Manufacturers
M-SYSTEMS W5DY
Description
M-Systems W5DY W5-UNIT Series Terminal Block Dual Output Signal Conditioner; Current Loop Supply
Part Number
W5DY
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
TBD
Specifications
AC Power input
Approx. 4 VA at 100 V; Approx. 5 VA at 200 V; Approx. 6 VA at 264 V
Accuracy
±0.1 %
Construction
Terminal block
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (input to output 1 or output 2 to power to ground); 1000 V AC @1 minute (output 1 to output 2)
Housing material
Flame-resistant resin (black)
Input
M3.5 screw terminals (torque 0.8 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output 1 to output 2 to power
Line voltage effect
±0.1 % over voltage range
Mounting
DIN rail
Operating humidity
0 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Output & power
M3 screw terminals (torque 0.8 N•m)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Screw terminal
Nickel-plated steel
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
130 g (0.29 lbs)
Zero adjustment
-2 to +2 % (front)
Features
- CE marking for 24 V DC power
- Fast response type available
- Four-way isolation (input to output 1 to output 2 to power)
- High-density mounting
- Powers a 4 – 20 mA DC current loop
- Two independent output ranges
Datasheet
Extracted Text
MODEL: W5DY 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) Terminal Block Dual Output Signal Conditioners W5-UNIT 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) CURRENT LOOP SUPPLY 5: 0 – 5 V DC (Load resistance 500 Ω min.) Functions & Features 6: 1 – 5 V DC (Load resistance 500 Ω min.) • Powers a 4 – 20 mA DC current loop 4W: -10 – +10 V DC (Load resistance 2000 Ω min.) • Two independent output ranges 5W: -5 – +5 V DC (Load resistance 1000 Ω min.) • Four-way isolation (input to output 1 to output 2 to power) 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Fast response type available • High-density mounting [2] OUTPUT 2 • CE marking for 24 V DC power Same range availability as Output 1 Y: None 45 (1.77) [3] POWER INPUT AC Power 97 (3.82) M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 –66 Hz) (CE not available) 41 (1.61) mm (inch) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) MODEL: W5DY-[1][2]-[3][4] R2: 11 – 27 V DC (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (CE not available) ORDERING INFORMATION P: 110 V DC Specify a code from below for each [1] through [4]. (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) When only one output is needed, select code Y for Output 2, (CE not available) [2]. • Code number: W5DY-[1][2]-[3][4] (e.g. W5DY-A6-R2/K/Q) [4] OPTIONS (multiple selections) Specify variables. Response Time (0 – 90 %) • Special output range (For codes Z & 0) blank: Standard (≤ 0.5 sec.) • Specify the specification for option code /Q /K: Fast Response (Approx. 25 msec.) (e.g. /C01) Other Options blank: none /Q: Option other than the above (specify the specification) INPUT Current 4 – 20 mA DC (Input resistance 249.5 Ω) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating [1] OUTPUT 1 /C02: Polyurethane coating Current /C03: Rubber coating A: 4 – 20 mA DC (Load resistance 550 Ω max.) B: 2 – 10 mA DC (Load resistance 1100 Ω max.) C: 1 – 5 mA DC (Load resistance 2200 Ω max.) GENERAL SPECIFICATIONS D: 0 – 20 mA DC (Load resistance 550 Ω max.) Construction: Terminal block E: 0 – 16 mA DC (Load resistance 685 Ω max.) Connection F: 0 – 10 mA DC (Load resistance 1100 Ω max.) Input: M3.5 screw terminals (torque 0.8 N·m) G: 0 – 1 mA DC (Load resistance 11 kΩ max.) Output & power: M3 screw terminals (torque 0.8 N·m) Z: Specify current (See OUTPUT SPECIFICATIONS) Screw terminal: Nickel-plated steel Voltage Housing material: Flame-resistant resin (black) 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) Isolation: Input to output 1 to output 2 to power http://www.m-system.co.jp/ W5DY SPECIFICATIONS ES-8526 Rev.7 Page 1/3 MODEL: W5DY Overrange output: Approx. -10 to +120 % at 1 – 5 V STANDARDS & APPROVALS Zero adjustment: -2 to +2 % (front) CE conformity: Span adjustment: 98 to 102 % (front) EMC Directive (2004/108/EC) EMI EN 61000-6-4: 2007 EMS EN 61000-6-2: 2005 SUPPLY OUTPUT (across the terminals 4 – 5) Output voltage: 24 – 28 V DC with no load 20 V DC min. at 20 mA Current rating: ≤ 22 mA DC • Shortcircuit Protection Current limited: 30 mA max. Protected time duration: No limit INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. ■ DC Voltage: -10 – +12 V DC Spans: Min. 5 mV, max. 20 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; 5 mA for negative voltage output; at ≥ 0.5 V INSTALLATION Power Consumption •AC Power input: Approx. 4 VA at 100 V Approx. 5 VA at 200 V Approx. 6 VA at 264 V •DC power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 130 g (0.29 lbs) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output 1 or output 2 to power to ground) 1000 V AC @1 minute (output 1 to output 2) http://www.m-system.co.jp/ W5DY SPECIFICATIONS ES-8526 Rev.7 Page 2/3 MODEL: W5DY DIMENSIONS unit: mm (inch) 7.4 (.29) 5–M3.5 SCREW 1 2 3 4 5 DIN RAIL 35mm wide 6 (.24) 6 7 8 9 10 11 45 (1.77) 41 (1.61) [3.3 (.13)] 6–M3 SCREW • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM 2-WIRE TRANSMITTER Shortcircuit 24V DC + + 4 Protection Supply – – 5 Z S Isolation Low Drift Output + 2 6 + Amplifier Driver MONITOR V OUTPUT 1 – 3 7 – (1 – 5V DC) 249.5Ω Z S 1 Output + 8 Driver OUTPUT 2 – 9 10 U(+) POWER 11 V(–) Remark 1: The section enclosed by broken line is only with 2nd output option. Remark 2: DO NOT connect to the terminal 1. � When Used as DC Supply � When Used as Isolator + + + 4 + 4 2-WIRE XMTR – – 5 – 5 + 2 + 2 INPUT – 3 – 3 249.5Ω 249.5Ω Specifications are subject to change without notice. http://www.m-system.co.jp/ W5DY SPECIFICATIONS ES-8526 Rev.7 Page 3/3 3 (.12) 94 (3.70)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the W5DY have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods