 1.8 watt with Light and Diode, Negative Common 36/46 Series Fixed Length ECD Plug-In Manifolds with Side Ports also for use with 36 Series Plug-In Valves on page 2-8 Images shown may not represent all part numbers listed. Model Number No. of Stations Inlet & Exhaust Cylinder Ports ECD46A-00AAA-A0-04 4 1/4" NPT 1/8" NPT ECD46A-00AAA-A0-06 6 1/4" NPT 1/8" NPT ECD46A-00AAA-A0-08 8 1/4" NPT 1/8" NPT ECD46A-00AAA-A0-10 10 1/4" NPT 1/8" NPT 32843 Conduit Plug Dimensions shown in millimeters (mm) 1/8" NPT Ports 89.50 70.50 83.80 40.00 5.70 16.50 6.50 87.68 ECD Plug-In Manifold 46 Series Fixed Length ECD Plug-In Manifold 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-23 EXH IN COND EXH IN DIRECTIONAL CONTROL VALVES ™ 46 Series MAConnect Manifold Unit with Side Ports also suitable for use with 36 Series Plug-In Valves on page 2-8 Images shown may not represent all part numbers listed. Model Number Description 46A-0MA-EC MAConnect™ Single Solenoid Base M-46006-01-01 Left End Plate MAConnect™ M-46005-25-2 Right End with 25 Pin Sub-D, Positive Common MAConnect™ M-46005-25-2=1705 Right End with 25 Pin Sub-D, Negative Common MAConnect™ 113.45 78.00 109.05 47.50 4.40 2 16.50 4.00 Sample BOM for Drawing: Valve Stack Consists of: 52.50 4 - 46A-L00-00-JAAP-IFH 95.50 4 - 46A-0MA-EC 4.25 1 - M-46006-01-01 1 - M-46005-25-2 ™ 46 Series MAConnect Manifold ™ MAConnect Manifold (shown with optional regulator) Plug-In Manifold Accessories ™ for use with ECD Manifolds and MAConnect Images shown may not represent all part numbers listed. Model Number Description PR46A-ABAA Sandwich Regulator w/Knob, Gauge Port, 0-120 PSI FC46A-AA Sandwich Flow Control M-46002 Blank Station Plate 63299 Electrical Plug Cover ™ 28501 Isolator – Inlet MAConnect ™ 28502 Isolator – Exhaust MAConnect VT-D25 25 Pin Sub-D Connector Cable, 10' PMG-160 1/8'' NPT, 0-160 PSI Gauge, 23mm Face Diameter (see page 2-51) 32.9 16.0 8.3 1/8" Gauge Port Dimensions shown in millimeters (mm) 69.4 16.00 32.40 46 Series Sandwich Flow Control 46 Series Sandwich Regulator 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-24 151.35 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 42 Series Valves for Use with Plug in Add-A-Unit Manifolds and MAConnect™ We are pleased to announce the release of the new MAC Valves 42 and 48 series in this catalog. These valves utilize the innovative next generation of 4-Way piloted valves in which the pilot poppet is housed in the same body as the main valve spool. This “integral pilot” design reduces package size and cost, as well as provides for an ultra fast shifting valve. 2 The 42 Series - A high performance miniature valve package providing similar flow as other valves of greater package size. 42 Series 4-way piloted air valve is a single solenoid double solenoid MAConnect™ shown closed center 10 mm valve (stacks on 10.5mm centers) with a Cv of up to 0.35. double solenoid double solenoid open center 42 Series Valves for Use with Plug in Add-A-Unit and MAConnect™ Manifolds Manifolds on the Following Pages 2-26 and 2-27 Model Number Description 42A-AMA-000-GDCP-1DV Single Solenoid Plug in 24 VDC 1.8 Watt LED & Diode 42A-AMA-000-GDCP-1DV=1974 Single Solenoid Plug in 24 VDC 1.8 Watt LED & Diode w/Neg. Com. 42A-BMJ-000-GDCP-1GA Double Solenoid Plug in 24 VDC 1.8 Watt 42A-BMJ-000-GDCP-1GA=1974 Double Solenoid Plug in 24 VDC 1.8 Watt LED & Diode w/Neg. Com. 42A-EMJ-000-GDCP-1GA 3-Position Closed Center 24 VDC 1.8 Watt 42A-EMJ-000-GDCP-1GA=1974 3-Position Closed Center 24 VDC 1.8 Watt LED & Diode w/Neg. Com. 42A-FMJ-000-GDCP-1GA 3-Position Open Center 24 VDC 1.8 Watt 42A-FMJ-000-GDCP-1GA=1974 3-Position Open Center 24 VDC 1.8 Watt LED & Diode w/Neg. Com. Images shown may not represent all part numbers listed. 42 Series Accessories Model Number Description PR42A-AABA Sandwich Pressure Regulator FC42A-AB Sandwich Flow Control 32627 M-7 X 1/4" Fitting M-42004 Blank Station Kit PMG-160 The Micro Gauge™ 0-160 PSI (see page 2-51) 28454 Isolator Disc, Inlet requires 1 piece, exhaust requires 2 pieces 32843 Conduit Plug Images shown may not represent all part numbers listed. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-25 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 42 Series Plug in Add-A-Unit Manifold Bases Cv 0.35 Dimensions Without Flow Control 2 Plug in wired Add-A-Unit bases feature integral conduit raceway and the ability to remove valves without disturbing the wiring. Dimensions w/Flow Control End units incorporate “conduit thread” and mounting holes in addition to a valve station. A valve stack requires a left and right end wire base and as many middle stations wired bases as needed to complete the assembly. Specify valves and accessories on page 2-25 to complete assembly. A complete assembly consists of Bases, Valves, and Accessories. 42 Series Plug in Manifold w/ 1/4" O.D. Tube Cylinder Ports & 1/4" NPTF Pressure & Exhaust Model Number Description 42A-000-ELA Single Solenoid Left End Wired Base/Conduit. 42A-000-ELC Double Solenoid Left End Wired Base/Conduit. Images shown may not represent all part numbers listed. Model Number Description 42A-000-ENA Single Solenoid Right End Wired Base/Conduit. 42A-000-ENC Double Solenoid Right End Wired Base/Conduit. Images shown may not represent all part numbers listed. Model Number Description 42A-000-EJA Single Solenoid Middle Station. Wired Base/Conduit 42A-000-EJC Double Solenoid Middle Station. Wired Base/Conduit Images shown may not represent all part numbers listed. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-26 DIRECTIONAL CONTROL VALVES ™ 42 Series MAConnect The MAConnect™ System virtually eliminates base lead wires which need to be pulled through a conduit wire-way and terminated in a junction box. With the MAConnect™ System, the internal wiring has been replaced through utilization of a circuit board with a multi pin connector located inside each valve’s conduit area. The multi pin circuit board plugs into the circuit board of the 2 valve adjacent to it and ultimately into a multi pin connector or serial adapter block located on the end of the manifold assembly. (See page 2-36 for SUB D Connector pin out) 42 Series MAConnect™ Manifold Units 1/4" O.D. Tube Cylinder Ports & 1/4" NPTF Pressure & Exhaust Images shown may not represent all part numbers listed. Model Number Description 42A-000-EL3 Single Solenoid Left End 42A-000-EL4 Double Solenoid Left End 42A-000-EJ3 Single Solenoid Middle 42A-000-EJ4 Double Solenoid Middle M42005-25-3 25 Pin Sub D Right End, Positive Common M42005-25-3=1974 25 Pin Sub D Right End, Negative Common VT-D25 25 PIN 10 ft. SUB D Connector Cable Sample BOM for Drawing: Valve Stack Consists of: 1 pc – 42A-000-El3 3 pcs – 42A-000-EJ3 1 pc – M-42005-25-3 4 pcs – 42A-AMA-000-GDCP-1DV rIGHT lEFT 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-27 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 48 Series Valves for use with Plug in and MAConnect™ Manifolds Cv 1.0 The 48 Series, like the 42 Series is a high performance valve in a miniature package, able to provide outstanding flow relative to its size as compared to the competition. The 48 Series is a 16mm (stacks on 16.5mm centers) with a Cv of up to 1.0. 2 Plug in Add-A-Unit Conduit Connection Shown single solenoid double solenoid closed center double solenoid double solenoid open center 48 Series Valves for use with Plug in Add-A-Unit and MAConnect™ Manifolds Model Number Description 48A-AMA-000-GDCP-1DV Single Solenoid / 24 Volt 1.8 Watt Plug In w/LED & Diode 48A-AMA-000-GDCP-1DV=1974 Single Solenoid / 24 Volt 1.8 Watt Negative Common w/LED & Diode 48A-BMJ-000-GDCP-1GA Double Solenoid / 24 Volt 1.8 Watt Plug In w/LED & Diode 48A-BMJ-000-GDCP-1GA=1974 Double Solenoid / 24 Volt 1.8 Watt Negative Common w/LED & Diode 48A-EMJ-000-GDCP-1GA Closed Center 24 Volt 1.8 Watt Plug In w/LED & Diode 48A-EMJ-000-GDCP-1GA=1974 Closed Center 24 Volt 1.8 Watt Negative Common w/LED & Diode 48A-FMJ-000-GDCP-1GA Open Center 24 Volt 1.8 Watt Plug In w/LED & Diode 48A-FMJ-000-GDCP-1GA=1974 Open Center 24 Volt 1.8 Watt Negative Common w/LED & Diode Images shown may not represent all part numbers listed. Other voltages available upon request 48 Series Plug in Add-A-Unit Manifolds Model Number Description Port Size Location 48A-000-ALA Single Left End Wired Base/Conduit 3/8"NPTF Inlet/Exhaust 48A-000-ALC Double Left End Wired Base/Conduit 3/8"NPTF Inlet/Exhaust 48A-000-AJA Single Middle Wired Base/Conduit 1/8"NPTF Side Cylinder Ports 48A-000-AJC Double Middle Wired Base/Conduit 1/8"NPTF Side Cylinder Ports 48A-000-ANA Single Right End Wired Base/Conduit 3/8"NPTF Inlet/Exhaust 48A-000-ANC Double Right End Wired Base/Conduit 3/8"NPTF Inlet/Exhaust 32845 Conduit Plug — — Images shown may not represent all part numbers listed. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-28 DIRECTIONAL CONTROL VALVES ™ 48 Series MAConnect Manifold assemblies require left end, middle, and 25 Pin SUB D Connector Units (See Page 2-36 for SUB D Connector Pinout) 2 48 Series Manifold Base MAConnect™ Model Number Port Size Location Description 48A-000-AL3 3/8" NPT Inlet & Exhaust Single Left End BASE 48A-000-AL4 3/8" NPT Inlet & Exhaust Double Left End BASE 48A-000-AJ3 1/8" NPT Cylinder Single Middle BASE 48A-000-AJ4 1/8" NPT Cylinder Double Middle BASE Images shown may not represent all part numbers listed. 48 Series Accessories Model Number Description 28471 48 Series Isolator M-48001-25-3 25 Pin Sub D Right End, Positive Common M-48001-25-3=1974 25 Pin Sub D Right End, Negative Common VT-D25 25 Pin 10ft Sub D Connector Cable M-48004 Blank Station Plate PR48A-AAAA Sandwich Regulator with Knob FC48A-AB Sandwich Flow Control PMG-160 The Micro Gauge 0-160 PSI (see page 2-51) Images shown may not represent all part numbers listed. Sample BOM for Drawing: Valve Stack Consists of: 1 pc – 48A-000-Al3 3 pcs – 48A-000-AJ3 1 pc – M-48001-25-3 4 pcs – 48A-AMA-000-GDCP-1DV 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-29 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 400 Series Individual Inline Solenoid Pilot Operated Valves C V=1.0 Single with Double with “KJ” Option “KJ” Option Valves suitable for use as inline or with manifolds on page 2-31 Single Solenoid Valves with 1/4" NPT Inlet & Cylinder Ports, 1/8" NPT Exhaust Ports 2 Model Number Pilot Type Electrical Connector 411A-B0A-DM-DJAJ-1KJ I NTERNAL 120/60, 110/50 9.4 mm DIN, male only* 411A-B0B-DM-DJAJ-1KJ EXTERNAL 120/60, 110/50 9.4 mm DIN, male only* 411A-B0A-DM-DFBJ-1KJ INTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* 411A-B0B-DM-DFBJ-1KJ EXTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* Images shown may not represent all part numbers listed. Double Solenoid Valve with 1/4" NPT Inlet & Cylinder Ports, 1/8" NPT Exhaust Ports Model Number Pilot Type Electrical Connector 421A-B0A-DM-DJAJ-1KJ INTERNAL 120/60, 110/50 9.4 mm DIN, male only* 421A-B0B-DM-DJAJ-1KJ EXTERNAL 120/60, 110/50 9.4 mm DIN, male only* 421A-B0A-DM-DFBJ-1KJ INTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* 421A-B0B-DM-DFBJ-1KJ EXTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* Images shown may not represent all part numbers listed. Double Solenoid, Three Position, Closed Center Valves with 1/4" NPT Inlet & Cylinder Ports, 1/8" NPT Exhaust Ports Model Number Pilot Type Electrical Connector 451A-B0A-DM-DJAJ-1KJ INTERNAL 120/60, 110/50 9.4 mm DIN, male only* 451A-B0B-DM-DJAJ-1KJ EXTERNAL 120/60, 110/50 9.4 mm DIN, male only* 451A-B0A-DM-DFBJ-1KJ INTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* 451A-B0B-DM-DFBJ-1KJ EXTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* Images shown may not represent all part numbers listed. Double Solenoid, Three Position, Open Center Valves with 1/4" NPT Inlet & Cylinder Ports, 1/8" NPT Exhaust Ports Model Number Pilot Type Electrical Connector 461A-B0A-DM-DJAJ-1KJ INTERNAL 120/60, 110/50 9.4 mm DIN, male only* 461A-B0B-DM-DJAJ-1KJ EXTERNAL 120/60, 110/50 9.4 mm DIN, male only* 461A-B0A-DM-DFBJ-1KJ INTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* 461A-B0B-DM-DFBJ-1KJ EXTERNAL 24 VDC, 1.8 W 9.4 mm DIN, male only* Images shown may not represent all part numbers listed. *Note: For mating 9.4 mm DIN Connectors or molded cordsets, reference page 2-44. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-30 DIRECTIONAL CONTROL VALVES Small 4-Way IN-Stock MAC Valves 400 Series Add-A-Unit Manifolds for Inline Valves For Valves See page 2-30 MANIFOLD BASE ONLY End Plate Kit 2 Add-A-Unit Manifold Middle Station Add-A-Unit Manifold with "KJ" OPTION Model Number Description Port CBM403A-00ABA-02 2 Station Add-a-Unit (includes end plate kit) 3/8" NPT CBM403A-00ABA-04 4 Station Add-a-Unit (includes end plate kit) 3/8" NPT CBM403A-00ABA-06 6 Station Add-a-Unit (includes end plate kit) 3/8" NPT CBM403A-01AEA-01 Add-a-Unit Middle Station (includes hardware) 3/8" NPT M-04001 Blank Station Plate – 28408 Isolator Disc, 1 required for Inlet, – Isolator Disc, 2 required for Exhaust Images shown may not represent all part numbers listed. Note: Dimensions are in mm, to convert to inches divide by 25.4 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-31 DIRECTIONAL CONTROL VALVES Valves suitable for use as Large 4-Way IN-Stock MAC Valves individual base mount, conduit 92 Series Sub-Base Plug-In Pilot Operated Valves Cv=1.2 add-a-unit manifold ™ and MAConnect on Single pages 2-33 and 2-34. Solenoid Double Solenoid Single Solenoid, Two Position Valves with Lights In Body, No Base 2 Model Number Description 92B-AAB-000-DM-DJAP-2DG 120/60, 110/50 VAC and ground wire 92B-AAF-000-DM-DFBP-2DM 24 VDC 1.8 Watt with diode Images shown may not represent all part numbers listed. Double Solenoid, Two Position Valves with Lights In Body, No Base Model Number Description 92B-BAB-000-DM-DJAP-2DG 120/60, 110/50 VAC and ground wire 92B-BAF-000-DM-DFBP-2DM 24 VDC 1.8 Watt with diode Images shown may not represent all part numbers listed. Double Solenoid, Three Position Closed Center Valves with Lights in Body, No Base Model Number Description 92B-EAB-000-DM-DJAP-2DG 120/60, 110/50 VAC and ground wire 92B-EAF-000-DM-DFBP-2DM 24 VDC 1.8 Watt with diode Images shown may not represent all part numbers listed. Double Solenoid, Three Position Open Center Valves with Lights In Body, No Base Model Number Description 92B-FAB-000-DM-DJAP-2DG 120/60, 110/50 VAC and ground wire 92B-FAF-000-DM-DFBP-2DM 24 VDC 1.8 Watt with diode Images shown may not represent all part numbers listed. Double Solenoid, Three Position Pressure Center Valves with Light In Body, No Base Model Number Description 92B-GAB-000-DM-DJAP-2DG 120/60, 110/50 VAC and ground wire 92B-GAF-000-DM-DFBP-2DM 24 VDC 1.8 Watt with diode Images shown may not represent all part numbers listed. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-32 DIRECTIONAL CONTROL VALVES Large 4-Way IN-Stock MAC Valves 92 Series Inline and Add-A-Unit Bases Individual Inline Bases Model Number Description 92B-000-BAA 1/4" NPT Side Ported Valve Base 92B-000-CAA 3/8" NPT Side Ported Valve Base Images shown may not represent all part numbers listed. Conduit Add-A-Unit Manifold Bases and Accessories (Includes all hardware) Model Number Description 2 92B-000-BJA 1/4" NPT Side Ported Manifold Base 92B-000-CJA 3/8" NPT Side Ported Manifold Base M-92004-01-01 Manifold End Plate Kit, Internal Pilot, Inlet and Exhaust Size = 3/8" NPTF M-92004-02-01 Manifold End Plate Kit, External Pilot, Inlet and Exhaust Size = 3/8" NPTF M-92002 Blank Station Cover Plate N-92018 Isolator Disc, Inlet or Exhaust, Non-MAConnect 32848 Conduit Plug Images shown may not represent all part numbers listed. Accessories for Inline and Manifold Valves Model Number Description FC92B-AA Sandwich Flow Control, Single Solenoid FC92B-BA Sandwich Flow Control, Double Solenoid PR92C-KAAA Sandwich Pressure Regulator with Knob N-92006-01 0-120 PSI, Pressure Gauge with fitting kit M-92007-01 92B to numatics Mark8 Adapter Plate - Internal Pilot Single Solenoid Plug-In M-92007-02 92B to numatics Mark8 Adapter Plate - Internal Pilot Double Solenoid Plug-In M-92007-03 92B to numatics Mark8 Adapter Plate - Exterior Pilot Single Solenoid Plug-In M-92007-04 92B to numatics Mark8 Adapter Plate - Exterior Pilot Double Solenoid Plug-In Images shown may not represent all part numbers listed. Note: Dimensions are in mm, to convert to inches divide by 25.4 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-33 DIRECTIONAL CONTROL VALVES ™ 92 Series MAConnect with Sub D 2 92 Series Manifold Base MAConnect™ 3/8" NPTF Cylinder Inlet and Exhaust Ports For Valve Selection See page 2-32 Model Number Description - - 92B 000 CJ3 Single Solenoid, Middle, Positive Common 92B-000-CJ3=1705 Single Solenoid, Middle, Negative Common - - 92B 000 CJ4 Double Solenoid, Middle, Positive Common 92B-000-CJ4=1705 Double Solenoid, Middle, Negative Common - - 92B 000 CL3 Single Solenoid, Left End, Positive Common - - 92B 000 CL3=1705 Single Solenoid, Left End, Negative Common - - 92B 000 CL4 Double Solenoid, Left End, Positive Common - - 92B 000 CL4=1705 Double Solenoid, Left End, Negative Common - - - M 92012 25 3 Right End Block With 25 pin Sub-D Connector, Negative Common - - - M 92010 25 3 Right End Block With 25 pin Sub-D Connector, Positive Common VT-D25 10' 25 PIN SUB D Connector Cable N-92018 Isolator Disc, MAConnect™ only, (1 required for Inlet, 2 required for Exhaust) Images shown may not represent all part numbers listed. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-34 DIRECTIONAL CONTROL VALVES 92 Series MAConnect™ ™ 92 Serie With Multi-Pin Connector On Right End s MAConnect with Sub D MAConnect™ Dimensions for 92 Series Valves with Multi-Pin Connector On Right End Cylinder Ports This End Sample BOM for drawing Valve Stack Consists of: 6.2 Dia. 3 Places 1 pc – 92B-000-Cl4 4 pcs – 92B-000-CJ3 2 1 pc – M-92010-25-3 1 pc – 92B-BAF-000- DM-DFBP-2DM 4 pcs – 92B-AAF-000- 146.5 DM-DFBP-2DM 141.0 118.7 71.8 52.0 36.5 25.0 26.8 Note: All Dimensions Shown Are In Millimeters For Illustration Purposes Only 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-35 DIRECTIONAL CONTROL VALVES ™ MAConnect Specifications Connector Pin Out Positive Common 1 2 3 4 5 6 7 8 9 10 11 12 13 11 12 1 2 3 4 5 6 7 8 9 10 13 42, 46, 48 Series 14 15 16 17 18 19 20 21 22 23 24 25 14 15 16 17 18 19 20 21 22 23 24 25 - Maximum of 16 solenoids can be powered by Single Multi-Pin Connector 92, 93 Series 2 - Maximum of 20 solenoids can be powered by Single Multi-Pin Connector - Maximum allowable coil amperage is 250 milliamps - Standard AC and DC voltage options available FlUIDS: 20 to 120 PSI (Internal Pilot) Compressed Air or Inert Gases Vacuum to 120 PSI (External Pilot) 35 to 120 PSI (3 Position, Internal/External Pilot) lUBrICATION: 36/46 Series — Vacuum to 120 PSI Not required. If used, select a medium aniline point lubricant (between 180°F and 210°F) SAFE OPErATING TEMPErATUrE rANGE: 0°F to 120°F (-18°C to 50°C) PrESSUrE rANGE: Wiring Instructions VT-D25 Wire Colors 42 & 48 Series Add-A-Unit Manifold 46 Series ECD Manifold pin nuMbeR wiRe / ColoR When Using Positive Common Valves 1 White / Black Positive Common Single Solenoid Plain yellow – Positive 2 Blue / Black Red – Positive yellow w/NEG (Tracer) – Negative 3 red Black (Solenoid 14) – Negative 4 red / White When Using Negative Common Valves 5 red / Black Negative Common Single Solenoid – MOD 1974 6 Orange Plain yellow – Negative 7 Orange / red Red – Negative yellow w/NEG (Tracer) – Positive 8 Orange / Black Black (Solenoid 14) – Positive 9 Black / red 10 White / red Positive Common Double Solenoid 92 & 93 Inline and Add-A-Unit Bases 11 Green Black – Positive 12 Green / White “A” Solenoid 13 Green / Black Red (Solenoid 12) – Negative yellow – Positive 14 Blue / red yellow (Solenoid 14) – Negative yellow / Black – Negative 15 White 16 red / Green Negative Common Double Solenoid – MOD 1974 “B” Solenoid 17 Orange / Green Black – Negative 18 Black Red – Positive 19 Black / White Red (Solenoid 12) – Positive Red / Black – Negative 20 Blue yellow (Solenoid 14) – Positive 21 Blue / White 22 Black / White / red 23 White / Black / red 24 red / Black / White 25 Green / Black / White 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-36 DIRECTIONAL CONTROL VALVES Murrelektronik Cube67 2 “Free yourself from the controls” – Change the bus Action Automation and Controls is pleased instead of the system – you change only the to announce the availability of the Murr- bus coupler elektronik Cube67 Modular Bus System. This makes the machine installation independent of the controls and the field bus, which means that the application can be Cube67 is a decentralized I/O system which combines the adapted to the final customer’s SPC specifications without you protection of IP20 and IP67 with the help of its I/O modules – having to modify the I/O periphery plug connected, robust and fully potted. Starting at the bus coupler, the I/O layer spreads radially throughout the applica- “Don’t look for errors – find them” – Total diagnostic tion – connected via hybrid cable. Digital, analog and serial That means detailed information on type and location of the signals, temperature sensing, counters, valve cluster, drive or fault or error service panel coupling are available. The system offers end-to- Single-channel diagnostic and shut down end, channel-specific debugging right down to the sensor/ actuator. The digital channels are freely programmable, so that Quicker set-up… Assemble and plug in – that’s all! the plug position or the signal terminal can be used as an input Elaborate parallel and single-core wiring replaced by or output (multifunctional). quick, simple plugging Only one hybrid cable instead of wide cable conduits Economical distribution… modular, compact and robust Contact Action Automation for Application The I/O layer is where you need it – right in the machine, and Assistance. close to the sensors and actuators, instead of occupying one large area, or being concentrated in the control cabinet Highest flexibility… reduces unused sources with multifunctional I/Os That means free parameterization of the two signals on each plug position, whether input, debugging input or output 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-37 DIRECTIONAL CONTROL VALVES Large 4-Way IN-Stock MAC Valves 93 Series Sub-Base Plug-In Pilot Operated Valves Double, Single, or 3-Position Valves suitable for use with individual base mount, 2 conduit add-a-manifold on page 2-39, or MAConnect™ on page 2-40. Single Solenoid, Two Position Valve, No Base Model Number Description 93A-AAB-000-DM-DFBP-2DM 24 VDC, 1.8 Watt 93A-AAB-000-DM-DJAP-2DG 120/60, 110/50 VAC & ground wire Images shown may not represent all part numbers listed. Double Solenoid, Two Position Valve, No Base Model Number Description 93A-BAB-000-DM-DFBP-2DM 24 VDC, 1.8 Watt 93A-BAB-000-DM-DJAP-2DG 120/60, 110/50 VAC & ground wire Images shown may not represent all part numbers listed. Double Solenoid, Three Position Closed Center Valve, No Base Model Number Description 93A-EAB-000-DM-DFBP-2DM 24 VDC, 1.8 Watt 93A-EAB-000-DM-DJAP-2DG 120/60, 110/50 VAC & ground wire Images shown may not represent all part numbers listed. Double Solenoid, Three Position Open Center Valve, No Base Model Number Description 93A-FAB-000-DM-DFBP-2DM 24 VDC, 1.8 Watt 93A-FAB-000-DM-DJAP-2DG 120/60, 110/50 VAC & ground wire Images shown may not represent all part numbers listed. 9-10 rEV. 3.5 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-38 2-08 DIRECTIONAL CONTROL VALVES Large 4-Way IN-Stock MAC Valves 93 Series Inline and Add-A-Unit Bases Side Ported Individual Inline Bases Images shown may not represent all part numbers listed. Model Number Description 93A-000-BAA 3/8" NPT 93A-000-CAA 1/2" NPT Add-A-Unit Manifold Bases & Accessories (includes all hardware) Images shown may not represent all part numbers listed. Model Number Description 2 93A-000-BJA 3/8" NPT Side Ported Manifold Base 93A-000-CJA 1/2" NPT Side Ported Manifold Base M-93001-01-01 Manifold End Plate Kit - Internal Pilot M-93001-02-01 Manifold End Plate Kit - External Pilot M-93002 Blank Station Cover Plate Kit N-93008 Isolator Disk (1 required for Inlet, 2 required for Exhaust) Accessories for Inline and Manifold Valves Images shown may not represent all part numbers listed. Model Number Description FC93A-AB Sandwich Flow Control w/Locking Knob PR93A-GAAA Sandwich Regulator w/Knob, 0-120 PSI 32848 Conduit Plug Note: Dimensions are in mm, ADD-A-uNIt MANIFOLD BASE to convert to inches divide by 25.4 INDIvIDuAL BASE MANIFOLD BASE wIth rEguLAtOrS 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-39 DIRECTIONAL CONTROL VALVES ™ 93 Series MAConnect with Sub D 2 93 Series MAConnect™ Bases Images shown may not represent all part numbers listed. Model Number Description - - 93A 000 BJ3 3/8" NPT Side Ported, Single Solenoid, Middle, Positive Common 93A-000-BJ3=1705 3/8" NPT Side Ported, Single Solenoid, Middle, Negative Common - - 93A 000 BJ4 3/8" NPT Side Ported, Double Solenoid, Middle, Positive Common 93A-000-BJ4=1705 3/8" NPT Side Ported, Double Solenoid, Middle, Negative Common - - 93A 000 CJ3 1/2" NPT Side Ported, Single Solenoid, Middle, Positive Common - - 93A 000 CJ3=1705 1/2" NPT Side Ported, Single Solenoid, Middle, Negative Common - - 93A 000 CJ4 1/2" NPT Side Ported, Double Solenoid, Middle, Positive Common - - 93A 000 CJ4=1705 1/2" NPT Side Ported, Double Solenoid, Middle, Negative Common - - - M 93012 25 3 Right End Block With 25 Pin Sub-D Connector, Positive Common - - - M 93012 25 3=1705 Right End Block With 25 Pin Sub-D Connector, Negative Common - - - M 93014 01 01 Left End Fastening Plate, Internal Pilot N-93008 Isolator Disc, for use in inlet or exhaust ports VT-D25 10' 25 Pin Sub-D Connector VT-D25-25 25' 25 Pin Sub-D Connector Sample BOM for Drawing: 11.61 15.00 GAGE 22.80 23.25 1 – M-93014-01-01 Fastening Plate GAGE 87.50 87.50 4 – 93B-AAB-000-DM-DFBP-2DM Valve 236.81 2 – Pr93A-GAAA regulators 224.66 202.80 175.00 175.30 2 – FC93A-AB Flow Control 284.15 141.60 ø6.25mm 4 – 93A-000-BJ3 Middle Station 4 Places 83.22 1 – M-93012-25-3 right End with Sub-D 33.50 19.30 26.80 180.10 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-40 DIRECTIONAL CONTROL VALVES ™ 92/93 Series MAConnect Transition Plate This transition plate allows you to combine MAC 92 and 93 series valves on the same manifold with no additional wiring. 2 Images shown may not represent all part numbers listed. Model Number Description M-93020-01 MAConnect™ 92/93 Series Transition Plate Sample BOM for Drawing: 1 – M-93014-01-01 Fastening Plate 2 – 92B-AAF-000-DM-DFBP-2DM Valve 2 – 93A-AAAB-000-DM-DFBP-2DM Valve 2 – 92B-000-CJ3 Middle Station 2 – 93A-000-BJ3 Middle Station 1 – M-92010-25-3 right End with Sub-D 1 – M-93020-01 92/93 Transition Plate 11.61 26.25 12.80 31.84 ø6.20mm 3 Places 182.38 141.00 152.20 140.25 118.70 A A A A 83.16 87.50 72.65 33.50 33.50 26.80 25.00 19.30 196.60 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-41 92 93 B B B B DIRECTIONAL CONTROL VALVES Air Piloted IN-Stock MAC Valves Dimensions Available Upon request 2 2 35 Series Inline 3-Way Universal 1/8" NPT N.O. 3 N.C. 1 3 1 3 1 Model Number Cv Pilot Port Type 35A - AAA - RA11 .18 1/8" Single Air Pilot Images shown may not represent all part numbers listed. 2 CYL CYL B A B A B B A 45 Series, Inline A 4-Way 1/8" NPT IN IN EXH EXH Model Number Cv Pilot Port Type 45A - AA1 - RA11 .18 1/8" Single Air Pilot 45A - GA1 - RA11 .18 1/8" Double Air Pilot Images shown may not represent all part numbers listed. (See page 2-12 for dimensions) 2 2 55 Series Inline 3-Way 3/8" NPT 1 N.O. 1 3 N.C. 3 3 1 Model Number Cv Pilot Port Type 55B - 12 - RA 2.5 3/8" NPT Single Air Pilot Images shown may not represent all part numbers listed. CYL CYL CYL CYL BB 82 Series Inline BB AA AA BB BB AA AA 4-Way Base Mounted 1/4" NPT ININ ININ EXH EXH EXH EXH Model Number Cv Pilot Port Type 82A - AB - BAA - RA 1.35 1/8" Single Air Pilot 82A - BB - BAD - RA 1.35 1/8" Double Air Pilot Images shown may not represent all part numbers listed. 2 2 52 Series Inline 3-Way 1/4" NPT 1 N.O. 1 3 N.C. 3 3 1 Model Number Cv Pilot Port Type 52A -11-BOH-RA=1493 1.5 10/32 NPT Single Air Pilot Images shown may not represent all part numbers listed. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-42 DIRECTIONAL CONTROL VALVES Air Piloted IN-Stock MAC Valves (See page 2-12 for dimensions) 2 2 56 Series Inline 3-Way 3/4" NPT 1 N.O. 1 3 N.C. 3 Model Number Cv Pilot Port Type 56C-57-RA 6.2 1/8" NPT Single Air Pilot Images shown may not represent all part numbers listed. 2 CYL CYL CYL CYL BB BB AA AA BB BB AA AA 400 Series Inline ININ 4-Way 1/4" NPT Inlet & ININ EXH EXH EXH EXH Cylinder Ports, 1/8" NPT Exhaust Ports Model Number Cv Pilot Port Type 411A -BOH-RA=1493 1.0 10/32 NPT Single Air Pilot 421A -BOH-RA 1.0 10/32 NPT Double Air Pilot Images shown may not represent all part numbers listed. 411A-BOH-rA shown Dimensions Available Upon request 9-10 rEV. 3.5 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-08 2-43 DIRECTIONAL CONTROL VALVES IN-Stock Molded Cord Sets for MAC Valves 9.4 mm Mini DIN Used With “KJ” Catalog Designation FOr THE FOllOWING VAlVE SErIES: 35, 45, 52, & 400 with external plug in option MAC 35 Series Molded Connector Valve with E-45007 with Cord Set Connector Shown 2 Connector Only Images shown may not represent all part numbers listed. Description Model Number Catalog Code Plain Connector E-45007 KA KB Diode, No Light E-45009 120 VAC, M.O.V.,* No Light KC E-45010 120 VAC with Light E-45007-AA KD 240 VAC with Light E-45007-AB KD 24 VDC with Light E-45007-DA KD 24 Volt, LED Light & Diode E-45017-DA KG 120 VAC, M.O.V.,* With Light E-45010-AA KF *M.O.V.=AC Surge Protection 3 Meter Molded Cord Sets Only Images shown may not represent all part numbers listed. Model Number Description MAC Valves Connector Option 0 to 250 VAC/DC KA KA250NLS No Light or Suppression 12 to 24 VAC/DC KD & KE KDKE1224WLS with LED & Suppression 110 VAC/DC KD & KE KDKE110WLS with LED & Suppression FEATUrES & PIN CONFIGUrATION • Saves on Installation & Labor Costs dual ground • Durable Solid Plastic Construction • Impact Resistant • Superior Stain Relief • 100% Quality Control Tested • With or Without Suppression and LED • Rated to 5 Amp 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-44 DIRECTIONAL CONTROL VALVES IN-Stock Plug-In Connectors & Molded Cord Sets for MAC Valves 11 mm Rectangular DIN Used With “JM” Catalog Designation FOr THE FOllOWING VAlVE SErIES: 55, 56, & 100 with external plug in option Molded Connector with Cord Set E-01007 Connector 2 Photo Shown For DIN Connector Only Connector Only Description Model Number Catalog Code E-01007 JB Plain Connector E-01013-11 JD 120 VAC with Light E-01013-12 JD 240 VAC with Light E-01013-61 JD 24 VDC with Light Images shown may not represent all part numbers listed. 3 Meter Molded Cord Sets Only Model Number Description Ground Location Mac Valves at 6 or 12 o’clock Connector Option JB250NLSG6 0 to 250 VAC/DC 6 JB JD1224WLSG6 12 to 24 VAC/DC 6 JD JD110WLSG6 110 VAC/DC 6 JD Images shown may not represent all part numbers listed. FEATUrES & PIN CONFIGUrATION • Saves on Installation & Labor Costs • Durable Solid Plastic Construction • Impact Resistant • Superior Stain Relief • 100% Quality Control Tested • With or Without Suppression and LED • Rated to 5 Amp STANDArD MINI 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-45 DIRECTIONAL CONTROL VALVES 7000 Series Valves 2-Way Solenoid - Skinner/Parker A wide variety of valve designs and 7000 SErIES twO-wAY STANDArD MATErIAlS OF sizes allows the end user flexibility SOLENOID - DIrECt AND PILOt CONSTrUCTION: in valve selection and operation. OPErAtED MEChANICAL Body: Direct: Brass or Stainless Steel (430F) Honeywell 7000 series two- way valves ChArACtErIStICS: Pilot: Brass or Stainless Steel (316 and 430F) are available in almost any arrangement Seals: Direct: NBr, FKM, PCTFE as listed of porting, mounting, flow control, VAlVE TyPES: Pilot: NBr, FKM, as listed voltage and frequency. Normally closed, normally open Sleeve Tube: Stainless Steel (303 or 304) Plunger: Stainless Steel (430Fr) The valves are available in normally COMPATIBlE FlUIDS: lubricated Air, Stop: Stainless Steel (430Fr) closed, normally open and dual purpose Non-lubricated Air, Inert Gases, Water Springs: Stainless Steel (18-8) configurations, and are available with Hydraulic Fluids, Petroleum Products Pilot Orifice: Stainless Steel (303) coils that meet ordinary and hazardous and additional fluids compatible with 2 location requirements. The breadth materials of construction. Use of lEAKAGE: and versatility covered in this line non-lubricated gaseous media will Internal: provides compatibility with numerous substantially limit valve life. Direct: Bubbletight (elastomeric seals) applications. Among them are Pilot: Bubbletight dispensing, transportation equipment, External: None machine tools, vending, laundry equipment and instrumentation. Please see Next Page for IN-Stock 7000 Series Dimensional Drawings. Direct Operated Brass Body 2-Way NC (Non-Passing) Images shown may not represent all part numbers listed. Model Number Port Size Voltage Wattage Cv Orifice Pressure Max Diff. (Psig) Temp °F 7121KBN1NF00N0C111P3 1/8" 120 VAC 10 .31 1/8 0 TO 365 165 7121KBN1NF00N0C111C2 1/8" 24 VDC 10 .31 1/8 0 TO 125 165 7121KBN2NF00N0C111P3 1/4" 120 VAC 10 .31 1/8 0 TO 365 165 7121KBN2NF00N0C111C2 1/4" 24 VDC 10 .31 1/8 0 TO 125 165 71215SN2MN00N0C111P3 1/4" 120/60 10 .28 1/8 0 TO 150 185 Direct Operated Stainless Steel Body 2-Way NO (Passing) Images shown may not represent all part numbers listed. Model Number Port Size Voltage Wattage Cv Orifice Pressure Max Diff. (Psig) Temp °F 71295SN2KNJ1N0C111P3 1/4" 120 VAC 10 .15 3/32 0 TO 250 185 71295SN2KNJ1N0C111C2 1/4" 24 VDC 10 .15 3/32 0 TO 250 185 Pilot Operated Brass Body 2-Way NC (Non-Passing) Images shown may not represent all part numbers listed. Model Number Port Size Voltage Wattage Cv Orifice Pressure Max Diff. (Psig) Temp °F 7321KBN3SN00N0C111P3 3/8" 120/60 10 2.5 7/16 3 TO 150 185 VAC 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-46 DIRECTIONAL CONTROL VALVES 7000 Series Valves 3-Way Solenoid - Skinner/Parker A wide variety of valve designs and sizes 7000 SErIES thrEE-wAY STANDArD MATErIAlS OF allows the end user great flexibility in valve SOLENOID - DIrECt CONSTrUCTION: selection and operation. Honeywell 7000 OPErAtED MEChANICAL Body: Brass or Stainless Steel series three-way direct operating general ChArACtErIStICS: (430F or 303) service valves are available in almost any Seals: NBr, FKM, PCTFE as listed arrangement of porting, mounting, flow con- VAlVE TyPES: Sleeve Tube: trol, voltage and frequency. Normally closed Stainless Steel (303 or 304) Plunger: These valves are available in normally COMPATIBlE FlUIDS: lubricated Air, Stainless Steel (430Fr) closed, normally open, multipurpose and Non-lubricated Air, Inert Gases, Water, Stop: Stainless Steel (430Fr) diverting configurations, and are available Hydraulic Fluids, Petroleum Products Springs: with Ul approved coils that meet ordinary and additional fluids compatible with Stainless Steel (18-8) and hazardous location requirements. materials of construction. Use of Pilot Orifice: Stainless Steel (303) 2 The breadth and versatility covered in non-lubricated gaseous media will this line provides compatability with substantially limit valve life. lEAKAGE: numerous applications such as air and Internal: Direct: Bubbletight hydraulic cylinder actuation; dispensing, (elastomeric seals) trasnportation vending and laundry External: None equipment; automation, instrumentation, machine tools, heating and air conditioning. Direct Operated Stainless Steel Body 3-Way NC (Non-Passing) Images shown may not represent all part numbers listed. Model Number Port Size Voltage Wattage Cv Orifice Pressure Max Diff. (Psig) Temp °F 120/60VAC 71315SN1GN00N0C111P3 1/8" 10 .11 1/16 0 to 200 185 71315SN1GN00N0C111C2 1/8" 24 VDC 10 .11 1/16 0 to 200 185 120/60VAC 71315SN2GNJ1N0C111P3 1/4" 10 .11 1/16 0-200 185 7131TVN2NV00N0C111C2 1/4" 24VDC 10 .32 1/8 0-70 185 7000 Series Dimensional Drawings Direct Operated 2 Way NC (Non-Passing) Model No.’s: Direct Operated 7121KBN1NF00 & 7121KBN2NF00 3 Way NC (Non-Passing) Model No. 71315SN1GN00 3.07 2.63 1.61 1.57 Pilot Operated 2 Way NC (Non-Passing) Direct Operated 2 Way NO (Passing) Model No. 71295SN2KNJIN0 2.76 1.62 1.95 # 10-32 NF TH'D 2.97 x .25 DP-2 PLC'S 3.56 .44 1.96 3.82 (1/4 NPT) .88 3.65 (1/8 NPT) .44 1.97 1.82 .88 .34 1.62 DIA Model No. 7321KBN3SN00N0 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-47 DIRECTIONAL CONTROL VALVES Cam roller lever Operated Palm Button 1800 Series Manual Valves, 1/4" NPT Images shown may not represent all part numbers listed. 2 Model Number CV Description 180001 - 112 - 0014 1.1 Lever Cam Roller, Parallel to Ports 180001 - 112 - 0021 1.1 Lever, Locking, Push: Perpendicular to Body 180001 - 112 - 0022 1.1 Lever, Non-Locking, Push: Perpendicular to Body 180001 - 112 - 0023 1.1 Lever, Locking, Pull: Perpendicular to Body 180001 - 112 - 0024 1.1 Lever, Non-Locking, Pull: Perpendicular to Body 180001 - 112 - 0025 1.1 Lever, Locking, Push: Parallel to Body 180001 - 112 - 0026 1.1 Lever, Non-Locking, Push: Parallel to Body 180001 - 112 - 0027 1.1 Lever, Locking, Pull: Parallel to Body 180001 - 112 - 0028 1.1 Lever, Non-Locking, Pull: Parallel to Body 180001 - 112 - 0031 1.1 Push Button, Spring Return (specify button color) 180002 - 112 - 0034 1.1 Push Button, Push Pull (specify button color) 180001 - 112 - 0036 1.1 Palm Button, Spring Return (specify button color) 180002 - 112 - 0039 1.1 Palm Button, Push Pull (specify button color) Optional Colored Push Buttons Images shown may not represent all part numbers listed. Model Number Description 24080 RED Red Push Button 24080 GREEN Green Push Button 24080 BLACK Black Push Button 24080 WHITE White Push Button Optional Colored Palm Buttons Images shown may not represent all part numbers listed. Model Number Description 24077 RED Red Palm Button 24077 GREEN Green Palm Button 24077 BLACK Black Palm Button 24077 WHITE White Palm Button 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-48 DIRECTIONAL CONTROL VALVES Bimba 3-Way Disc Air Valve Operates single acting cylinders. Full 1/8" orifice –1/8" NPT inlet and outlet ports. To operate, a precision lapped disc is rotated through 60° by means of a ball handle which will hold set position. To repair, remove Model 3MV8 Model 4MV8 handle and retaining ring. Model Number: 3MV8 Bimba 4-Way Disc Air Valve Operates double acting cylinders. Ball handle will rotate through 120° and will hold set position –1/8" NPT ports are located 120° apart – Orifice 1/8" diameter. To repair, remove handle and retaining ring. 2 Model Number: 4MV8 Manual 4-Way Valves 4-Way Description and Specifications Application: Industrial and Commercial for 10-32 threaded fasteners (not supplied). applications requiring small 4-way function such Exhaust ports are not to be restricted. as double acting cylinders. Valve Type: 4-Way 2-Position 3 full ports 2 free 4-WAy MATErIAlS OF CONSTrUCTION: venting exhausts (non ported) Air Flow: AT 50 PSIG, 4.2 SCFM Body: Aluminum, plated with electroless nickel or AT 100 PSIG, 7.6 SCFM black anodize Force required for Full Button Travel: End Caps & Spool: Brass, electroless nickel plated Model PK 12 oz. nominal Stems: Stainless Steel (303) Button Stroke: 11/64" Spring: Stainless Steel (302) Input Pressure: 125 PSI max. Seals: Buna-N Temperature range: 32°F to 200°F Buttons: Nylon Mounting: By 15/32 - 32 male threads on one end Knob: Aluminum, black anodize mounting nuts (nuts and lockwashers supplied), or by 2 mounting lock Washer: Steel, nickel plated holes in the body. Holes (.200) are clearance holes A4C-100-PK 10-32 Threaded Ports A4C-100-Sr Images shown may not represent all part numbers listed. Model Number Porting Description A4C-100-PK 10-32 Panel Mount Push-Pull A4C-100-SR 10-32 Panel Mount Spring Return 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-49 DIRECTIONAL CONTROL VALVES Miniature Pneumatic Valves General Specifications for Push Button Materials - and Toggle Valves Body: Diecast Zinc or Brass Stem: Acetal Applications - Medical, Dental and Springs: Stainless Steel industrial equipment. Buttons and Toggles: Nylon Operators - Push buttons and toggles. Seals: BUNA-A Actuators - All actuators designed for Media - Air push button style valves are useable. Operating Pressure range - 0 to 125 PsiG (0-7 bar) Operating Temperature range - -20˚F to 160˚F (-28˚C to 71˚C) 2.12 REF. 1.83 REF 2 .60 .25 Toggle with Swivel Base .60 .25 10-32 TAP .31 10-32 TAP .31 A 1/8" NPT male w/ 10-32 threaded female port. This Detented Momentary Ø .62 Ø .62 85° configuration allows close mounting of valves in manifolds H0-30-1 F0-30-1 or piping with 10-32 fitings, 3-way non-passing. 1/2" HEX 1/2" HEX 1/8 NPT (M) 1/8 NPT (M) 15/32-32 10-32 TAP 15/32-32 10-32 TAP 1 23/32 2.12 REF. 1.83 REF 1 3/8 Ø 1/2 ROLLER 3/16 STROKE .60 51/64 45/64 .25 .60 .25 5/8 10-32 TAP .31 10-32 TAP .31 Ø 31/64 Ø 31/64 1/2 13/64 SLOT (2X) Ø 1/2 ROLLER Ø .62 Ø .62 3/16 STROKE 85° 1-1/8 1 3/8 1 3/8 11/32 SLOT 1/2" HEX 1/2" HEX 1-7/8 MAX. 1-1/16 MAX. 1/8 NPT (M) R 11/32 1/8 NPT (M) .53 .53 7/8 MIN. 15/32-32 10-32 TAP 15/32-32 10-32 TAP 1 9/64 .078 1/4 (2X) 5/64 BRACKET (REF.) 5/64 BRACKET (REF.) MB-1F Push Button With Swivel Base Flat Mounting Bracket A 1/8" NPT male w/ 10-32 threaded female This bracket may be used to mount One Way Cam Actuator port. This configuration allows close mounting any valve which has 15/32-32 thread This unit uses all the components of the CA-1 combined with an additional one of valves in manifolds or piping with 10-32 way acetal lever. fitings, 3 way non-passing A0-30-1 CA-2 1 23/32 Ø 1/2 ROLLER 3/16 STROKE 1 3/8 51/64 45/64 5/8 Ø 1/2 ROLLER Ø 31/64 Ø 31/64 1/2 13/64 SLOT (2X) 3/16 STROKE 1-1/8 1 3/8 1 3/8 11/32 SLOT 1-7/8 MAX. 1-1/16 MAX. .53 .53 7/8 MIN. R 11/32 1 9/64 .078 1/4 (2X) 5/64 BRACKET (REF.) 5/64 BRACKET (REF.) AP-1 Air Pilots right Angle Mounting Bracket Cam Actuator CA-1 These low friction units incorporate a lip seal on This bracket is used to mount any valve This unit is made of electroless the piston. The valve returns the piston. One lock which has 15/32-32 thread. nickel plated (.073) thick steel. MB-1 nut is required when installed without a bracket. The roller is tough acetal. Images shown may not represent all part numbers listed. Porting Model Number Configuration Operator Inlet Outlet A0-30-1 3-Way Non-Passing Push Button 1/8" NPT 10/32" AP-1 — Air Pilots — — CA-1 — Cam Roller — — CA-2 — Valve — — F0-30-1 3-Way Non-Passing Toggle Momentum 1/8" NPT 10/32" H0-30-1 3-Way Non-Passing Toggle Entered 1/8" NPT 10/32" MB-1 — Right Angle Mtg Bracket — — MB-1F — Flat Mounting Bracket — — 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-50 DIRECTIONAL CONTROL VALVES DP-100 Series Digital Pressure Sensor FEATUrES: • .2% Full Scale repeatability • Programmable 3 Color Dual Display • Tactile Buttons • Economical • Easy to Configure Images shown may not represent all part numbers listed. Model Number Type Rated Pressure Range Pressure Port Output DP102-N Pressure/Vacuum -14.6 – 145 PSI M5 Female / 1/8" NPTM NPN DP102-N-P Pressure/Vacuum -14.6 – 145 PSI M5 Female / 1/8" NPTM PNP 2 *other pressure ranges available upon request MS-DP1-1 Sensor Mounting Bracket The Micro Gauge Pneumadyne’s new Micro Gauge, with a Indicator: red painted brass face less than 1" (23 mm) in diameter, is Bourdon Tube: Spiral Beryllium copper, soft ideal for applications with limited space. soldered to socket. Socket: Brass with 9/16" wrench flats Materials of Construction Connection: 1/8 NPT back Face: Polycarbonate repeatability: Better than 1% Case: Black, ABS Blend Accuracy: +/- 5% full scale Dial: Aluminum, black figures on white back- Operating Temperature: -40°F to 150°F ground Packaging: Individually bagged OrDErING INFOrMATION: MODEl NO. PMG-160 A B C D E F Inches 29/32 35/64 1-5/64 43/64 9/16 1/8 (mm) (23) (14) (27) (17) (15) NPT Guide To Ordering Valves IF yOU KNOW THE SErIES yOU rEqUIrE, consult the table of contents to find you need a 2, 3 or 4-way valve (See Note 1 at the foot of this page); next decide the series you have selected. The section is laid out so that the most commonly the flow and port size required. Then consult the table of contents. used valves are illustrated and all the options are displayed in tables. IN EITHEr CASE, the check list below will help you determine the exact model IF yOU DO NOT KNOW WHICH SErIES yOU rEqUIrE, first decide whether code you require. step 1 – 2 or 3 wAy vAlves oR step 1 – 4 wAy vAlves (A MAc 2 way is a 3 Way with one port plugged) Normally Closed or Normally Open? Single operator, spring return or double operator? ® ® Pressure range: 25 to 150 PSI or below 25 PSI? Pressure range: 25 to 150 PSI (single operator)? (See Note 2) ® ® (below 25 PSI on external pilot connection is required for 10 to 150 PSI (double operator)? (See Note 4) (below these minimum pilot operated valves) (See Note 2 below) an external pilot connection is required for pilot operated valves) ® Single operator, spring return? (See Note 3 below) ® 2 position or 3 position? If 3 position: which center position? open closed or pressure center ? step 2 – whAt kind of opeRAtoR? step 3 – flow? whAt is the Cv RequiRed? Solenoid, remote air or Mechanical? Port size? (NPTF) ® ® If remote air or mechanical, go to step 3. Valve mounting: inline? stacking? manifold base? circuit bar™? (See Note 5) ® ® ® If solenoid, AC or DC? If DC, what voltage and power (watts)? ® Integral pressure regulators? (See Note 5) Electrical connections? (See Note 5) Integral flow controls? (See Note 5) ® ® Note 1: All MAC 4 Ways can be used as 3 Ways or 2 Ways by simply plugging the appropriate Note 3: MAC 3 Ways are all single operated spring return. For double operated 3 Ways, use port or ports; however in certain applications where considerations of size, speed, flow or cost a 4 Way and plug the appropriate cylinder port. are important, it may be preferable to select a 3 Way valve for a 3 Way application. Note 4: For 3 position valves, minimum operating pressure is 25 psi. Note 2: Minimum pressure for the internally piloted 55 series valves is 30 psi. Maximum pressure for the 35 and 45 series is 120 psi. Note 5: Check series for availability. 9-10 Revisions will be published online Call Toll Free: 800-783-5161 or online at www.actionauto.com 2-51 DIRECTIONAL CONTROL VALVES ® Precautions Concerning the Application, Installation and Service of MAC Valves The precautions below are important to be read and understood before Accidental activation of a manual operator could create a dangerous designing into a system any MAC valve, and before installing or servicing situation. If intentional or accidental operation of a valve by a manual any MAC valve. Improper use, installation or servicing of any MAC valve operator could create a dangerous situation then the “no operator” option in some systems could create a hazard to personnel or equipment. should be used. APPLICATION PRECAUTIONS: REMOTE AIR OPERATED VALVES INDUSTRIAL USE – Pilot valves supplying signal pressure to remote air operated valves should MAC valves are intended for use in industrial pneumatic and/or vacuum be 3-way valves with adequate supply and exhaust capacity to provide systems. They are not intended far consumer use or service. They are positive pressurizing and exhausting of the pilot supply line. Pilot lines general purpose industrial valves with literally thousands of different should be open to exhaust when valves are deenergized. applications in industrial systems. These products are not inherently dangerous, but they are only a component of an overall system. The lNSTALLATION PRECAUTIONS: system in which they are used must provide adequate safeguards to A. Do not install MAC valves on a machine without first turning off air prevent injury or damage in the event failure occurs, whether it be failure (bleed system completely) and electricity to the machine. 2 of switches, regulators, cylinders, valves or any other component. B. MAC valves should only be installed by qualified, knowledgeable personnel who understand how the specific valve is to be pneumatically POWER PRESSES – piped and electrically connected (where applicable). Flow paths through MAC valves are not designed nor intended to be used to operate and/ the valve are shown in the catalog and on the valve by use of ANSI or ar control the operation of clutch and/or brake systems on power presses. ISO type standard graphic symbols. Do not install unless these symbols There are special products on the market for such use. and the valve functions and operations are thoroughly understood. 2-POSITION VALVES – SERVICE PRECAUTIONS: Some MAC valves are 2-position, 4-way valves. When air is supplied to A. Do not service or remove from service any MAC valve without first the inlet port(s) of these valves, there will always be a flow path from the shuting off both the air and electricity to the valve and making certain no inlet to one of the outlets regardless of which of the two positions the valve pressurized air which could present a hazard is retained in the system. is situated. Therefore, if pressurized air retained in the system would present B. MAC valves should only be serviced or removed from service by a hazard in the application or servicing of the valve or system, a separate qualified, knowledgeable personnel who understand how the specific method in the system must be provided to remove the trapped air. valve is piped and used and whether there is air retained in the connecting lines to the valve or electric power still connected to the valve. 3-POSITION VALVES – C. MAC valves are never to be stepped an while working on a machine. Some MAC valves are 3-position, 4-way valves. These valves are either Damage to the valve, or lines to the valve (either air or electrical lines) or double solenoid or double remote air operated. If either of the two accidental activating of a manual operator on the valve could result in a operators is in control, air supplied to the inlet port(s) will pass through dangerous situation. the valve to one of the outlets as on 2-position, 4-way valves. However, if neither operator is in control, the valve moves to a center position. Listed WARNING: below are the various center position functions: Under no circumstances are MAC valves to be used an power presses for air clutch and/or brake operations where failure of the valve to operate A. CLOSED CENTER – as intended could in any way jeopardize the safety of the operator or any With this type valve, when in the center position all ports are blocked other person. Under no circumstances are MAC valves to be used in any (inlets and exhausts) meaning the air at both outlet ports is trapped. circuit or in any manner intended to prevent unintended operation of any If trapping the air in bath outlet ports would present a hazard in the machinery or other equipment where failure of the valve to operate as application or servicing, a separate method in the system must be intended could jeopardize the safety of the operator or any other person. provided to remove the trapped air or this type valve should not be used. Air valves are not safety devices nor should they be used in safety systems of any type. B. OPEN CENTER – With this type valve, when in the center position, the inlet port(s) is LIMITATION OF GUARANTEE blocked and the two outlet parts are open to the exhaust port(s) of the This Guarantee is limited to the replacement or rebuilding of any valve valve. If having no air in either outlet part would present a hazard in the which should fail to operate properly. Valves, under the MAC Guarantee, application or servicing, this type valve should not be used. must be returned (with or without bases) transportation prepaid and received at our factory within the Guarantee period. They will be returned C. PRESSURE CENTER – to the customer at the expense of MAC Valves, Inc., and will carry the With this type valve, when in the center position, the inlet port(s) is same guarantee as provided under the Flat Rate Rebuild Program. connected to both outlet parts of the valve. If having pressurized air to either or both outlet ports would present a hazard in the application or DISCLAIMER OF GUARANTEE servicing of the valve or system, a separate method in the system must be No claims for labor, material, time, damage, or transportation are provided to remove the retained air. allowable nor will any valve be replaced or rebuilt under this guarantee which has been damaged by the purchaser not in the normal course of OPERATING SPECIFICATIONS – its use and maintenance during the warranty period. Thus guarantee does MAC valves are to be installed only on applications that meet all not apply to loss or damage caused by fire, theft, riot, explosion, labor operating specifications described in the MAC catalog for the valve. dispute, act of God, or other causes beyond the control of MAC Valves, lnc. MAC Valves, Inc. shall in no event be liable for remote, special MANUAL OPERATORS – or consequential damages under the MAC Guarantee, nor under any Most MAC valves can be ordered with manual operators. Manual implied warranties, including the implied warranty of merchantability. operators when depressed, are designed to shift the valve to the same position as would the corresponding solenoid or remote air pilot operator The above Guarantee is our manner of extending the engineering and if it were activated. Care must be taken to order a type, if any, that will service resources of the MAC Valves, Inc. organization to assure our be safe for the physical location of the manual operator in the system. customer long, and continued satisfaction. 9-10 Revisions will be Call Toll Free: 800-783-5161 or online at www.actionauto.com published online 2-52