Manufacturers
M-SYSTEMS W2VS
Description
M-Systems W2VS Mini-MW Series Space-saving Dual Output Signal Conditioner; Signal Transmitter
Part Number
W2VS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
TBD
Specifications
AC Power input
Approx. 4 VA at 100 V; Approx. 5 VA at 200 V; Approx. 6 VA at 240 V
Accuracy
±0.1 %
Connection
M3 screw terminals (torque 0.8 N•m)
Construction
Plug-in
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (input or output1 or output 2 to power to ground); 1000 V AC @1 minute (input to output 1 to output 2)
Housing Material
Flame-resistant resin (black)
Insulation resistance
Greater than 100 M Omega with 500 V DC
Isolation
Input to output 1 to output 2 to power
Line voltage effect
±0.1 % over voltage range
Mounting
Surface or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Span adjustment
95 to 105 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
200 g (0.44 lbs)
Zero adjustment
-5 to +5 % (front)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval
- Converts DC input from a sensor into a standard process signal
- Fast response type available
- Fixed range or PC programmable models selectable
- Selectable 100-240V AC/24V DC power input
- Standard DIN rail or surface mounting
- W2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
Datasheet
Extracted Text
Model ZERO SPAN ZERO SPAN MODEL: W2VS FW: -10 – +10 mA DC (Input resistance 100 Ω) Space-saving Dual Output Signal Conditioners Z: Specify current (See INPUT SPECIFICATIONS) Mini-MW Series Voltage 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) SIGNAL TRANSMITTER 15: 0 – 50 mV DC (Input resistance 10 kΩ min.) Functions & Features 16: 0 – 60 mV DC (Input resistance 10 kΩ min.) • Converts DC input from a sensor into a standard process 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) signal 3: 0 – 1 V DC (Input resistance 1 MΩ min.) • Fast response type available 4: 0 – 10 V DC (Input resistance 1 MΩ min.) • CE marking 5: 0 – 5 V DC (Input resistance 1 MΩ min.) • UL approval 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) Typical Applications 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) • Isolation between control room and field instrumentation 0: Specify voltage (See INPUT SPECIFICATIONS) 29.5 (1.16) [2] OUTPUT 1 Current 89 A: 4 – 20 mA DC (Load resistance 750 Ω max.) (3.51) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) 124 (4.88) E: 0 – 16 mA DC (Load resistance 900 Ω max.) mm (inch) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) MODEL: W2VS–[1][2][3]-[4][5] Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) ORDERING INFORMATION 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) • Code number: W2VS-[1][2][3]-[4][5] 3: 0 – 1 V DC (Load resistance 1000 Ω min.) Specify a code from below for each [1] through [5]. 4: 0 – 10 V DC (Load resistance 10 kΩ min.) (e.g. W2VS-6A6-M2/K/CE/Q) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • Special input and output ranges (For codes Z & 0) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Specify the specification for option code ‘Q.’ 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) (e.g. /C01/V01) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) Note: If one of the outputs should be a current range, 0: Specify voltage (See OUTPUT SPECIFICATIONS) specify it for the Output 1 to allow a greater load. [3] OUTPUT 2 [1] INPUT Y: None Current Current A: 4 – 20 mA DC (Input resistance 250 Ω) A: 4 – 20 mA DC (Load resistance 350 Ω max.) A1: 4 – 20 mA DC (Input resistance 50 Ω) B: 2 – 10 mA DC (Load resistance 700 Ω max.) B: 2 – 10 mA DC (Input resistance 500 Ω) C: 1 – 5 mA DC (Load resistance 1400 Ω max.) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Load resistance 350 Ω max.) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC(Load resistance 430 Ω max.) E: 0 – 16 mA DC (Input resistance 62.5 Ω) F: 0 – 10 mA DC (Load resistance 700 Ω max.) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Load resistance 7000 Ω max.) G: 0 – 1 mA DC (Input resistance 1000 Ω) Z: Specify current (See OUTPUT SPECIFICATIONS) H: 10 – 50 mA DC (Input resistance 100 Ω) Voltage J: 0 – 10 μA DC (Input resistance 1000 Ω) Same range availability as Output 1 K: 0 – 100 μA DC (Input resistance 1000 Ω) GW: -1 – +1 mA DC (Input resistance 1000 Ω) http://www.m-system.co.jp/ W2VS SPECIFICATIONS ES-5518 Rev.9 Page 1/4 MODEL: W2VS Specify input resistance value for code Z. [4] POWER INPUT ■ DC Voltage: -300 – +300 V DC AC Power Minimum span: 3 mV M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, Offset: Max. 1.5 times span 47 – 66 Hz) Input resistance (90 – 264 V for UL) Span 3 – 10 mV : ≥ 10 kΩ DC Power Span 10 – 100 mV : ≥ 10 kΩ R: 24 V DC Span 0.1 – 1 V : ≥ 100 kΩ (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Span ≥ 1 V : ≥ 1 MΩ R2: 11 – 27 V DC (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (Select ‘/N’ for ‘Standards & Approvals’ code.) OUTPUT SPECIFICATIONS P: 110 V DC ■ DC Current: 0 – 20 mA DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) Minimum span: 1 mA (110 V ±10 % for UL) Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. for Output 1; 7 V max. for Output 2 [5] OPTIONS (multiple selections) ■ DC Voltage: -10 – +12 V DC (up to 10 V for Output 2) Response Time (0 – 90 %) Minimum span: 5 mV blank: Standard (≤ 0.5 sec.) Offset: Max. 1.5 times span /K: Fast Response (Approx. 25 msec.) Load resistance: Output drive 1 mA max.; at ≥ 0.5 V Standards & Approvlas (must be specified) /N: Without CE or UL /CE: CE marking INSTALLATION /UL: UL approval, CE marking Power Consumption Other Options •AC Power input: blank: none Approx. 4 VA at 100 V /Q: Option other than the above (specify the specification) Approx. 5 VA at 200 V (UL not available) Approx. 6 VA at 240 V •DC power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) SPECIFICATIONS OF OPTION: Q (multiple selections) Operating humidity: 30 to 90 %RH (non-condensing) COATING (For the detail, refer to M-System's web site.) Mounting: Surface or DIN rail /C01: Silicone coating Weight: 200 g (0.44 lbs) /C02: Polyurethane coating /C03: Rubber coating ADJUSTMENT PERFORMANCE in percentage of span /V01: Multi-turn fine adjustment Accuracy: ±0.1 % TERMINAL SCREW MATERIAL Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) /S01: Stainless steel Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output GENERAL SPECIFICATIONS 1 to output 2 to power to ground) Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Housing material: Flame-resistant resin (black) STANDARDS & APPROVALS Isolation: Input to output 1 to output 2 to power CE conformity: Overrange output: Approx. -10 to +120 % at 1 – 5 V EMC Directive (2004/108/EC) Zero adjustment: -5 to +5 % (front) EMI EN 61000-6-4: 2007 Span adjustment: 95 to 105 % (front) EMS EN 61000-6-2: 2005 Low Voltage Directive (2006/95/EC) EN 61010-1: 2001 INPUT SPECIFICATIONS Installation Category II ■DC Current: Pollution Degree 2 Shunt resistor attached to the input terminals (0.5 W) http://www.m-system.co.jp/ W2VS SPECIFICATIONS ES-5518 Rev.9 Page 2/4 MODEL: W2VS Input or output 1 or output 2 to power input: Reinforced insulation (300 V) Input to output 1 to output 2: Basic insulation (300 V) Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (UL 1604:2004, CAN/CSA-C22.2 No.213:1987) UL/C-UL general safety requirements (UL 61010B-1:2003, CAN/CSA-C22.2 No.61010-1:1992) DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 3 2 1 35mm wide 6 5 4 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 9 8 7 11–M3 SCREW 11 10 22 (.87) 29.5 (1.16) 23 (.91) 10 (.39) 84 (3.31) 114 (4.49) [4 (.16)] When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) INPUT RESISTOR (model: REM2) 3 2 1 6 5 4 9 8 7 11 10 Input shunt resistor attached for current input. http://www.m-system.co.jp/ W2VS SPECIFICATIONS ES-5518 Rev.9 Page 3/4 89 (3.50) 53 (2.09) 19 (.75) 59 (2.32) 72 (2.83) 4 (.16) MODEL: W2VS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 7 + * Amplifier Driver INPUT R OUTPUT 1 – 2 8 – Z S 4 Output + 3 Driver 5 OUTPUT 2 – 6 9 10 U(+) POWER 11 V(–) Base Socket *Input shunt resistor attached for current input. Remark: The section enclosed by broken line is only with 2nd output option. Specifications are subject to change without notice. http://www.m-system.co.jp/ W2VS SPECIFICATIONS ES-5518 Rev.9 Page 4/4
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the W2VS have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods