Manufacturers
M-SYSTEMS W5TS
Description
M-Systems W5TS W5-UNIT Series Terminal Block Dual Output Signal Conditioner; Thermocouple Transmitter
Part Number
W5TS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
TBD
Specifications
AC Power input
Approx. 4 VA at 100 V; Approx. 5 VA at 200 V; Approx. 6 VA at 264V
Accuracy
(whichever is greater) K, E, J: ±0.1 % of FS or ±0.2°C; T, N: ±0.2 % of FS or ±0.2°C; PR, B, R, S: ±0.3 % of FS (at over 400°C for R, S and PR; over 770°C for B)
Burnout response
Less than or equal to 10 sec.
Cold junction compensation
CJC sensor attached to theinput terminals
Cold junction compensation error
(at 20°C ±10°C or 68°F ±18°F)K, E, J, T, N: ±0.5°C or ±0.9°F; S, R, PR: ±1°C or ±1.8°F
Construction
Terminal block
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (input to output 1 or output 2 to power to ground); 1000 V AC @1 minute (output 1 to output 2)
Housing material
Flame-resistant resin (black)
Input Connection
M3.5 screw terminals (torque 0.8 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output 1 to output 2 to power
Line voltage effect
±0.1 % over voltage range
Linearization
Standard
Mounting
DIN rail
Operating humidity
0 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Output & power Connection
M3 screw terminals (torque 0.8 N•m)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Screw terminal
Nickel-plated steel
Span adjustment
98 to 102 % (front)
Temp. coefficient:
±0.015 %/°C (±0.008 %/°F) (at over 400°C for R, S and PR; over 770°C for B)
Weight
130 g (0.29 lbs)
Zero adjustment
-2 to +2 % (front)
Features
- Accepts direct input from a thermocouple
- CE marking for 24 V power
- Cold junction compensation
- Fast response type available
- Four-way isolation (input to output 1 to output 2 to power)
- High-density mounting
- Linearization and burnout
- Two independent output ranges
Datasheet
Extracted Text
MODEL: W5TS Terminal Block Dual Output Signal Conditioners W5-UNIT [2] OUTPUT 1 Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) THERMOCOUPLE TRANSMITTER B: 2 – 10 mA DC (Load resistance 1100 Ω max.) Functions & Features C: 1 – 5 mA DC (Load resistance 2200 Ω max.) • Accepts direct input from a thermocouple D: 0 – 20 mA DC (Load resistance 550 Ω max.) • Two independent output ranges E: 0 – 16 mA DC (Load resistance 685 Ω max.) • Four-way isolation (input to output 1 to output 2 to power) F: 0 – 10 mA DC (Load resistance 1100 Ω max.) • Linearization and burnout G: 0 – 1 mA DC (Load resistance 11 kΩ max.) • Cold junction compensation Z: Specify current (See OUTPUT SPECIFICATIONS) • Fast response type available Voltage • High-density mounting 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) • CE marking for 24 V power 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 100 Ω min.) 45 (1.77) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) 97 0: Specify voltage (See OUTPUT SPECIFICATIONS) (3.82) [3] OUTPUT 2 41 (1.61) Same range availability as Output 1 mm (inch) Y: None MODEL: W5TS-[1][2][3]-[4][5] [4] POWER INPUT AC Power ORDERING INFORMATION M: 85 – 264 V AC (Operational voltage range 85 – 264 V, Specify a code from below for each [1] through [5]. 47 –66 Hz) When only one output is needed, select code Y for Output 2, (CE not available) [3]. DC Power • Code number: W5TS-[1][2][3]-[4][5] R: 24 V DC (e.g. W5TS-2A6-R/K/BL/Q) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Specify variables. R2: 11 – 27 V DC • Temperature range (e.g. 0 – 800°C) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) • Special output range (For codes Z & 0) (CE not available) • Specify the specification for option code /Q P: 110 V DC (e.g. /C01/V01) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) (CE not available) [1] INPUT THERMOCOUPLE 1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) [5] OPTIONS (multiple selections) 2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) RESPONSE TIME (0 – 90 %) 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) blank: Standard (≤ 0.5 sec.) 4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) /K: Fast Response (Approx. 25 msec.) 5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) BURNOUT 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) blank: Upscale burnout 7: R (Usable range -50 to +1760°C, -58 to +3200°F) /BL: Downscale burnout 8: S (Usable range -50 to +1760°C, -58 to +3200°F) /BN: No burnout N: N (Usable range -270 to +1300°C, -454 to +2372°F) OTHER OPTIONS 0: Specify blank: none /Q: Option other than the above (specify the specification) http://www.m-system.co.jp/ W5TS SPECIFICATIONS ES-8512 Rev.5 Page 1/4 MODEL: W5TS satisfied when the temperature ranges below 0°C. Consult SPECIFICATIONS OF OPTION: Q (multiple selections) factory. COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating OUTPUT SPECIFICATIONS /C03: Rubber coating • DC Current: 0 – 20 mA DC ADJUSTMENT Minimum span: 1 mA /V01: Multi-turn fine adjustment Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. • DC Voltage: -10 – +12 V DC GENERAL SPECIFICATIONS Spans: Min. 5 mV, max. 20 V Construction: Terminal block Offset: Max. 1.5 times span Connection Load resistance: Output drive 10 mA max.; 5 mA for Input: M3.5 screw terminals (torque 0.8 N·m) negative voltage output; at ≥ 0.5 V Output & power: M3 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (black) INSTALLATION Isolation: Input to output 1 to output 2 to power Power Consumption Overrange output: Approx. -10 to +120 % at 1 – 5 V •AC Power input: Zero adjustment: -2 to +2 % (front) Approx. 4 VA at 100 V Span adjustment: 98 to 102 % (front) Approx. 5 VA at 200 V Linearization: Standard Approx. 6 VA at 264 V Cold junction compensation: CJC sensor attached to the •DC Power input: Approx. 3 W input terminals Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail INPUT SPECIFICATIONS Weight: 130 g (0.29 lbs) Minimum span: 3 mV Input resistance: 20 kΩ min. Burnout sensing: 0.1 μA PERFORMANCE in percentage of span Accuracy (whichever is greater) Lower temperature range & span (in °C) K, E, J: ±0.1 % of FS or ±0.2°C (PR): Lower range 0 to 880°C; min. span 370°C T, N: ±0.2 % of FS or ±0.2°C K (CA): Lower range -270 to +1200°C; min. span 75°C PR, B, R, S: ±0.3 % of FS E (CRC): Lower range -270 to +750°C; min. span 50°C (at over 400°C for R, S and PR; over 770°C for B) J (IC): Lower range -210 to +800°C; min. span 60°C Cold junction compensation error T (CC): Lower range -270 to +325°C; min. span 75°C (at 20°C ±10°C or 68°F ±18°F) B (RH): Lower range 0 to 750°C; min. span 780°C K, E, J, T, N: ±0.5°C or ±0.9°F R: Lower range -50 to +550°C; min. span 360°C S, R, PR: ±1°C or ±1.8°F S: Lower range -50 to +550°C; min. span 380°C Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) N: Lower range -270 to +1100°C; min. span 110°C (at over 400°C for R, S and PR; over 770°C for B) Burnout response: ≤ 10 sec. Lower temperature range & span (in °F) Line voltage effect: ±0.1 % over voltage range (PR): Lower range 32 to 1616°F; min. span 670°F Insulation resistance: ≥ 100 MΩ with 500 V DC K (CA): Lower range -454 to +2192°F; min. span 140°F Dielectric strength: E (CRC): Lower range -454 to +1382°F; min. span 90°F 2000 V AC @1 minute (input to output 1 or output 2 to J (IC): Lower range -346 to +1472°F; min. span 110°F power to ground) T (CC): Lower range -454 to +617°F; min. span 140°F 1000 V AC @1 minute (output 1 to output 2) B (RH): Lower range 32 to 1382°F; min. span 1450°F R: Lower range -58 to +1022°F; min. span 680°F S: Lower range -58 to +1022°F; min. span 700°F N: Lower range -454 to +2012°F; min. span 200°F Remark: The described accuracy may be partially not http://www.m-system.co.jp/ W5TS SPECIFICATIONS ES-8512 Rev.5 Page 2/4 MODEL: W5TS STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) DIMENSIONS unit: mm (inch) 7.4 (.29) 5–M3.5 SCREW 1 2 3 4 5 DIN RAIL 35mm wide 6 (.24) 6 7 8 9 10 11 45 (1.77) 41 (1.61) [3.3 (.13)] 6–M3 SCREW • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) CJC SENSOR (model: CJM) 1 2 3 4 5 6 7 8 9 10 11 http://www.m-system.co.jp/ W5TS SPECIFICATIONS ES-8512 Rev.5 Page 3/4 3 (.12) 94 (3.70) 20 (.8) max. MODEL: W5TS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Burnout comp. leadwire Z S Isolation T/C + Low Drift Output + + 4 Linearizer Amplifier 6 Amplifier Driver OUTPUT 1 – – 7 metal leg – Z S * 5 Output CJC * 8 + Driver SENSOR Cold Junction 3 OUTPUT 2 Compensation 9 – model: CJM 1 10 U(+) 2 POWER 11 V(–) *Deleted with B thermocouple Remark 1: The section enclosed by broken line is only with 2nd output option. Remark 2: DO NOT connect to the terminals 1 – 2. Specifications are subject to change without notice. http://www.m-system.co.jp/ W5TS SPECIFICATIONS ES-8512 Rev.5 Page 4/4
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the W5TS have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods