MODEL: W5VS 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) Terminal Block Dual Output Signal Conditioners W5-UNIT 0: Specify voltage (See INPUT SPECIFICATIONS) (CE not available. Power suffix code M, R2, P only.) SIGNAL TRANSMITTER 01: Specify voltage (See INPUT SPECIFICATIONS) Functions & Features (Choose 01 for CE. Power suffix code R only.) • Converts a DC input into two isolated outputs 02: Specify voltage (See INPUT SPECIFICATIONS) • Two independent output ranges (CE not available. Power suffix code M, R2, P only.) • Four-way isolation (input to output 1 to output 2 to power) • Fast response type available [2] OUTPUT 1 • High-density mounting Current • CE marking for 24 V power A: 4 – 20 mA DC (Load resistance 550 Ω max.) 45 (1.77) B: 2 – 10 mA DC (Load resistance 1100 Ω max.) C: 1 – 5 mA DC (Load resistance 2200 Ω max.) D: 0 – 20 mA DC (Load resistance 550 Ω max.) 97 E: 0 – 16 mA DC (Load resistance 685 Ω max.) (3.82) F: 0 – 10 mA DC (Load resistance 1100 Ω max.) G: 0 – 1 mA DC (Load resistance 11 kΩ max.) 41 (1.61) Z: Specify current (See OUTPUT SPECIFICATIONS) mm (inch) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) MODEL: W5VS-[1][2][3]-[4][5] 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) ORDERING INFORMATION 5: 0 – 5 V DC (Load resistance 500 Ω min.) Specify a code from below for each [1] through [5]. 6: 1 – 5 V DC (Load resistance 500 Ω min.) When only one output is needed, select code Y for Output 2, 4W: -10 – +10 V DC (Load resistance 2000 Ω min.) [3]. 5W: -5 – +5 V DC (Load resistance 1000 Ω min.) • Code number: W5VS-[1][2][3]-[4][5] 0: Specify voltage (See OUTPUT SPECIFICATIONS) (e.g. W5VS-6A6-R/K/Q) Specify variables. [3] OUTPUT 2 • Special input and output ranges (For codes Z & 0) Same range availability as Output 1 • Specify the specification for option code /Q Y: None (e.g. /C01/V01) [4] POWER INPUT [1] INPUT AC Power Current M: 85 – 264 V AC (Operational voltage range 85 – 264 V, A: 4 – 20 mA DC (Input resistance 249 Ω) 47 –66 Hz) B: 2 – 10 mA DC (Input resistance 499 Ω) (CE not available) C: 1 – 5 mA DC (Input resistance 1000 Ω) DC Power D: 0 – 20 mA DC (Input resistance 49.9 Ω) R: 24 V DC E: 0 – 16 mA DC (Input resistance 61.9 Ω) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) F: 0 – 10 mA DC (Input resistance 100 Ω) R2: 11 – 27 V DC G: 0 – 1 mA DC (Input resistance 1000 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) H: 10 – 50 mA DC (Input resistance 20 Ω) (CE not available) Z: Specify current (See INPUT SPECIFICATIONS) P: 110 V DC Voltage (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) 16: 0 – 60 mV DC (Input resistance 1 MΩ min.) (CE not available) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) http://www.m-system.co.jp/ W5VS SPECIFICATIONS ES-8513 Rev.9 Page 1/3 MODEL: W5VS Offset: Max. 1.5 times span [5] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) OUTPUT SPECIFICATIONS /K: Fast Response (Approx. 25 msec.) ■ DC Current: 0 – 20 mA DC Other Options Minimum span: 1 mA blank: none Offset: Max. 1.5 times span /Q: Option other than the above (specify the specification) Load resistance: Output drive 11 V max. ■ DC Voltage: -10 – +12 V DC Spans: Min. 5 mV, max. 20 V SPECIFICATIONS OF OPTION: Q (multiple selections) Offset: Max. 1.5 times span COATING (For the detail, refer to M-System's web site.) Load resistance: Output drive 10 mA max.; 5 mA for /C01: Silicone coating negative voltage output; at ≥ 0.5 V /C02: Polyurethane coating /C03: Rubber coating ADJUSTMENT INSTALLATION /V01: Multi-turn fine adjustment Power Consumption /VN: Sealed adjustment holes •AC: Approx. 4 VA at 100 V Approx. 5 VA at 200 V GENERAL SPECIFICATIONS Approx. 6 VA at 264 V Construction: Terminal block •DC: Approx. 3 W Connection Operating temperature: -5 to +55°C (23 to 131°F) Input: M3.5 screw terminals (torque 0.8 N·m) Operating humidity: 0 to 90 %RH (non-condensing) Output & power: M3 screw terminals (torque 0.8 N·m) Mounting: DIN rail Screw terminal: Nickel-plated steel Weight: 130 g (0.29 lbs) Housing material: Flame-resistant resin (black) Isolation: Input to output 1 to output 2 to power Overrange output: Approx. -10 to +120 % at 1 – 5 V PERFORMANCE in percentage of span Zero adjustment: -2 to +2 % (front) Accuracy: ±0.1 % (±1 % with the input suffix codes 4W and 5W selected) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Span adjustment: 98 to 102 % (front) Line voltage effect: ±0.1 % over voltage range (99 to 101 % with the input suffix codes 4W and 5W Insulation resistance: ≥ 100 MΩ with 500 V DC selected.) Dielectric strength: 2000 V AC @1 minute (input to output 1 or output 2 to power to ground) INPUT SPECIFICATIONS 1000 V AC @1 minute (output 1 to output 2) ■ DC Current: Input resistor incorporated Specify input resistance value for code Z. (R ≤ 0.125 W ÷ [F.S. Current]2) STANDARDS & APPROVALS ■ DC Voltage CE conformity: Input resistance: 1 MΩ min.; 10 kΩ min. for the input code EMC Directive (2004/108/EC) 02 EMI EN 61000-6-4: 2007 10 kΩ min. at power loss EMS EN 61000-6-2: 2005 •Input code 0 (Not CE) Voltage range: -300 – +300 V DC Minimum span: 100 mV Offset: Max. 1.5 times span •Input code 01 (CE) Voltage range: -70 – +70 V DC Minimum span: 100 mV Offset: Max. 1.5 times span •Input code 02 (Not CE) Voltage range: -100 – +100 mV DC Minimum span: 5 mV http://www.m-system.co.jp/ W5VS SPECIFICATIONS ES-8513 Rev.9 Page 2/3 MODEL: W5VS DIMENSIONS unit: mm (inch) 7.4 (.29) 5–M3.5 SCREW 1 2 3 4 5 DIN RAIL 35mm wide 6 (.24) 6 7 8 9 10 11 45 (1.77) 41 (1.61) [3.3 (.13)] 6–M3 SCREW • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 4 6 + Amplifier Driver * INPUT OUTPUT 1 – 5 7 – Z S 1 Output + 8 Driver 2 OUTPUT 2 – 9 3 10 U(+) POWER 11 V(–) *Input shunt resistor attached for current input. Remark 1: The section enclosed by broken line is only with 2nd output option. Remark 2: DO NOT connect to the terminals 1 – 2 – 3. Specifications are subject to change without notice. http://www.m-system.co.jp/ W5VS SPECIFICATIONS ES-8513 Rev.9 Page 3/3 3 (.12) 94 (3.70)